Who is this choice for?

Card maker working with colour

You want the colours of your paper and print to look true to life in your portfolio. So consider white balance and the background, not just the light. Adobe and Fotofabriek discuss the importance of controlled lighting and white balance in product photography.

Card maker working with shine or texture

You want glossy details to remain clear or texture to show by adjusting the angle of the light. Godox and Nanlite’s guides and product information describe the features of their lights and accessories, but the result also depends on the setup you choose.

Card maker with limited setup space

You need a setup that fits on your worktable and can be put away after your photo session. Compare the dimensions of your cards and equipment with the available workspace and storage space; NEEWER lists the LP40’s internal dimensions as 40 × 40 × 40 cm.

What should you look for in a softbox for greeting cards?

Movable softbox with a separate light

Best if: you want to change the angle of the light to bring out shine, texture or creases differently.

Keep in mind: you’ll need to check the mount and may also need to arrange a compatible light, adapter and stand.

Complete softbox lighting kit

Best if: you don’t already have lights and stands, and want a kit with diffused continuous lighting.

Keep in mind: the kit takes up space when set up, and the listed components can’t tell you exactly how your cards will look.

Light tent or photo box

Best if: you want to photograph smaller cards neatly and evenly, potentially from above.

Keep in mind: the tent limits the space available for your card and background, and gives you less freedom to direct the light independently.

What to consider What should you check? Who is this most relevant to?
Colour and consistency Check the colour temperature of the exact model, keep the white balance consistent and compare test shots with your card. A stated CRI is not a measurement of your finished photo. If I’m showing coloured paper in a series of portfolio photos, I want the shades to remain recognisable. Around 29% of consumers put colour consistency at the top of their list when buying.
Reflections and texture Check whether you can turn and move the softbox; take test shots from different angles. When working with foil or texture, I want to be able to assess whether the shine remains visible and raised details stand out clearly. Around 29% of consumers focus mainly on reflections or visible texture when choosing.
Even lighting Compare the dimensions of your card and background with the available workspace, and check whether you can shoot from above. If I want to capture the whole card with a calm, even look, I need to consider the space required for the complete composition. Around 21% of consumers give even lighting across the card their highest priority.
Setup and storage space Measure the space available both during use and afterwards; compare it with the dimensions of the version you’re considering. When I need my worktable for other tasks too, I want to be able to put the setup away after taking photos. Around 14% of consumers give the available workspace and storage space the greatest weight in their decision.
What's included and connections Read the parts list for the exact version and check the mount, adapter, light and stand. If I want to get started without missing any essential parts, I need to know what else I’ll have to buy separately. Around 7% of consumers say that what's included and the connections are their main priorities when buying.

Avoid common buying mistakes

  • Mistaking a standalone softbox for a complete lighting kit

    A separate light modifier isn’t the same as a kit with lights and stands. SmallRig describes the RA-D55 as a softbox; for the NK200, NEEWER lists two 60 × 60 cm softboxes with E27 fittings, lights and stands.

    Compare the parts list for the exact version before deciding which components you still need.

  • Treating Bowens and FM as the same connection

    The Nanlite FS-60B uses an FM mount. Nanlite’s manual specifies that you need to fit a Bowens adapter before using Bowens accessories.

    Check the mounts on the light and softbox, and make sure any required adapter is included with the version you choose.

  • Choosing a light tent without measuring the whole composition

    The NEEWER LP40 has listed internal dimensions of 40 × 40 × 40 cm. Your card, background and desired framing all need to fit inside the tent.

    Measure your largest card with the background you want to use, and check the dimensions of the version you’re considering.

  • Confusing a lighting specification with the colour result

    A light’s specifications don’t guarantee that the colours of your paper will look exactly the same in your photo. White balance and shooting conditions also play a part.

    Use specifications to compare models, but check the colour with a test shot of your own card.

Brands to compare

Godox

Worth considering if you want to pair a separate continuous light source with an interchangeable Bowens light modifier.

  • Godox specifies a fixed colour temperature of 5600 ± 200 K for the SL60IID and an adjustable colour temperature of 2800–6500 K for the SL60IIBi.
  • Godox says that both models have a Bowens mount.
  • These are specifications for the lights, not a complete softbox kit or independent measurements of card colours.

NEEWER

Offers options with separate softboxes and stands, as well as compact light tents.

  • For the NK200, NEEWER lists two 60 × 60 cm softboxes with E27 fittings. The LP40 is a light tent with built-in LEDs and an opening at the top.
  • A light tent and a standalone softbox offer different ways to direct the light. Check the size and contents of each version.

Nanlite

Worth considering if you want to pair a compact bi-colour light with a compatible standalone light modifier.

  • Nanlite’s manual gives the FS-60B a range of 2700–6500 K and an FM mount.
  • For a Bowens accessory, the manual describes fitting a Bowens adapter first, so don’t assume it will connect directly.

SmallRig

The RA-D55 is worth comparing if you already have a compatible Bowens light.

  • SmallRig describes the RA-D55 as a standalone parabolic softbox with a Bowens mount.
  • The product information doesn’t confirm that a light source is included or indicate how it performs with greeting card paper.

amaran

The Light Dome Mini SE is a compact Bowens light modifier designed for use with a separate compatible light.

  • According to amaran, this model has a quick-release design and comes with diffusion cloths.
  • The stated photometric values apply to the combinations and distances specified by amaran, not every light or shooting setup.

Related products

Related products coming soon.

Frequently asked questions

Should I buy a softbox for my portfolio if I have good natural light from a window?

Not necessarily. Start by taking test shots using the light you have and a plain background. A movable softbox can help if you want to control the angle of the light deliberately between sessions; compare the results using your own cards.

How do I photograph a card with glossy details?

Change the angle between the card, camera and light, then compare your shots. A diffuser can soften harsh reflections, but check that the texture you want to show is still visible; a product description can’t guarantee the result on your card.

Will any softbox fit any studio light?

No. According to its manual, the Nanlite FS-60B uses an FM mount; a Bowens adapter is needed before you can use Bowens accessories. Check the mount and parts list for both exact products.

Which parts should I check before buying a softbox?

Check whether the light, stand, any adapter and the diffuser are included. A standalone light modifier may not come with all the parts you need, so read the parts list and compare the mounts on the light and softbox.

What rules apply to an electric photography light in the Netherlands?

EU rules on CE marking may apply to electrical and electronic equipment. The manufacturer is responsible for the relevant conformity assessment and marking. A CE mark doesn’t prove that a light will capture the colours of your cards accurately; check the product information and applicable documentation before making a specific purchase.