Who is this guide for?

Creator who wants to keep the work surface in shot

You want both your hands and materials to be visible while you explain what you’re doing. So start by considering where the light will go and how widely it will spread, then choose your setup.

Creator filming in changing daylight

You’re looking for continuous light that you can readjust when the ambient light changes. Check whether the light itself is dimmable and has adjustable colour temperature.

Creator with limited space around the desk

You need to place the lighting on or near your desk, so consider its size and mounting options alongside how much of the work surface needs to be in shot.

What should you consider when choosing?

What to consider What should you check? Who is this important for?
Coverage of the work surface Check the size and position of the diffuser; make a test recording of your hands and materials. I want my hands and materials to be clearly visible at the same time; around 33% of consumers prioritise coverage of the work surface.
Adjustable lighting Check whether the light is dimmable and whether you can adjust its colour temperature. If I film at different times, I want to be able to adjust the light; around 27% of consumers prioritise adjustability.
Space for the setup Measure the space available for the light and stand; check the mounting options. With limited space around my desk, I want a setup that stays out of the way; around 20% of consumers prioritise the space needed for the setup.
Compatibility and components Check the exact fitting, light and stand mount; see what’s included in the version you’re considering. If I already have a light, I want to choose a compatible light modifier without buying duplicate components unnecessarily; around 20% of consumers prioritise making use of lighting they already own.

Common buying mistakes

  • Mistaking a standalone softbox for a complete video light

    A softbox diffuses light, but it doesn’t produce it. Without a suitable light and mount, you may not be able to use it in your setup.

    Compare the package contents and exact fitting with the components you already own.

  • Assuming a stated light output is the same as the illumination on your work surface

    Godox gives the SL60IIBi’s light output under specific conditions with a standard reflector. This doesn’t tell you how much light will reach your filming area with every softbox.

    Compare the measurement conditions and check the illumination on your work surface in the setup you plan to use.

  • Choosing a softbox based only on its diameter

    A larger diffuser needs more space, while a compact light won’t necessarily illuminate the whole work surface evenly.

    Measure the space beside your desk and camera, and check the size, direction of the light and mounting options.

Brands to consider

NEEWER

The NK200 range includes continuous-light kits with softboxes and stands. It could be a good fit if you don’t have a lighting setup yet.

  • According to its EU product information, the NK200 has 60 × 60 cm softboxes with E27 fittings.
  • The lights described are 35 W and have a stated colour temperature of 5700 K. Check the exact version and how many lights are included.

Godox

The SL60IIBi is a standalone continuous light with a Bowens mount, designed for use with a compatible light modifier that you choose separately.

  • Godox states that this model has 0–100% dimming and an adjustable colour temperature of 2800–6500 K.
  • Check that the softbox and stand are suitable for your setup. The stated light output with a standard reflector isn’t a measurement taken through a softbox.

SmallRig

The RA-D30 is a standalone light modifier for a compatible RC 60B setup.

  • SmallRig describes it as a quick-to-assemble softbox with a honeycomb grid.
  • The product information refers to the RC 60B. Don’t assume it’s compatible with every Bowens or other RC light; a light source isn’t necessarily included.

amaran

The range includes standalone Light Dome modifiers, including a 60 cm version for a compact setup.

  • amaran describes the Light Dome 60 as a quick-to-assemble light modifier with a diameter of 60 cm.
  • The size doesn’t tell you how much light a separately chosen light will produce. Check the mount and package contents.

Elgato

The Key Light Mini is a compact diffused video light, not a softbox. It could be an alternative if space is limited.

  • Elgato states that it has adjustable brightness, a colour temperature of 2900–7000 K and dimensions of 147 × 100 × 17 mm.
  • Check that its small light panel and available mounting options are suitable for the whole work surface you want to film.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need a light if I buy a softbox?

Yes. If you buy a standalone softbox, you’ll also need a compatible light if you don’t already have one. For a kit, check whether the light and stand are included; for a standalone modifier, check that the fitting is compatible.

How can I avoid shadows from my hands while I explain what I’m doing?

Make a test recording from your usual camera position and move the diffused light until your actions and the relevant work area stay visible. A larger, compatible light source can soften shadows, but the best position depends on your work surface and how you move your hands.

What should I consider when setting up and putting the equipment away?

Check the instructions to make sure the light, stand and modifier are compatible, and position the setup so it doesn’t get in the way of your work. Godox warns that the surface of the SL60IIBi can become hot during prolonged use; refer to the manual for safe handling and storage.

What are my rights if a light I bought online develops a fault?

For distance purchases from a business, you generally have a 14-day cooling-off period in the Netherlands, as explained by the Rijksoverheid. You’re also covered by the statutory guarantee: according to ACM ConsuWijzer, the seller must offer an appropriate free remedy if a product breaks sooner than you could reasonably expect under normal use. A manufacturer’s guarantee doesn’t replace this statutory right.

Is CE marking required for softbox lighting?

CE marking is required for electrical products covered by the applicable rules. The NVWA lists lights as examples of electrical appliances; a standalone, non-electrical fabric light modifier isn’t necessarily the same as an electric light. Check the marking and product information for the specific electrical components. A CE logo is not an independent safety certification.