Who is this setup for?

Artists who want to photograph a watercolour evenly

You want to avoid parts of the paper appearing lighter or darker in the photo. Artwork Archive and Saatchi Art both emphasise even lighting when photographing flat artwork.

Artists using a dark background

You want to light the watercolour without unintentionally lighting the background too. Godox describes a grid as a way to control the spread of light.

Artists who want to compare colours

You want white paper and watercolour pigments to look true to life, so you pay attention to both the light source and the white balance. Adobe explains that white balance affects how all colours are reproduced.

What should you look for when choosing?

Choose a setup that lights the whole sheet of watercolour paper evenly, while keeping an eye on where the light falls. Saatchi Art recommends even lighting without directional shadows or reflections, so check both the edges of the paper and the background in a test shot.

One softbox on an existing light

Choose this when: you’re photographing a small study and can use a test shot to check whether the whole sheet is evenly lit.

Trade-off: you’ll need fewer components than with a two-light setup, but a single light source can create noticeable differences in brightness.

Softbox with a suitable grid

Choose this when: light from your setup is falling on the dark background and you want to direct the beam more precisely.

Trade-off: a grid limits the spread of light, but you’ll still need to check that the whole watercolour is evenly lit. Make sure it’s designed for the exact model.

Two diffused light sources

Choose this when: one source doesn’t light the artwork evenly or creates unwanted shadows. Artwork Archive and Saatchi Art describe using two light sources for flat artwork.

Trade-off: this setup requires more space and set-up time, and may need extra equipment. Positioning the lights on either side at around 45 degrees is a useful starting point to assess in a test shot.

Indirect daylight without a softbox

Choose this when: you only photograph occasionally and already have a spot with enough even, indirect daylight.

Trade-off: you won’t need an extra light or light modifier, but you’ll be more dependent on the time of day and lighting conditions.

What to consider What to look for when buying Who should prioritise this?
Even lighting Compare the centre and corners in a test shot; assess the size, diffusion and positioning. I want the whole sheet of watercolour paper, from the centre to the corners, to be lit evenly. Around 29% of consumers prioritise even lighting.
Dark background Compare a test shot with and without a suitable grid, checking both the background and the edges of the paper. Godox describes a grid as a way to limit the spread of light. I want to light my watercolour without brightening the dark background. Around 29% of consumers say controlling the background is their main reason for buying.
Colour reproduction Check the light source and assess a test shot with the white balance set; the softbox does not determine the colour of the light on its own. I want white paper and watercolour pigments to look true to life. Around 24% of consumers prioritise colour accuracy.
Mount and contents Check that the mount matches your light and see whether the package includes items such as a speedring, diffusion panels and a grid. I want a light modifier that fits my existing equipment, and I want to know which other parts I’ll need. Around 18% of consumers prioritise system compatibility.

Points to watch out for when buying

  • Assuming a standalone softbox is a complete lighting kit

    A softbox may be just the light modifier; a suitable light or mount is not necessarily included.

    Check what’s included with the exact product listing and compare the mount with your light.

    Depending on your existing setup, you may also need a suitable light or stand.

  • Assuming every rectangular softbox fits every light

    Models with a Bowens mount and Profoto OCF softboxes have different stated system compatibilities. Some systems also have specific restrictions on how they can be used.

    Check the exact softbox model and light, and follow the manufacturer’s guidance on heat and modelling lights.

  • Using a grid without checking the whole sheet again

    A grid limits the spread of light, but you still need to check that the whole watercolour is lit evenly.

    Compare test shots with and without a suitable grid, checking the background and the edges of the paper separately.

Brands to consider

The model details below can help you compare mounts and included light modifiers; they are not an assessment of the brands’ entire product ranges.

Godox

Godox describes the SB-FW6090 as a 60 × 90 cm rectangular Bowens softbox with a grid.

  • The grid gives you the option to limit the spread of light.
  • The model information refers to a light modifier, not necessarily a complete lighting kit. Check what’s included in the specific listing.

NEEWER

The manufacturer describes the NS93P as a quick-setup 60 × 90 cm rectangular Bowens softbox.

  • According to NEEWER, this model has two diffusion panels and a honeycomb grid.
  • The listed components don’t confirm whether a suitable light and stand are included.

Bresser

Bresser describes the Quick Lock 60x90, article number 14835 and formerly F004880, as a softbox with a Bowens ring.

  • The manufacturer lists an inner and outer diffuser, a grid and a carry bag.
  • Check separately which light and stand you’re using and what’s included in the specific offer.

SmallRig

SmallRig describes the RA-R6090 as a 60 × 90 cm rectangular Bowens softbox with a quick-release setup.

  • According to SmallRig, the model has two diffusion layers and a fabric grid.
  • The manufacturer’s specifications are not an independent assessment of the results when photographing watercolours.

Profoto

The OCF Softbox 2x3' is a 60 × 90 cm rectangular softbox for Profoto’s stated OCF system.

  • A potential option if you already use compatible Profoto equipment.
  • Profoto recommends using it with lights that have a flat front and an LED modelling light, rather than a halogen modelling light.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need two softboxes for a watercolour?

No. First, see whether one diffused light source can light the whole sheet evenly. Artwork Archive describes using two light sources for flat artwork when photographing indoors with a lighting kit; indirect daylight may also be an option.

How should I start positioning the lights?

If you’re using two lights, use the arrangement described by Artwork Archive—one on either side at around 45 degrees—as a starting point. Then check the corners and centre of your own watercolour for any shadows or reflections.

How can I prevent a colour cast on the paper?

Set the white balance to match the light you’re using, then assess a test shot. According to Adobe, white balance affects how all colours are reproduced; a softbox diffuses the light but doesn’t set the white balance.

Does a softbox need a CE mark?

Not necessarily: according to the European Commission, CE marking is only required for products covered by harmonised EU rules. Check which rules apply to the specific product; requirements for an electric light do not, by themselves, prove that a separate, passive fabric softbox also needs a mark.

Can I return a softbox bought online?

In many cases, consumers who buy online from a business have a 14-day cooling-off period, although there are exceptions. The Dutch government advises checking with the seller and reviewing the terms of the specific purchase.