Who is this choice relevant to?

Photographer of shiny beads

Wants to control reflections and highlights without losing the shape of the bracelet. Nikon discusses using a light tent with a generous opening, so there’s enough room to position the camera and lens.

Maker with a small worktable

Needs to fit the camera, bracelet and lighting into a limited space. So compare the footprint of the set-up in use with the space available on your table.

Maker taking product photos regularly

Wants to photograph several bracelets against a similar background and with consistent lighting, and is weighing up the ease of setting up against the freedom to position the light.

What should you consider when choosing?

Separate softbox with a separate light source

Choose this option: if you want to adjust the position and angle of the soft light for each bracelet.

The trade-off: a softbox shapes light; it isn’t a complete lighting kit. Check the fitting and which lamp you’ll need.

Light tent with built-in lighting

Choose this option: if you want to photograph small bracelets in a defined set-up with a practical camera opening.

The trade-off: the enclosure gives you less freedom to position a separate light source around the subject. Also check how much space the tent takes up.

If you’re photographing bead bracelets on a small table, your choice depends on what matters most in your set-up.

What to consider What should you check? Who is this important to?
Reflections and the shape of the beads Check whether you can adjust the diffusion and the direction of the light. Assess the result with the materials you photograph. When I photograph shiny beads and clasps, I want to control the highlights without losing sight of their shape. Around 40% of consumers prioritise controlling reflections.
Space around the table Compare the footprint of the set-up in use with the space on your table, and leave room for the camera opening. With a small worktable, I want to know whether the camera, bracelet and lighting will all fit. Around 30% of consumers say set-up space is their main concern.
Repeating the same set-up Check how the specific light modifier is assembled and which lighting, diffusion fabrics and background are included. When I photograph several bracelets one after another, I want to be able to repeat the set-up easily. Around 20% of consumers put ease of use first.
Consistent colour reproduction Check which light source you’re using, and keep the lighting set-up and camera settings the same between photos. For a series of photos, I want to keep the lighting conditions as consistent as possible, without assuming that a stated lamp specification determines how every bead will look. Around 10% of consumers give colour consistency top priority.

Common purchasing mistakes

  • Assuming a Bowens softbox is a complete lighting kit

    Models such as the Godox SB-FW6060, SmallRig RA-D55 and amaran Light Dome Mini SE are light modifiers designed for use with a suitable light source. The fitting and the separate components determine whether they’ll work with your existing lamp.

    Before buying, check the fitting and exactly what’s included in the version on offer.

    You may also need a separate compatible lamp and mount for this option.

  • Measuring only the bracelet

    The assembled lighting, camera and space for the camera opening also need to fit on or around the table.

    Sketch out the full set-up and compare it with the dimensions of your chosen model when in use.

  • Assuming a light tent is always better for shiny beads

    A light tent disperses light differently from a movable softbox. It may leave you with less room to position a separate light source around your subject.

    Choose based on the direction of light and camera angle you want, not just the promise of soft light.

Brands to consider

Godox

Godox’s range includes the SB-FW6060, a 60 × 60 cm square softbox with a Bowens fitting, according to the manufacturer.

  • You can check the size and fitting against the model information from Godox.
  • The SB-FW6060 is a light modifier; don’t assume a lamp or stand is included.

SmallRig

According to SmallRig, the RA-D55 is a 55 cm softbox with a Bowens fitting, designed for use with a suitable separate light source.

  • SmallRig lists a quick-release design and an included grid.
  • These model specifications aren’t an independent measure of photographic results; check that your light source is compatible.

NEEWER

The LP40 is a tabletop light box with built-in LEDs. It’s an alternative to a separate softbox if you want an enclosed product photography set-up.

  • NEEWER lists 144 LEDs and a light colour of 5600 K for this version.
  • These specifications don’t tell you whether the light box will fit on every table or reproduce the colours of all beads accurately.

amaran

According to amaran, the Light Dome Mini SE is a compact Bowens softbox designed for use with a suitable light source.

  • amaran says that inner and front diffusion are included.
  • Compare the stated dimensions with your work area; the lamp is a separate component.

Joybuy products

Related products coming soon.

Frequently asked questions

Is a separate softbox all I need to take photos?

Not if you don’t already have a suitable light source. Check that the softbox fitting is compatible with your lamp, and see which diffusion fabrics and other components are included in the version you’ve chosen.

How can I reduce distracting reflections on a bead or clasp?

Change the position or direction of the diffused light, then assess the result on the bracelet you’re photographing. A light tent disperses light differently, so make sure its opening works for your camera.

How can I check whether the lighting will fit on my small table?

Compare the dimensions of the assembled softbox or light box with the space available, and allow room for the camera and the opening it needs. A stated product size doesn’t replace checking your complete set-up in person.

Does a softbox or light box need a CE mark?

Not every product needs to carry a CE mark; the requirement depends on the product category. The Dutch government’s information on Business.gov.nl explains the requirements for product categories where CE marking is mandatory. Check which requirements apply to the specific electric light box, and don’t automatically apply the same conclusion to a softbox without electronics.