Makers looking to reduce shadows on their work
You film close-ups of the soldering tip and want to position the light so your hands and tools don’t obscure the joint.
If you already have a suitable continuous video light, choose a softbox that fits its mount and can be positioned alongside your camera and fume extractor. If you don’t yet have a suitable light, consider a complete setup and check the stand, adapter and power supply too. Before filming, test whether your hands block the soldering tip or reflections or banding appear on camera. A softbox does not replace solder fume extraction.
You film close-ups of the soldering tip and want to position the light so your hands and tools don’t obscure the joint.
You need to fit a light, camera, stand and fume extractor into a spare room, and want to work out how much space the setup will take up beforehand.
You want to check that the softbox, continuous light, mount and power supply are compatible, and that your footage looks steady with your camera settings.
Choose this if: you already have a suitable continuous light and mainly want to soften the light on your work.
Bear in mind: the softbox is not a light source, so check the mount and included accessories.
Choose this if: you don’t yet have a suitable video light, or need dimming and adjustable colour temperature.
Bear in mind: the light and stand take up extra space. Lux ratings measured with a standard reflector don’t directly indicate the light output with a softbox.
Choose this if: you want to test whether changing the angle of the light can reduce shadows on the soldering tip.
Bear in mind: light from a window or room won’t necessarily provide the continuous illumination you need for your chosen camera settings.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Clear view of the solder joint | Make a test recording from the intended camera angle and look for shadows from your hands and reflections on metal parts. | I want the soldering tip and my work to remain clearly visible. Around 33% of consumers give visibility of their work top priority. |
| Space around the workbench | Measure the available space beside and above the bench, including room for the stand, camera frame and fume extractor. Keep cables out of your working area. | I want to fit the light, camera and fume extractor without affecting my working posture. Around 27% of consumers prioritise a compact setup. |
| Steady video footage | Film with your own camera, frame rate, shutter speed and preferred dimming level, then check for banding. | I want footage without distracting bands and with consistent exposure. Around 20% of consumers prioritise steady video footage. |
| A compatible complete kit | Check the exact model names, mount and box contents, including the light, adapter, stand and any grid. | I want to know whether the light source and softbox will work together before I order. Around 20% of consumers prioritise a complete, compatible setup. |
A standalone Bowens softbox shapes light, but doesn’t produce it. You can’t use it to film without a suitable continuous light.
Check the mount and everything included in the box before choosing the parts for your setup.
You may also need a compatible light, stand or adapter.
Published figures for some lights are measured with a reflector at a stated distance. Diffusion and positioning change the lighting conditions at your workbench.
Only compare figures measured using the same setup, and test your preferred light modifier in your own workspace.
A light modifier takes up space. The UK Health and Safety Executive recommends using extraction when soldering with rosin-based flux and avoiding the fume plume. This is not an established legal requirement in the Netherlands for every hobbyist.
Plan where your fume extractor will go and how you’ll work before setting up the light. Lighting does not control solder fumes.
The position of the stand and fume extractor may mean you need to rearrange your workspace.
Godox offers both a standalone Bowens softbox and continuous lights, for anyone who wants to choose the light modifier and light source separately.
The RA-D55 is a standalone Bowens softbox for use with a compatible continuous light.
The Light Dome 60 is a round Bowens light modifier for use with a compatible continuous light.
According to Nanlite, the FS-60B is a continuous light that can be used with a compatible standalone softbox via the included Bowens adapter.
The HS60B is a compact continuous light for a tabletop setup, but its mount needs particular attention.
A standalone softbox shapes light; it isn’t a light source. Use it with a suitable continuous light and the right mount, or check whether a kit includes the light, power supply and stand.
Make a test recording with your own camera and the settings you plan to use, including your preferred dimming level. Banding can be caused by the combination of light source, frame rate and shutter speed. Only use a flicker-reduction function if your camera has one.
Keep the light setup outside your immediate working area and use suitable extraction at the source to manage solder fumes. A softbox doesn’t filter fumes; the UK Health and Safety Executive recommends extraction when working with rosin-based flux fumes and advises avoiding the fume plume.
Check which items, such as the light, stand, adapter and grid, are included in the purchase. For eligible online consumer purchases, you generally have a 14-day cooling-off period after delivery, although exceptions may apply. According to ACM ConsuWijzer, the cooling-off period is separate from your rights if a product is faulty. The Dutch government states that there is no fixed statutory warranty period for all products in the Netherlands, and that the seller is your point of contact if there’s a problem with the product.
For electrical and electronic equipment covered by EU rules requiring CE marking, the manufacturer must ensure compliance and affix the mark before the product is sold. Check the marking and product information for the exact light you’re buying. A standalone, non-electrical softbox is not the same product as the light.