Who is this buying guide for?

Makers filming fine solder joints

You want the soldering iron tip, tools and hand movements to remain clear on camera. Check how the light falls and look for reflections in a test clip, rather than relying only on the stated light output.

Filming with limited space to set up

You don’t have much room beside your desk for a softbox and stand. Compare the dimensions when fully set up, and allow space for the light and your preferred camera angle too.

Putting together a lighting system

You want to know whether a separate modifier will fit your existing light or whether you’ll need a light source as well. Check the mount and what’s actually included in the kit you choose.

What should you look for when choosing?

Compact separate softbox

Choose this if: you already have a compatible Bowens light and mainly want to direct light onto a small work area.

Bear in mind: the softbox itself doesn’t produce light. Check you have room for the fully opened modifier, light and stand.

Larger rectangular softbox

Choose this if: you want to light your hands and more of the workbench, and have space to position the modifier out of shot.

Bear in mind: the amaran Light Box 60x90 measures 60 × 90 × 43 cm when fully opened, so it needs more set-up space than the 45x45 version.

Complete kit with continuous light

Choose this if: you don’t yet have a suitable light and want a single kit for your main lighting.

Bear in mind: check what’s included in each kit, the mount and the space needed for the light, stand and cables. A kit could get in the way on a small desk.

What to consider What to check before buying Who should pay particular attention?
Visibility of joints and reflections Record a test clip in your usual working position. Adjust the light angle and check whether a grid helps control spill light in your set-up. If I want to show solder joints and hand movements clearly, I need to be able to assess reflections in the camera frame. Around 29% of consumers prioritise visibility of the joints.
Space for the light and stand Measure the available width and depth, including the light and stand. Compare the dimensions when fully opened, and take the camera angle into account. At a small desk, I want to make sure the light and softbox don’t get in the way of my hands, camera or work area. Around 29% of consumers choose mainly based on the space available for their set-up.
Compatible light and components Check that the mount fits your light and read which components are included in the packaging. If I still need to put together a lighting system, I want to know in advance whether I’ll need to buy a light or stand separately. Around 24% of consumers prioritise a compatible system and the necessary components.
Consistent light on video Record a short test using your chosen light and camera settings. If needed, adjust the shutter speed if your camera offers this setting. If I want to avoid banding in my video, I need to test the light and camera together first. Around 18% of consumers prioritise this recording issue.

Pitfalls to avoid

  • Assuming a separate softbox is a complete lighting kit

    The specifications for a separate modifier don’t necessarily mean that a light source is included.

    Check the contents list and make sure the mount fits the light you own or plan to buy.

    You may also need a compatible continuous light and a stand.

  • Comparing only the folded dimensions

    The dimensions when fully opened determine how much space the softbox takes up while you’re filming. The amaran Light Box 45x45 measures 45 × 45 × 34,5 cm when fully opened; the Light Box 60x90 measures 60 × 90 × 43 cm.

    Draw your light, softbox, camera, hands and work area to scale before choosing a size.

    A set-up that’s too large may not fit in your available space or may need a different stand.

  • Assuming diffused light automatically means flicker-free video

    A diffuser doesn’t guarantee that the combination of LED light and camera will be free of banding.

    Record a short video with the light and camera you plan to use before filming the full demonstration.

  • Expecting your lighting set-up to deal with soldering fumes

    A softbox changes the lighting, but it won’t control fumes produced while soldering.

    Treat lighting and fume control as separate parts of your workspace set-up.

    You’ll need a separate solution for fume control.

Brands to consider

amaran

The Light Box 45x45 is a compact square Bowens softbox. The Light Box 60x90 offers a larger rectangular surface if you have the room for it.

  • According to amaran, both models include a diffuser, inner diffusion and a grid. Their dimensions when fully opened are 45 × 45 × 34,5 cm and 60 × 90 × 43 cm respectively.
  • These are separate modifiers, not complete lighting kits. The result in a soldering set-up depends on the positioning, so test it on camera.

SmallRig

The RA-D55 is a round Bowens softbox for anyone who already has a compatible video light.

  • SmallRig specifies a 55 cm opening, two diffusion layers and a grid.
  • Check separately that you have a light and suitable stand. Quick set-up is a manufacturer claim.

Godox

The SB-FW6060 is a square Bowens softbox with a grid. The range also includes larger rectangular versions.

  • Godox lists the SB-FW6060 as measuring 60 × 60 cm and featuring a Bowens ring.
  • Check the specific listing to see whether it includes only the modifier and whether it fits your light.

NEEWER

The NS55P is a 55 cm round Bowens modifier designed for use with an existing continuous light.

  • NEEWER lists two diffusers and a grid for the 55cm version.
  • The product range includes several sizes, so check that the listing is for the 55 cm NS55P.

Joybuy products

Related products coming soon.

Frequently asked questions

Will any softbox fit my existing light?

No. The separate modifiers mentioned here have a Bowens mount. Check the mount on your exact light model and what’s included in the packaging before ordering.

How can I position the light without it getting in the way of filming?

Check the camera frame to make sure the soldering iron tip, hands and tools are visible. Move the light if reflections are distracting. Adjust the grid if needed, and fit the softbox according to the manufacturer’s instructions, keeping it clear of your working area.

What can I do if I see stripes in my video?

Start by recording a test clip with the light and camera you plan to use. Sony explains that flickering light can cause banding, and that adjusting the shutter speed may help if your camera offers this setting. The result depends on the combination of equipment.

Will a softbox remove soldering fumes?

No. A softbox controls the lighting and doesn’t remove soldering fumes. The UK Health and Safety Executive (HSE) recommends fume extraction when soldering with rosin-based flux, and keeping your head out of the fume plume. For employees in the Netherlands, employers must assess exposure to hazardous substances; this workplace obligation doesn’t automatically apply to someone filming as a hobby.

What cooling-off period applies to an online purchase?

According to the Dutch Government, in many cases you have 14 days to change your mind when buying online from a business, with some exceptions. Before buying, also check which components are included in the kit and the seller’s terms and conditions.