What should you look for when choosing?
First decide whether even reproduction or visible texture is your priority. Then consider how much control you need over the light on the dark background, and what equipment you already have.
| What to consider |
What should you look for? |
Who is this important for? |
| Light on the print and background |
Check both the edges of the print and the background in a test shot. See whether a grid is included and whether you can reposition the light source. |
If the print needs to be clearly visible while the dark background stays dark, controlling the background should be your priority. Around 36% of consumers rank this as their top consideration. |
| Even lighting and colour |
Check the corners of the print too. Set the white balance to suit the light you’re using and compare the shot with the original. |
If you want to capture the whole print as faithfully as possible, look for even lighting and accurate colour. Around 29% of consumers prioritise these reproduction qualities. |
| Fitting and package contents |
Check that the softbox fitting matches your lamp, and confirm whether a lamp and stand are actually included. |
If you want to avoid buying a light modifier that won’t fit your equipment, check the fitting and contents of the exact set. Around 21% of consumers prioritise a compatible, complete setup. |
| Texture and setup |
Compare test shots taken with even and oblique lighting. If you’ll be setting up and packing away the softbox often, check the mounting mechanism on the model you’re considering. |
If you want to show the texture of the paper or ink, or regularly move your setup, take the lighting angle and ease of assembly into account. Around 14% of consumers prioritise these needs. |
Products on Joybuy
Related products coming soon.
Frequently asked questions
Do I need two softboxes for every linocut print?
No. According to the Canadian Conservation Institute, two light sources on either side at around 45° are a starting point for even reproduction. If you want to emphasise texture or create a more atmospheric image, compare this with a shot taken using a single light source at a more oblique angle.
How can I prevent an unwanted colour cast on the paper?
Set the white balance to match the light falling on the print, then compare a test shot with the original. Canon Europe explains that challenging lighting conditions may require a suitable white balance setting; a softbox alone won’t guarantee accurate colour reproduction.
What should I check when setting up a softbox?
Check that the mount fits your lamp and find out which parts are included with the model. Attach the diffusion cloths and any grid according to the model’s instructions. For electric lamps, also follow the manufacturer’s safety information.
What additional equipment and cooling-off period should I consider when buying online?
A standalone softbox may need a compatible lamp and stand; these aren’t included with the NEEWER SB-BW6090. According to ACM ConsuWijzer, for a standard online consumer purchase you generally have a statutory cooling-off period of up to 14 days after the product has been delivered, although exceptions apply.
Does a studio light in the Netherlands need a CE marking?
That depends on which EU rules apply to the electrical equipment. EUR-Lex states that the Low Voltage Directive applies to equipment with a rated voltage of 50–1,000 V AC or 75–1,500 V DC. For equipment covered by the applicable rules, the manufacturer must assess conformity and affix the required marking. Don’t assume the same directive applies to a passive softbox or equipment outside those voltage limits; a CE marking is not, in itself, an independent product test.