For a collage board on a small table, one adjustable continuous light is a space-saving option, but take a test shot to check that the whole board is evenly lit. Two lights that can be positioned independently give you more control over each side, but take up more space. If you have enough soft natural light from a window, try using a white reflector first. When choosing a kit, always check that the lights, compatible softboxes, stands and suitable power supplies are actually included.
Which setup is right for you?
Maker dealing with unevenly lit work
You want to capture the whole collage board without one side appearing much brighter than the other. Consider whether a reflector will lift the shadows enough, or whether you have room to light both sides. Printbeat recommends using two light sources, one on either side of the work, for reproductions.
Maker looking to capture colour accurately
You want to photograph paper colours and other materials as accurately as possible. Consider more than just the light: mixed lighting, the shooting angle and using a colour reference all matter. DT Heritage also discusses positioning artwork flat and lighting it evenly when digitising it.
Maker with limited setup space
You’re photographing on a small table and need to make room for the light modifier and stand, too. A compact modifier can be practical, but it doesn’t automatically make a complete lighting kit; SmallRig, for example, describes the RA-D30 as a light modifier for specific COB lights.
What should you look for when choosing?
Start by taking a test shot of the whole board, then check the edges, dark areas and shiny materials. Next, decide how many light sources you need and how much setup space you have.
Window light with a reflector
Choose this if: you have enough soft window light during the day and mainly want to brighten one darker side.
Consider: the direction and strength of the light are harder to reproduce. Take a test shot to check that both edges of the board are well lit.
One adjustable continuous light
Choose this if: you have limited space or want to add a compatible softbox to a light you already own.
Consider: a standalone light and softbox don’t automatically make a complete setup, and one light source gives you less independent control over each side.
Two independently adjustable softbox lights
Choose this if: you want to photograph the board regularly in similar conditions and adjust each side separately.
Consider: two lights and stands need space beside your small table. You’ll still need to check for reflections and colour issues in a test shot.
| What to consider |
What to look for when buying |
Who should prioritise this? |
| Even lighting |
Check whether you can position and aim one or two light sources; compare the edges of the board in a test shot. |
If you want to avoid one side of the collage board looking noticeably brighter, it’s important to control how the light falls. Around 33% of consumers say even lighting across the board is their main priority. |
| Colour and reflections |
Check the stated colour temperature and test how the diffusion and angle of the light affect any shiny elements in the frame. |
If you want to capture paper colours and shiny details accurately, assess a shot of the work alongside a colour reference. Around 27% of consumers prioritise colour and reflections. |
| Space and kit contents |
Measure the space beside the table; check the connections and power supply, and whether the light and stand are included. |
If you have limited room around the table, the complete setup needs to fit and be compatible with your equipment. Around 20% of consumers say limited setup space is their main consideration. |
| Repeatable lighting |
Check whether the brightness is adjustable and whether you can record the positions of the lights and stands. |
If you want to photograph the board in similar conditions in future sessions, it helps to be able to repeat your settings and positions. Around 20% of consumers prioritise repeatable shots. |
Things to watch out for when buying
-
Mistaking a standalone softbox for a complete lighting kit
A softbox is a light modifier, while the Godox SL60IIBi and amaran COB 60x S are standalone lights. Check that the fitting is compatible with your light and find out what other parts you’ll need.
Before ordering, compare the contents of the exact model variant with the equipment you already own.
You may also need a compatible light and a stand to complete the setup.
-
Assuming regional versions of the NEEWER NK200 are identical
NEEWER lists different fittings for regional versions. The description and number of components may also vary between versions on sale.
Check the fitting, power supply, plug and full kit contents for the specific version you’ll receive.
-
Expecting two soft lights to solve glare and colour issues automatically
Shiny materials, mixed lighting and the shooting angle all affect the result, even when you use two light sources.
Assess a test shot that includes the lightest, darkest and shiniest parts of the collage.
Relevant brands to consider
Westcott
The U60-B Bi-Color LED 2-Light Softbox Kit is a two-light kit for anyone looking for lights, modifiers and stands in one setup.
- The kit lists two lights, two 22-inch octaboxes, adapters and stands.
- Check that there’s room for two stands beside your small table and that the included power supply suits your needs.
NEEWER
The NK200 is a two-light option with 60 × 60 cm softboxes, worth considering if you want to light both sides.
- NEEWER lists E27 fittings for the European version.
- Regional versions may differ in their fittings and kit contents. Check the exact version, power supply and included lights before buying.
Godox
The SL60IIBi is a standalone continuous light for building your own setup.
- Godox lists dimming, a Bowens mount and a colour temperature range of 2800–6500 K.
- A compatible softbox and stand aren’t automatically included; check the contents of the combination you choose.
amaran
The COB 60x S is a standalone bi-colour light for anyone who wants to choose a compatible softbox.
- amaran lists a Bowens mount and a colour temperature range of 2700–6500 K.
- The listed product contents don’t make up a complete softbox-and-stand setup; check what else you need.
SmallRig
The RA-D30 is a compact, standalone light modifier for the RC 60/100 COB lights specified by SmallRig.
- SmallRig lists a 29 cm opening and an included grid.
- The RA-D30 doesn’t produce light itself. Its compact size doesn’t guarantee that one will light the whole board evenly.
Joybuy products
Related products coming soon.
Frequently asked questions
How can I stop one side of the collage looking brighter?
Start by taking a test shot of the whole board. If one window isn’t providing even lighting, try using a reflector or positioning two light sources at a similar distance on either side. Then check the edges and any shiny areas again.
Is a high CRI rating enough for accurate colour reproduction?
No. A stated CRI rating doesn’t measure the result in your final photo. Mixed lighting, reflections and the shooting angle also have an effect, so assess a test shot of the work alongside a colour reference.
How do I set up a standalone softbox safely?
First check the fitting, the light required and the stand for the exact model; the SmallRig RA-D30, for example, is a light modifier without its own light source. Follow the manufacturer’s safety and operating instructions for electrical components, and keep cables out of walkways.
What costs and rights should I consider after buying?
A standalone light modifier may also require a compatible light and stand. For many online consumer purchases in the Netherlands, you generally have a cooling-off period of up to 14 days after delivery, subject to statutory exceptions. If a product is faulty, the seller is responsible for providing a remedy under the legal guarantee; a manufacturer’s guarantee doesn’t replace this right. ACM ConsuWijzer explains these cooling-off and guarantee rights.
Does an electric studio light need a CE mark in the Netherlands?
The Netherlands Food and Consumer Product Safety Authority states that CE marking is compulsory for electrical consumer products. Check the mark and the product information on safe use for the specific light. This applies to electrical equipment, not to a passive reflector.