Start by looking at the space beside and above the table, then decide whether you want to control reflections on metal and lens glass separately. A standalone softbox gives you more freedom to position the light, but you’ll need a compatible lamp and often a stand. A complete kit includes several components, while a light tent is only suitable if the camera and your preferred shooting angle fit inside. Even with the right softbox, the position of the light and any reflector cards will affect the shape and reflections you see.
Who is this lighting suitable for?
Photographers capturing shiny camera details
If you want to capture lettering and shape, you may want to adjust the light and reflections on metal components and lens glass. Zoom.nl and broncolor describe the flexibility to reposition lights and use reflectors for product photography.
Photographers with limited setup space
With a small table, you’ll need to allow for the modifier when it’s set up, the camera angle, and space for the lamp or stand. So measure not only the table, but also the space beside and above it.
Creators taking consistent product photos
If you want to photograph several cameras against a similar background, a setup you can recreate in the same way each time may be useful. A light tent is only suitable if the camera and your preferred shooting angle fit inside.
What should you look for when choosing?
Standalone softbox with a separate light source
A good fit if: you already have a compatible lamp, or want to choose the lamp, mount and stand yourself.
Bear in mind: a standalone modifier isn’t a complete lighting kit; check the mount and whether you’ll need a separate ring.
Complete kit with softboxes
A good fit if: you still need lamps and stands and want to get all the components together at once.
Bear in mind: two stands may take up more floor space around a small table.
Foldable light tent with built-in lighting
A good fit if: you’re taking repeatable photos of cameras that fit inside the tent, including at your preferred shooting angle.
Bear in mind: compared with an open-table setup, the walls and openings limit how freely you can position the camera and light.
| What to consider |
What to check before buying |
Who is this important for? |
| Reflections and shape |
Check whether you can reposition the softbox and whether a diffuser or grid is included; a reflector card may also help. |
I want to keep the metal, lens glass and lettering visible without flattening the contours. Around 33% of consumers prioritise controlling reflections. |
| Space around the table |
Measure the available space beside and above the table, then compare it with the setup in use. If you’re choosing a light tent, check its shooting openings too. |
If space is limited, I want to know whether the lamp, camera and modifier can fit alongside one another and still be moved around. Around 27% of consumers give available space top priority. |
| Complete kit or separate components |
Check the contents, mount and whether a lamp, stand or speedring is included for the exact version you’re considering. |
I want to avoid missing components or an incompatible mount before setting everything up. Around 20% of consumers prioritise a kit that’s ready to use or compatible. |
| Consistent colour |
Compare the stated colour temperature and colour rendering for the exact lamp version. Otherwise, switch off ambient lighting with a different colour and keep your settings consistent throughout the series. |
When taking a series of photos, I want the paintwork and upholstery to look consistent. Around 20% of consumers make consistent colour their top priority. |
Common buying mistakes
-
Assuming a standalone softbox is a complete lighting kit
What’s included varies by version: a standalone modifier may need a compatible lamp, mount or support. The speedring for the 35 × 60 cm broncolor softbox is sold separately.
Before buying, compare the contents and mount of the exact model with your lamp and stand.
-
Confusing the softbox dimensions with the space needed for your setup
As well as space for the camera and modifier, you’ll need room for the lamp and to reposition the light or reflector cards.
Measure the available space beside and above the table, then map out the positions of the camera, light and subject.
-
Assuming a small light tent will work for every shooting angle
A tent has limited dimensions and fixed shooting openings, unlike an open-table setup with a repositionable lamp.
Compare the dimensions of your largest camera and your preferred angle with the tent size and available openings.
Brands to consider
Godox
Godox lists the SB-FW6060 as a 60 × 60 cm rectangular softbox with a Bowens mount.
- The manufacturer lists a grid as included with this model.
- Check that the mount is compatible with the exact lamp you plan to use.
amaran
According to amaran, the Light Dome Mini SE is a foldable octagonal softbox with a Bowens mount.
- The manufacturer lists an inner and outer diffuser, and dimensions of 58,0 × 34,0 × 21,5 cm when assembled.
- You’ll need a compatible lamp separately; the stated dimensions are relevant when considering the space on and around your table.
Bresser
According to the manufacturer, the Bresser BR-225B is a kit with two 50 × 70 cm softboxes, two 50 W LED lamps and two stands.
- The manufacturer specifies 5500 K and CRI >85 for the kit.
- Two stands may take up more space around a small table; the stated figures don’t measure the colour rendering in your photos.
PULUZ
According to the manufacturer, the PULUZ PU5041B is a 40 cm foldable light tent with built-in USB lighting.
- The manufacturer lists adjustable lighting, a diffusion cloth, and openings at the front and top.
- Check that your camera and preferred shooting angle fit inside the tent.
broncolor
broncolor lists a 35 × 60 cm rectangular softbox for product lighting.
- The manufacturer describes the lighting as even.
- According to broncolor, its small size doesn’t automatically produce soft light; the speedring is sold separately.
Joybuy products
Related products coming soon.
Frequently asked questions
Should I use two softboxes straight away for a vintage camera?
No. Start with one movable light source and assess the reflections on the lens and body. Only add another light source or a reflector card if a component isn’t visible enough.
Will any standalone softbox fit my lamp?
No, the mount must be compatible with the exact lamp and softbox. Godox lists a Bowens mount for the SB-FW6060; for the 35 × 60 cm broncolor softbox, you’ll need to choose a compatible speedring separately.
How can I keep colours consistent across several photos?
Keep your lighting settings the same and switch off room lights with a different colour. Zoom.nl notes that mixing daylight and artificial light makes it harder to reproduce colours accurately.
What if the lighting is faulty after I buy it?
If a product is faulty, the seller is your point of contact for a solution when you make a consumer purchase in the Netherlands. According to the Dutch Government, there is no fixed statutory warranty period that applies to all products in the Netherlands.
Is CE marking compulsory for every softbox?
No. According to the European Commission, CE marking is only required for product categories covered by applicable harmonised EU rules. A non-electrical modifier and an electric lamp aren’t necessarily subject to the same rules. EUR-Lex states that the Low Voltage Directive applies to electrical equipment with a rated voltage of 50 to 1.000 V AC or 75 to 1.500 V DC. Check which requirements apply to the exact electrical version; CE marking is not an independent quality assessment.