Who is this lighting for?

Pastel artists who film their work

If you want to capture the subtle colours on your paper clearly, you can match the light to your camera’s white balance. Canon Europe describes white balance as a setting that controls colour rendering in changing lighting conditions.

Creators in shared workspaces

If you have limited space for a tripod or want to stop light spilling into other work areas, consider a desk mount or a suitable grid. Elgato describes a desk clamp for the Key Light Air MK.2; Godox explains that a grid can help control light spill.

Beginners without a studio light

If you don’t already have a suitable light, check whether the offer also includes the light source and a stand. NEEWER lists these in the SF40 kit, but the 660 panel softbox is supplied without a light.

What should you consider when choosing?

Complete softbox kit

Suitable if: You don’t already have a suitable light or tripod and want to choose everything in one kit.

Bear in mind: NEEWER states that the SF40 has a fixed colour temperature of 5700 K.

Separate Bowens softbox and light

Suitable if: You already have a compatible Bowens light or want to choose the light and modifier separately.

Bear in mind: Check the fitting and which accessories are included. The stated reflector figures don’t tell you how much light will reach your drawing area with the softbox attached.

Diffused panel with desk clamp

Suitable if: A floor stand would be inconvenient and you can position the panel above your work surface using the clamp.

Bear in mind: The Elgato Key Light Air MK.2 is a panel, not a separate softbox. Check your desk edge, positioning and power supply.

Separate softbox for a NEEWER 660 panel

Suitable if: You already have a compatible 660 panel and want to soften its light output.

Bear in mind: NEEWER states that the light is not included and that any flaps must be removed before fitting.

Consideration What should you check? Who is this important for?
Colour in video Check the colour temperature controls and stated colour rendering of the exact light variant. Record a test clip using a fixed white balance. I want the pastel shades on paper to remain recognisable when I film, so colour rendering is my main selection criterion. Around 31% of consumers give recognisable colour rendering top priority.
Space and light spill Measure your work surface and check whether a stand or desk clamp will fit. See whether a grid is included with your chosen softbox. If I share my workspace, I want to position the light without unnecessarily blocking walkways or directing light into other areas. Around 25% of consumers prioritise limited space or light spill.
Complete setup Read the list of items in the box and check the fitting, power supply and whether a stand is included. I don’t want to have to work out separately which light, softbox and stand will fit together. Around 25% of consumers give top priority to a complete kit with compatible fittings.
Stable video footage Record a test clip using your preferred dimming level and with your other lights switched on. Check the footage for banding. I don’t want banding or visibly changing exposure in my footage, so I want to test the combination of light, dimming level and camera. Around 19% of consumers prioritise stable video footage.

Common buying mistakes

  • Mistaking a separate softbox for a complete kit

    A softbox may be sold without a light or stand. For example, NEEWER states that the 660 panel softbox doesn’t include a light, while the SF40 kit includes a light and tripod according to the manufacturer.

    Before buying, compare the listed contents with the softbox fitting on your light.

    A separate light or compatible stand may be needed with a standalone modifier.

  • Mistaking reflector figures for the light reaching the paper with a softbox

    Figures given for use with a reflector don’t automatically describe the illuminance on your drawing area when using a softbox.

    Only compare figures measured on the same basis, and test how the light covers your entire work surface.

  • Assuming a panel and a softbox use the same mount

    A desk mount and a Bowens fitting require different setups; a panel isn’t automatically a separate softbox.

    First decide where you can position the light, then check the mount and the accessories included.

    You may need a different stand or a suitable desk edge to position the light where you want it.

Brands to consider

Godox

Offers separate continuous lights and Bowens modifiers for anyone who wants to combine components.

  • Godox specifies an adjustable colour temperature for the SL60IIBi; the SB-FW6060 is a separate softbox with a grid.
  • The light and softbox aren’t automatically packaged together. The SL60IID is also not the same bi-colour variant as the SL60IIBi.

amaran

The 100x S is a separate bi-colour Bowens light for anyone choosing their light source and softbox separately.

  • amaran specifies a colour temperature of 2700–6500 K and CRI 95+ for the 100x S.
  • The listed box contents don’t include a softbox; these specifications alone don’t determine how your camera will capture pastel colours.

NEEWER

Offers both a complete SF40 kit and a separate softbox for certain 660 LED panels. These products are designed for different setups.

  • According to NEEWER, the SF40 includes a softbox, a 35 W LED light and a tripod.
  • The SF40 has a fixed colour temperature of 5700 K. The 660 panel softbox is supplied without a light and has specific fitting requirements.

Elgato

The Key Light Air MK.2 is a diffused panel for a desk setup, not a separate softbox.

  • Elgato lists a desk clamp and adjustable colour temperature.
  • Check that the clamp and preferred position will work with your drawing desk. According to Elgato, maximum brightness depends on the available power.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a softbox on its own enough to film your drawing?

Not if by softbox you mean just the light modifier. Check whether the offer also includes a suitable continuous light and stand: the NEEWER 660 panel softbox doesn’t include a light, while the SF40 kit includes a light and tripod according to NEEWER.

How can you stop pastel colours looking different on video?

Match the light to the other lighting in the room and set your camera’s white balance to suit the light falling on the paper. Check the result with a test clip; a stated CRI alone doesn’t assess the full combination of light, paper and camera.

What can you do if your video shows banding?

Test the intended light and dimming level with your own camera. Sony explains that flickering light can cause banding; on supported camera models, a variable shutter speed setting may help.

What should you consider when mounting a light in a shared workspace?

Check that a stand or desk clamp will fit where you plan to put it and can cover your entire drawing area. For the NEEWER 660 panel softbox, the manufacturer says to remove any flaps before fitting it.

Is a CE logo enough to consider a light compliant?

No. According to the European Commission, CE marking is only required for products covered by EU rules that stipulate it. A logo on its own doesn’t confirm the origin or compliance of the item being offered; check the product information and applicable EU conformity details.