Artists looking to reduce hand shadows in shot
You film your work from above and want to keep your lines visible as your hand moves. B&H eXplora discusses positioning multiple light sources at an angle to illuminate artwork evenly.
For drawing lessons filmed from above, a continuous light with a compatible softbox could be a good fit if you have room for a stand and want to choose your light modifier. A diffused panel with a desk clamp may work better if floor space is limited. Test it with paper and moving hands to see whether the light position creates shadows or reflections: a light and softbox do not automatically come as one package. Before buying, check what’s included, the power supply and the CE marking for the exact electrical light.
You film your work from above and want to keep your lines visible as your hand moves. B&H eXplora discusses positioning multiple light sources at an angle to illuminate artwork evenly.
You want to show colour differences in materials and adjust the colour temperature of the light. Godox and Aputure publish specifications for individual models, but a test recording with your own paper and colours is still useful.
You have little room for stands, so you’re comparing a separate softbox setup with a diffused panel and desk clamp. Elgato describes the Key Light MK.2 as a panel supplied with a desk mount.
Start by recording a test of the whole drawing area and your moving hand. Then decide which light shape, mounting option and extra parts will suit your workspace.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Visibility of paper and hands | Watch a test recording of the whole sheet as your hand moves. Look out for glare spots and check the position of the light. | I want to see the lines clearly as my hand moves across the paper; around 29% of consumers put visibility of the drawing area first. |
| Colour and adjustability | Compare the colour temperature settings and any colour-rendering information for the exact model. Test it with your own paper and materials. | When I demonstrate colours, I want to see how they look on camera under the chosen light; around 23% of consumers put colour rendering first. |
| Space and mounting | Measure the clear edge of your table and the space around the drawing area. Elgato states that the Key Light MK.2 clamp fits surfaces up to 60 mm thick; also check that the light can reach the sheet from where it’s mounted. | I don’t want to fill my workspace with a stand and softbox; around 18% of consumers give the most weight to limited setup space. |
| Complete setup | Check what’s in the box, whether the mount is compatible, what power supply is included and whether you’ll need to buy a suitable stand or softbox separately. | I want to know in advance which parts I need to aim the light at my drawing area; around 18% of consumers put having a complete setup first. |
| Noise while explaining | Test the light and microphone together in the position you’ll use during recording. | When I explain as I draw, I want to take fan noise in my recording into account; around 12% of consumers put clear lesson audio first. |
Godox lists the SL60IIBi light and SB-FW6090 softbox as separate products. So a compatible mount doesn’t automatically mean they come in the same box.
Check the contents of the exact listing, the mount type and whether a suitable stand and power supply are included.
A light’s measured output can depend on factors such as distance, colour temperature and whether a reflector is being used. It doesn’t necessarily tell you how the drawing paper will be lit with a softbox.
Only compare figures measured under the same conditions, and make a test recording from the distance you’ll be filming at.
SmallRig states that on the RC 120 series tested, both fan power and light output are reduced in silent mode.
Test the sound and lighting together in the mode you plan to use for recording your drawing lesson.
The Elgato Key Light MK.2 is a panel with its own mount, not a separate Bowens softbox. Aputure states that the Light Dome SE tested is no longer in production.
Check the mount type and what’s included in the specific listing before comparing parts with different setups.
Offers both continuous lights with Bowens mounts and separate Bowens softboxes, which is useful if you want to combine the parts yourself.
The amaran 100x S is an adjustable continuous light; Aputure also documents light modifiers with Bowens mounts.
The European version of the RC 120 series can serve as the light source for a separate Bowens light modifier.
The Key Light MK.2 is a diffused LED panel with a desk clamp: a compact alternative to consider alongside a softbox setup.
Not necessarily. Start with a test setup and check the whole sheet as your hand moves. B&H eXplora describes using two light sources at an angle to illuminate artwork evenly, but that doesn’t mean every drawing video needs two lights.
No. Check that the light modifier’s mount fits the light and that the mount and stand can support the combination. For example, Godox specifies a Bowens mount for the SL60IIBi and the separate SB-FW6090 softbox.
Follow the manual for the exact model. For the SL60IIBi, Godox warns against looking directly at the light source, touching hot parts and cleaning the light before unplugging it.
If a product is faulty, the seller is responsible for the statutory guarantee, according to ACM ConsuWijzer. For a standard online purchase from a professional trader, you generally also have a 14-day cancellation period from the date of delivery; Your Europe explains the exceptions to this right. Check the applicable terms and any return costs in advance.
Electrical products must meet the applicable European requirements and carry the required CE marking, as explained by the Netherlands Food and Consumer Product Safety Authority. A CE marking doesn’t mean that every individual item on offer has been inspected; a passive softbox is also not the same as an electric light.