Choose your lighting to suit your work surface: position a soft, adjustable light source so your hands don’t constantly block the stitches, and check the result with a test recording. A complete kit can be handy if you don’t already have lights or stands. If you buy a separate lamp and light modifier, you’ll need to check the mount and any other parts you need. For video, also consider the yarn colour, possible flicker and the space around your desk.
Who is this lighting for?
Knitting tutor filming from above
If you mainly film your hands and stitches from above the table, consider the direction of the light: your hands can block the work surface, and the texture of the stitches needs to remain visible. PetaPixel describes a softbox as a light modifier that produces soft light.
Maker filming at different times of day
If you film while the light from the window changes, you’ll want to check and adjust the yarn colour and exposure for each recording. Canon Europe explains that the colour temperature of light affects how a camera captures colour.
Beginner with a small home desk
If you don’t already have a complete lighting set-up, compare a kit with lights and stands against buying separate components. Also check that your chosen set-up fits around your desk and that the light modifier can be attached to the lamp.
What should you look for?
Complete kit with two panels
Best if: you don’t already have lights or stands and want to illuminate your work surface from two directions. The manufacturer lists two panels, softboxes, stands and mains adapters for the NEEWER 660 kit.
Bear in mind: two stands take up space around your desk, and the stated lux value doesn’t measure the light on your knitting. According to the manufacturer, NP-F batteries are not included.
Separate COB lamp with Bowens light modifier
Best if: you want one adjustable main light source or already have compatible components. Godox lists a Bowens mount and adjustable colour temperature for the SL60IIBi, while amaran lists the same for the COB 60x S.
Bear in mind: the lamps reviewed are not complete softbox kits. Check the light modifier, mount, stand and power supply for the exact model.
Try the natural light you already have first
Best if: you film in good daylight and want to see whether a different desk position gives you a clear view of your knitting. Canon Europe explains that cloud cover can diffuse sunlight and soften shadows.
Bear in mind: daylight changes with the time of day and the weather, so exposure won’t automatically stay consistent between recordings.
Then decide by making a test recording of your knitting. This lets you check that the stitches remain visible, the yarn colour matches the real thing and the set-up fits around your desk.
| What to consider |
What should you check? |
Who should consider this? |
| Shadows and visibility of stitches |
Make a test recording while knitting and see whether you can angle the light towards the work surface. |
If you film from above, you’ll want to make sure your hands don’t constantly block the stitches. Around 33% of consumers prioritise visible stitches and hand movements. |
| Yarn colour and video quality |
Film with the actual yarn and the recording settings you use; check the white balance and review the video for banding. |
If you want colours to look consistent between lessons, check the yarn through your camera in the available light. Around 27% of consumers prioritise consistent yarn colour and stable video quality. |
| Space around your desk |
Measure the available floor and desk space, allowing for the lamp, light modifier and stand. |
If you have limited space at home, check that the set-up fits out of shot without getting in the way of your knitting. Around 20% of consumers prioritise a compact set-up. |
| Complete kit and components |
Read the contents list. If buying separate components, check the mount, stand, power supply and whether any batteries are sold separately. |
If you don’t already have suitable lighting, you’ll want to avoid missing essential components. Around 20% of consumers prioritise a complete kit with compatible components. |
Common buying mistakes
-
Mistaking a separate softbox for a complete video light
A light modifier isn’t the same as a lamp. The COB lamps reviewed and the complete panel kit have different contents lists.
Compare the contents list before ordering and check that the light modifier fits the lamp.
With separate components, you may need to buy a compatible light modifier, stand and power supply separately.
-
Assuming the lux rating with a reflector applies to a softbox
The stated light output for the lamps reviewed is based on specific testing conditions; it doesn’t automatically describe the lighting on your work surface when using a softbox.
Only compare figures measured on the same basis, and make a test recording of your knitting.
-
Relying on colour temperature alone
The camera captures colour partly according to the available light and the white balance setting. An adjustable Kelvin value alone doesn’t guarantee that the yarn colour will look right in your video.
Check the actual yarn through the camera, using the light you’ll use to record your lesson.
Brands to consider
NEEWER
The 660 kit reviewed is an option if you’re looking for two softened LED panels with stands in one package.
- NEEWER lists two softboxes, panels, stands and mains adapters for this version; the colour temperature is adjustable from 3200–5600 K.
- NP-F batteries are not included. The manufacturer’s rating of 3300 lux at 1 m doesn’t automatically tell you how much light will reach your knitting.
Godox
The SL60IIBi is a separate, adjustable COB lamp for building your own set-up with a compatible Bowens light modifier.
- For this model, Godox lists an adjustable range of 2800–6500 K, dimming and a Bowens mount.
- Check separately whether the version you choose includes a softbox and stand. Light output figures with a standard reflector are not measurements taken with a softbox.
amaran
The COB 60x S reviewed is a compact Bowens lamp for a set-up using components you choose separately.
- For this model, amaran lists an adjustable colour temperature of 2700–6500 K and names the Light Box 45x45 as a compatible light modifier.
- The lamp’s listed contents don’t include a softbox or lighting stand. This information applies to the version reviewed, not every product from the brand.
Joybuy products
Related products coming soon.
Frequently asked questions
Do you need one or two light sources for a knitting tutorial?
Start with a test recording using one adjustable, softened light source and check whether your hands block any important stitches. If they do, you can see whether a second light position would help. The two panels in the NEEWER kit reviewed don’t mean that everyone needs two lights.
How can you stop the yarn colour looking different on video?
Review a test recording with the actual yarn and adjust the white balance to suit the light where you’re working. Canon Europe explains that the colour temperature of light affects how a camera captures colour, so an adjustable lamp alone doesn’t guarantee an exact match.
What can you do if the lamp appears to flicker on video?
First, check a short recording for visible banding. Sony Support recommends adjusting the shutter speed to address flicker and notes that anti-flicker features vary by camera model; check your camera’s manual too.
Is the manufacturer’s warranty your only right if a product is faulty?
No. ACM ConsuWijzer explains that, in addition to any seller’s warranty, you also have a legal guarantee if the product doesn’t meet what you could reasonably expect when used normally; the seller is responsible for this. According to ACM, online purchases generally also come with a 14-day cooling-off period after delivery, although exceptions apply.
What safety rules apply to an electric video light?
The Netherlands Food and Consumer Product Safety Authority states that the Low Voltage Directive applies to electrical equipment with a rated AC voltage of 50–1000 V or a rated DC voltage of 75–1500 V; other rules may apply outside this range. According to the European Commission, CE marking is only required when applicable harmonised EU rules say it is. So check the power supply and documentation for the exact lamp or adapter. A non-electrical softbox isn’t automatically covered by the same rules.