Who is this guide for?

Artist photographing prints behind glass

You want to capture the whole print and can move the lights to check whether their reflections are visible.

Artist creating a consistent series of print photographs

You photograph several flat works and want to be able to repeat the position of each light source.

Artist with a small photography space

You are weighing up the space needed for lights and stands against the convenience of a separate light modifier for equipment you already own.

What should you consider when choosing?

One light with a softbox

Suitable when: you occasionally photograph a smaller framed print and can check the lighting in a test shot.

Trade-off: there is less equipment to set up, but one light source will not necessarily illuminate both sides evenly.

Two lights with softboxes

Suitable when: you photograph prints more often and want to adjust the light from both sides. The Canadian Conservation Institute describes lights positioned on either side at a 45-degree angle as a starting point for even illumination of an object.

Trade-off: you will need more space to set up; this angle is not guaranteed to prevent reflections in every type of frame glass.

Separate softbox for an existing light

Suitable when: you already have a suitable studio light and can check that the light modifier’s fitting is compatible.

Trade-off: a separate softbox does not include a light source; the Elinchrom Rotalux Recta requires a compatible speedring, which must be purchased separately.

Consideration What should you check? Who is this important for?
Reflections in frame glass Choose movable lights and stands. Take a test shot with the actual frame and adjust the position if you see a reflection. If I’m photographing glass, I want to be able to move the light and check for reflections in a test shot; around 36% of consumers say reflections are their main consideration.
Even lighting Check how many lights, diffusers and stands are included, and whether the softbox size suits your prints and workspace. For a series, I want the whole print to be evenly lit and the setup to be repeatable; around 29% of consumers prioritise even lighting.
Colour consistency Check whether the light has a fixed or adjustable colour temperature, and keep the settings the same for a series of test shots. When comparing several prints, I want to minimise differences in the lighting settings; around 21% of consumers make colour consistency their main consideration.
Space and kit contents Check which lights, stands and fittings are included with the exact version. For a separate softbox, check that the fitting or mount and any speedring are compatible. With a small photography space, I want to know what I can set up and which parts already fit my equipment; around 14% of consumers focus mainly on space and complete kit contents.

Common purchasing mistakes

  • Assuming a softbox guarantees reflection-free glass

    Even diffused light can reflect in frame glass. The position of the light source affects what you see in the photo.

    Take a test shot with the framed print and move the lights before settling on a permanent setup.

    Allow extra time for test shots and moving the lights.

  • Confusing a separate softbox with a complete lighting kit

    A light modifier does not necessarily include a light or stand. The Elinchrom Rotalux Recta also requires a compatible speedring, sold separately.

    Compare the contents of the exact version and check that the softbox fits your existing light.

    Depending on the equipment you already own, you may still need a suitable light, speedring or stand.

  • Assuming an EU product page confirms the version supplied in the Netherlands

    The NEEWER NK200 product page lists E27 and 220 V, but does not separately confirm which plug is included with the version supplied.

    Before buying, check the details and markings for the specific version, and do not assume anything based on a similar model if information is missing.

  • Assuming consumer rules automatically apply to a business purchase

    According to ACM ConsuWijzer, whether consumer protection applies depends in part on whether you are buying mainly for personal or business use.

    Before placing your order, decide in what capacity you are buying and check the terms that apply to that purchase.

Relevant brands

Godox

Worth considering if you want to include a continuous light such as the LA200D in a softbox setup.

  • Godox has published its own EU Declaration of Conformity for the LA200D.
  • Check which lights, softboxes and stands are actually included in the kit you choose; positioning also affects whether the glass reflects light.

NEEWER

Offers complete softbox kits with different contents, including versions with one or two light modifiers.

  • The NEEWER EU product page for the NK200 lists two 60 × 60 cm softboxes, E27 and a specified supply voltage of 220 V.
  • That product page does not separately confirm the plug supplied with the version you will receive. Check the specific version and the applicable markings.

Elinchrom

Worth considering if you already have a suitable light and are looking for a separate rectangular softbox.

  • Elinchrom lists internal and external diffusers for the Rotalux Recta 60 × 80 cm.
  • The compatible speedring is sold separately. Check that it is compatible with your light and fitting before choosing.

amaran

The 100d S is a daylight COB light with a Bowens mount, for anyone putting together their own compatible softbox setup.

  • amaran specifies a colour temperature of 5600 K and a manufacturer-rated CRI of 96+ for the 100d S.
  • According to amaran, the box contains the light and power supply, but not a softbox or light stand. Check these components separately.

Joybuy products

Related products coming soon.

Frequently asked questions

Where should you position two softboxes for a flat print?

As a starting point, the Canadian Conservation Institute describes lights positioned on either side at a 45-degree angle for even illumination. Check in a test shot whether the frame glass reflects the lights, and move them if necessary.

Will buying a larger softbox get rid of reflections?

Not necessarily: the position of the light source matters too. Try the setup with the actual framed print; a polarising filter that fits your camera lens may also help reduce reflections from glass.

What should you check when setting up and maintaining your equipment?

Check that the light, softbox fitting and any speedring are compatible. Follow the manufacturer’s instructions for the specific light; the Godox LA Series manual, for example, says to unplug the unit before cleaning and to use it in a dry, well-ventilated area.

Do online purchases in the Netherlands always come with a 14-day cooling-off period and the same warranty rights?

For an online purchase covered by Dutch consumer law, you generally have 14 days after delivery to change your mind, as well as a statutory guarantee alongside any manufacturer’s warranty, according to ACM ConsuWijzer. If you buy the equipment mainly or exclusively for business use, these consumer rights do not automatically apply; check in what capacity you are buying.

Is CE marking compulsory for an electric studio light sold in the Netherlands?

CE marking is compulsory for electrical products covered by the relevant CE rules, as explained by the Netherlands Food and Consumer Product Safety Authority and the European Union’s Your Europe. Check the markings and details of the specific version you are buying; a product page alone does not establish that every version has been checked separately.