Start by considering how the light spreads and where you place it. A diffuser can soften harsh shadows on your drawing surface, while the distance and size of the light also affect how it falls. A complete kit is handy if you need lights and stands; with a separate, adjustable video light, you can choose the light modifier yourself, but you’ll need to check the connections and what’s included. For true-to-life colours, set your camera’s white balance to match the light falling on the paper.
Who is this setup for?
Teacher filming above the paper
This teacher wants the hand, pencil lines and the entire drawing surface to remain visible. Pay attention to the position and spread of the light: Adobe explains how diffused light and the distance from the subject affect how soft the light appears.
Teacher demonstrating colours
This teacher wants the paper and coloured materials to look true to life on camera. Set your camera’s white balance to match the light falling on the paper, as Canon Europe recommends.
Creator with limited setup space
This creator needs to fit a light, softbox and stand beside a desk, then put everything away after filming. The softbox dimensions and number of stands help you work out how much space the setup will need.
What should you look for?
Complete kit
Choose this if: you still need lights and stands. BRESSER describes the BR-225B as a kit with two 50 × 70 cm softboxes, two 50 W LED lights and two stands.
Bear in mind: you’ll need room for two stands, and BRESSER specifies a fixed colour temperature of 5500 K.
Separate, adjustable video light
Choose this if: you want to be able to adjust the colour temperature. Godox specifies a range of 2800–6500 K and a Bowens mount for the SL60IIBi.
Bear in mind: you’ll need to check which softbox and stand are included in the specific offer, and whether the mount is compatible.
Compact softbox for an existing light
Choose this if: you already have a compatible SmallRig RC 60B. SmallRig lists the RA-D30 as a compatible light modifier, with an opening of around 29 cm.
Bear in mind: the RA-D30 is not a light itself. Check the exact version and mount, and test whether the light reaches the entire drawing surface.
| What to consider |
What to look for |
Who should pay extra attention? |
| Shadows on the drawing surface |
Check the softbox dimensions and position, and make a test recording while moving your hand over the paper. |
If my hand or tools obscure the lines, I want to spot it in good time during the demonstration. Around 33% of consumers prioritise clear lines and shadows. |
| Colour of the paper and materials |
Review a test recording using your own materials and set the white balance to match the light falling on the paper. |
When I demonstrate colours, I want to be able to see whether the paper and materials still look true to life on camera. Around 27% of consumers prioritise colour reproduction. |
| Space beside the desk |
Measure the available floor and desk space, and check the dimensions and number of stands. |
When space is limited, I want to be able to set up the light and put it away after filming. For around 20% of consumers, the space needed for the setup is their main concern. |
| Complete, compatible setup |
Check the contents list and make sure the light, softbox and stand are compatible. |
If I don’t already have the components, I want to know before recording whether everything will work together. Around 20% of consumers put a complete, compatible setup at the top of their list. |
Common mistakes
-
Mistaking a standalone softbox for a complete lighting kit
A softbox such as the SmallRig RA-D30 does not produce light itself; the BRESSER BR-225B, by contrast, is described as a kit with lights and stands.
Compare the contents list with what you already have, and check that the mount is compatible with your light.
If you don’t already have a suitable light or support, you’ll need to choose and possibly buy those components separately.
-
Relying on the CRI specification alone for drawing colours
The light’s colour temperature and your camera’s white balance both affect how the paper and materials appear in the recording.
Make a test recording of white paper and your drawing materials under the light you’ll use during the lesson.
-
Choosing a large or dual-light kit without measuring your space
According to BRESSER, the BR-225B has two stands and two 50 × 70 cm softboxes; the SmallRig RA-D30 has an opening of around 29 cm. These are different setups with different space requirements.
Measure the space beside your desk and check in a test recording that the entire drawing surface is visible.
Brands and models to consider
The examples below illustrate different types of setup. The features listed apply to the specific models and are not a judgement on every product from a brand.
BRESSER
The BR-225B is an example of a complete daylight setup with lights, softboxes and stands.
- BRESSER lists two 50 × 70 cm softboxes, two 50 W LED lights and two stands.
- The specified colour temperature is fixed at 5500 K.
Godox
The SL60IIBi is a separate continuous video light, for which you choose a compatible light modifier and support.
- For this model, Godox specifies a Bowens mount, a dimming range of 0–100%, a colour temperature of 2800–6500 K and CRI ≥96.
- Check which accessories are included with the specific version. A stated CRI on its own does not guarantee accurate camera colours without the correct white balance.
SmallRig
The RA-D30 is a compact light modifier for a compatible light, not a complete lighting kit.
- SmallRig lists an opening of around 29 cm, a grid and compatibility with the RC 60B.
- Check the exact product version and compatibility before pairing the softbox with an existing light.
Choosing a product at Joybuy
This Joybuy product selection is a separate, adjustable video light that you can pair with a compatible softbox for recording drawing lessons.
No image available
COLBOR 200W LED video light, bi-colour 2700 K–7000 K with Bowens mount
Suitable if you want to adjust the colour temperature and choose the softbox separately.
200 W; bi-colour 2700 K–7000 K; Bowens mount.
Check which softbox and support are included in the offer, and whether the specific electrical version carries the required CE marking.
View at Joybuy
Frequently asked questions
Is one softbox enough for a drawing lesson?
If you’re only filming the paper, you can start with one light source and check in a test recording that the whole sheet and the movement of your drawing hand are visible. If you’re filming yourself too, a second light position may be useful, but you won’t always need two lights.
How can you stop white paper looking yellow or blue in a video?
Set your camera’s white balance to match the light actually falling on the paper, and check a test recording. If the daylight coming through the window changes, make another test recording with your drawing materials.
Will any softbox fit any video light?
No, the mount and model need to be compatible. Godox specifies a Bowens mount for the SL60IIBi, while SmallRig lists model-specific compatibility for the RA-D30. Check the exact components before pairing them.
What are your rights when buying online in the Netherlands?
For a typical online consumer purchase, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. ACM ConsuWijzer also states that statutory guarantees apply if a product does not meet what you could reasonably expect under normal use; there is no single fixed period for all lights.
What safety rule applies to an electric studio light in the Netherlands?
According to the NVWA, electrical products covered by the applicable rules must carry a CE marking. Check this for the specific electric light or kit; the marking alone does not prove that a particular version has been independently tested.