Who is this guide for?

Artists filming pencil details

You want fine lines and shading to remain visible while your hand is moving. So pay attention to the direction and softness of the light on the paper, not just the stated brightness. Canon Europe explains the role of key and fill lighting in controlling shadows.

Artists working with changing window light

You film for longer or at different times of day and want to be able to adjust the lighting as the daylight changes. Adobe points out that the weather and time of day can affect the exposure and colour balance of natural light.

Creators with a small filming space

You need to fit a light, softbox, stand and camera around a drawing table. Check in advance that the components are compatible and what is included with the specific version.

What should you look for when choosing?

Window light with a reflector

Choose this when: the daylight is bright enough and reasonably consistent, and you mainly want to brighten the shadow side of the paper.

Bear in mind: a reflector does not produce light itself; Adobe notes that the weather and time of day can change the exposure and colour balance.

Continuous LED as a supplementary light

Choose this when: a test recording shows that your hand or drawing looks too dark, or when you want to adjust the extra light as the daylight changes.

Bear in mind: you’ll need space and compatible components. Godox specifies 0–100% dimming and a Bowens mount for the SL60IIBi; this doesn’t tell you how bright your paper will look with a softbox attached.

Continuous LED as the key light

Consider this when: you also want to film when there isn’t enough useful window light, and you can recreate the setup for each session.

Bear in mind: you’ll be less dependent on daylight, but you’ll need more equipment and setup time. Assess the light on the paper with both the light and your chosen softbox in place.

For this specific filming setup, the points below can help you choose your lighting, camera settings and compatible components.

What to consider What should you check? Who is this important for?
Pencil lines and drawing surface Make a test recording with and without a diffuser, and assess the light on your own paper. When I film fine pencil lines, I want my hand and shadows not to obscure the portrait. Around 40% of consumers prioritise preserving detail.
Changing window light Decide whether a reflector is enough; if you’re choosing a light, compare the adjustable brightness and colour temperature of the exact model. When the light from the window changes during a recording, I want to be able to adjust the exposure. Around 30% of consumers prioritise changing daylight.
Lighting and camera for video Film a short test with the intended light setting and check the footage for banding and distracting shadows. When I draw while filming, I want to check that the footage remains usable. Around 20% of consumers prioritise the combination of lighting and camera.
Compatible components Check what’s in the box, that the light and softbox fittings are compatible, and that the power supply is included with the exact version. In a small filming space, I want to know in advance that the components work together and will fit around the drawing table. Around 10% of consumers prioritise having a compatible setup.

Common buying mistakes

  • Mistaking a standalone softbox for a complete lighting kit

    A softbox shapes the light, while the light itself is the light source. The Godox SL60IIBi and the Godox softbox are separate components.

    Check what’s included in the exact offer and compare the fittings on the light and softbox. Bear in mind that you may need to buy a continuous LED, a compatible fitting or a stand separately.

  • Treating a lux figure measured with a reflector as a softbox reading

    The stated light output may differ with another setup. Godox gives the figure for the SL60IIBi with its standard reflector; Aputure publishes separate figures for the bare light and the Hyper Reflector.

    Compare the measurement setup and distance, and make a test recording with the softbox you actually plan to use.

  • Assuming every European product page means the plug is suitable

    NEEWER’s European product page lists a US Plug for one CB60B version on offer. The stated input voltage alone doesn’t confirm which plug is supplied with the version for the Netherlands.

    Before buying, check the plug and the full contents of the specific version on offer.

Relevant brands for reference

Godox

The SL60IIBi is a continuous LED with adjustable colour temperature and a Bowens mount. It can be paired with a compatible softbox chosen separately.

  • Godox states that the SL60IIBi is dimmable from 0–100% and adjustable from 2800–6500 K.
  • The stated light output is measured with the standard reflector, not with a softbox over the drawing surface. Check the light and softbox as separate components.

amaran

The amaran 100x S is a continuous LED with a Bowens mount, for anyone who wants to choose a compatible softbox separately.

  • Aputure specifies a colour temperature of 2700–6500 K and CRI 95 for this model.
  • The published lux figures are for the bare light or a light with a Hyper Reflector, not the softbox setup you intend to use.

NEEWER

The CB60B is an example of a dimmable bi-colour LED with a Bowens mount.

  • NEEWER specifies an adjustable colour temperature of 2700–6500 K and a Bowens mount for the CB60B.
  • The European product page lists a US Plug for one version on offer. Check the plug supplied with the version you want to order.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a softbox light when filming in window light?

No. Start by trying indirect window light and, if needed, use a white reflector to brighten the shadow side. A continuous LED can help when the daylight is too dim or variable; Adobe explains how the weather and time of day can change natural light. Compare both options with the same drawing in shot.

How can I check whether the lighting works well for video?

Make a short recording while you’re actually drawing, then check for shadows cast by your hand and pencil, as well as any banding in the footage. Sony Support recommends changing the shutter speed if you see flickering; the setting that works will depend on your camera and light source.

How should I use and maintain an electric light at my drawing table?

Follow the manual for the exact model. For the SL60IIBi, Godox advises keeping the ventilation clear and the unit dry, unplugging it before cleaning, and allowing the light to cool before putting it away.

What are my rights when buying online in the Netherlands?

For a standard online purchase, you generally have a statutory 14-day cooling-off period after delivery, subject to exceptions, according to ACM ConsuWijzer. The seller must also provide a remedy if, under normal use, a product does not meet what you were entitled to expect; a commercial manufacturer’s guarantee does not replace this right.

Which product regulations apply to an electric video light in the Netherlands?

Check the product information for the exact light and power supply, as the applicable regulations depend on the product. According to the European Commission, CE marking is only required for products covered by harmonised EU rules; the Low Voltage Directive applies to electrical equipment within the specified limits of 50 to 1000 V AC. A CE marking alone does not confirm which version or plug a seller supplies.