Who is this lighting setup right for?

Maker looking to show off a sculpture’s shape

You photograph your own small three-dimensional work and want to adjust the direction of the light and shadows to bring out curves and texture.

Seller who needs consistent product photos

You photograph several small objects and want a clean background and a setup you can recreate each time.

Photographer short on table space

You need to position the light, diffusion and support so they don’t get in the way of the sculpture or your chosen camera setup.

What should you look for when choosing?

First, choose between a light source you can position freely and an enclosed tent. Then consider whether the setup suits the surface, the way the material reflects light and the space available on your table.

Separate softbox, light and stand

A good fit if: you want to change the direction of the key light to control texture, curves and shadows. amaran lists the COB 60x S as a suitable light for the Light Box 45x45.

Bear in mind: you’ll need to match the light, stand and connection separately. Also measure how much space the complete setup will take up.

Light tent with built-in LEDs

A good fit if: you want to photograph small objects repeatedly in diffused light against a clean background. NEEWER describes the LP40 as a foldable 40 × 40 × 40 cm tent with built-in LEDs.

Bear in mind: the space inside the tent and its shooting openings limit where you can place the sculpture and camera. Even lighting won’t automatically bring out texture.

Compact desk light with diffusion

A good fit if: you have little space beside the table and want a small, movable light source. Godox describes the LC30D/LC30Bi for tabletop setups with separate diffusion accessories.

Bear in mind: a separate light isn’t automatically a softbox kit. Check the diffuser, arm, power supply and mount for the version you choose.

What to consider What to look for when buying Who is this important for?
Shape and texture Check whether you can position the light and diffusion at the angle you want, and whether the stand is suitable. I want to show curves and texture by changing the direction of the light, not just create an evenly lit surface. Around 28% of consumers prioritise bringing out shape and texture.
Space on and around the table Measure the table, the object and the clear space around them. amaran lists the assembled Light Box 45x45 as measuring 45 × 45 × 34.5 cm; NEEWER gives the LP40 a working space of 40 × 40 × 40 cm. If I have little free space on my table, I still need room for the camera and light source. Around 22% of consumers prioritise the space available for setting up.
Reflections on the material Consider whether the object is glossy and whether you can change the diffusion, light position or shooting angle. For glossy details, I want to adjust where the light source is reflected on the surface without losing the shadows that show the shape. Around 22% of consumers prioritise controlling reflections.
A complete, compatible setup Check what’s in the box and whether the light modifier and light are compatible, as well as the power supply and stand. Nanlite lists an FM mount for the Forza 60B II; its manual says you’ll need a Bowens adapter before using a Bowens accessory. I want to know which components I need before putting the setup together, and whether they’re compatible. Around 17% of consumers prioritise having a complete, compatible setup.
Colour rendering Compare the colour temperature and stated colour rendering of the exact version. Keep your light sources and camera settings consistent while shooting. If the colour of the material matters, I want to keep the lighting and camera settings consistent. Around 11% of consumers prioritise colour rendering.

Common buying mistakes

  • Assuming a softbox is a complete lighting kit

    The amaran Light Box 45x45 is a light modifier; the box contents listed by amaran don’t include a light.

    Check what’s included in the package and that each component is compatible before putting your setup together.

  • Assuming every light modifier fits every light

    According to its manual, the Nanlite Forza 60B II has an FM mount. You’ll need a Bowens adapter before using a Bowens accessory.

    Compare the mounts on the exact light and modifier you’re choosing, and check whether any required adapter is included.

  • Choosing a light tent without checking the shooting angle

    The NEEWER LP40 has an enclosed working space and specific shooting openings. This can limit where you position the sculpture if you also want to photograph it from the side.

    Measure the object and decide in advance which sides and camera angles you want to capture.

Relevant brands to compare

amaran

For reference: amaran offers the Light Box 45x45 as a separate Bowens softbox and lists the COB 60x S as a suitable light.

  • amaran lists a diffusion cloth and a light control grid with the softbox.
  • A light and stand aren’t included in the listed box contents. Also check the connection on the combination you choose.

NEEWER

For reference: the LP40 is a foldable light tent with built-in LEDs for small objects.

  • NEEWER lists a 40 × 40 × 40 cm working space and several shooting openings for the LP40.
  • The manufacturer’s claims about reflections and colour rendering aren’t based on an independent test with sculptures.

Godox

For reference: Godox offers QR Series softboxes and compact LC30D/LC30Bi desk lights, for which diffusion accessories are described.

  • Godox describes the LC30D/LC30Bi for a compact tabletop setup.
  • A separate LC30 light isn’t automatically a softbox kit. Check the diffuser, stand and power supply for each package.

Nanlite

For reference: the Forza 60B II is an adjustable light for use with a separately chosen light modifier.

  • The Nanlite manual specifies an FM mount.
  • According to the manual, you’ll need a Bowens adapter before using a Bowens accessory. Also check that the specific light modifier is suitable.

Joybuy products

Related products coming soon.

Frequently asked questions

How do you start lighting a small figurine?

Start with a single diffused key light that you can move around, and see how the shadows bring out the shape. Add fill light only if the shadow side is too dark for your shot. Adobe recommends a controlled environment with good lighting and a clean background for product photography.

Can a Bowens softbox fit directly onto a Nanlite Forza 60B II?

Not according to the Nanlite manual: the Forza 60B II has an FM mount, and you need to fit a Bowens adapter before using a Bowens accessory. Also check that the specific light modifier and stand are suitable.

Does the amaran Light Box 45x45 include a light?

No, the box contents listed by amaran don’t include a light. Also check whether the suitable light and support are included in the package you choose.

What warranty applies to a consumer purchase in the Netherlands?

You have a legal guarantee in addition to any manufacturer’s or seller’s warranty. ACM ConsuWijzer explains that a product must meet what you could reasonably expect from it under normal use; if there’s a problem, contact the seller. There isn’t one fixed legal guarantee period for every product.

What should you check when buying electrical photography lighting for use in the Netherlands?

Check which product rules and documentation apply to the specific light or adapter. Business.gov.nl explains the responsibilities for applicable European product rules. According to Your Europe, CE marking is only compulsory when EU harmonisation rules require it for that product. A CE mark is a declaration of conformity, not an independent assessment of quality.