Which setup is right for you?

Maker looking to show texture

You photograph small sculptures and want to capture their material, finish and three-dimensional shape clearly. Light direction, diffusion and fill light are important considerations; Broncolor explains how directional lighting can reveal the shape of an object.

Seller with lots of product photos

You want to photograph small sculptures consistently against a clean white background. Canon Europe discusses light tents as a setup for product photography with minimal shadows. Consider whether an even image matters more to you than pronounced texture.

Photographer short on storage space

You set up your photography space when needed and put it away afterwards. So check the dimensions both in use and when stored, the power supply and which components you’ll need alongside the light shaper.

What should you look for?

Consideration What to look for when buying Who is this important for?
Retaining texture and shadows Check whether you can move the light source and whether diffusion or a suitable grid is available. If you want the structure and shape of a sculpture to stand out, you’ll need to be able to adjust the direction and fill of the light. Around 33% of consumers prioritise texture and shape.
White background and subject detail Check whether the background is white and whether you can position or adjust the lighting for the subject and background separately. A clean white background can be important for catalogue photos, but you’ll also want to preserve the outline of a light-coloured sculpture. Around 27% of consumers prioritise an even background.
Workspace and storage Compare the internal dimensions and opening with your sculpture and the camera angle you want. Also check its size when packed away. If you can’t leave your photography space set up permanently, the setup needs to fit both while you’re using it and when it’s stored. Around 20% of consumers prioritise space and storage.
Complete kit and connections Check whether the light, fitting, any speedring, stand and power supply are included in the specific version. If you don’t already have suitable equipment, you’ll want to know in advance which additional components you need to take photos. Around 20% of consumers start by checking whether the kit is complete and compatible.

Common pitfalls

  • Assuming a softbox comes with a complete lighting kit

    A softbox on its own doesn’t produce any light. The fitting also needs to match your light; some setups require a separate speedring too.

    Before buying, check which lights and components you already have and compare them with the parts list for the exact version.

    You may need to buy a suitable light, speedring or stand separately.

  • Removing every shadow when texture matters

    With a sculpture, the direction of the light and the way shadows fall can help reveal its shape and surface texture. Diffuse light from all around gives you less control over those shadows.

    First decide whether you mainly want an even catalogue photo or visible texture, then choose your lighting setup.

  • Looking only at the external dimensions or built-in LEDs

    The usable space and opening determine whether you can photograph the sculpture from the angle you want. NEEWER states that the power adapter is not included with the LB30B and LB40B.

    Check the internal dimensions, object size, camera angle, power supply and included accessories for the exact version.

Brands to consider

Godox

Separate Bowens softboxes, including the 60 × 60 cm SB-FW6060 with grid, for anyone choosing their own suitable light and lighting direction.

  • Godox specifies a Bowens fitting and grid for the SB-FW6060.
  • It isn’t a complete lighting kit, so check that the fitting is compatible with your light.

NEEWER

Illuminated light tents, including the LB30B and LB40B, for anyone considering a compact all-in-one setup.

  • According to NEEWER, the internal dimensions are 30 × 30 × 30 cm and 40 × 40 × 40 cm respectively.
  • The manufacturer states that the power adapter is not included. The stated illuminance for the different versions was measured at different distances, so the figures aren’t directly comparable.

Hama

The foldable ToGo 00004664 is an illuminated light tent for product photos that you can put away after use.

  • Hama lists dimensions of 50 × 50 × 50 cm, a diffuser cloth, backgrounds and adjustable LED lighting.
  • The fixed shape of the tent gives you less freedom to direct light at a small area of texture than a separately movable light.

Profoto

RFi softboxes are an option if you want to use a separate light shaper with a compatible flash or studio setup.

  • Profoto lists double diffusion and a recessed front for the RFi 2 × 3 ft.
  • An RFi speedring is sold separately. Profoto also states that accessories from other Profoto softbox ranges aren’t necessarily compatible with RFi.

Joybuy products

Related products coming soon.

Frequently asked questions

Should the sculpture be lit as brightly as the white background?

No, not if that makes its outline or texture disappear. Start by lighting the sculpture directionally and assess the background separately. The right balance depends on the material, colour and shadows you want. In one example, Broncolor shows separate lighting roles for the subject and background, but those studio settings aren’t a rule for every sculpture.

Will any softbox fit my existing light?

No. Check the fitting and any speedring required for both exact models. Godox specifies a Bowens fitting for the SB-FW6060; according to Profoto, the RFi 2 × 3 ft requires an RFi speedring, sold separately.

What should I check before setting up and putting away my equipment?

Compare your sculpture and the camera angle you want with the internal dimensions and openings of a light tent. If you’re using a separate softbox, also check that you have a suitable light, stand and diffusion. NEEWER states that the adapter for the LB30B and LB40B is not included. Also check the instructions for storing the cloth and backgrounds.

What are my rights when buying online in the Netherlands?

For eligible consumer purchases made at a distance, you generally have 14 days after delivery to change your mind; ACM ConsuWijzer notes that exceptions may apply. You’re also entitled to a product that meets legal requirements. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands. If something is wrong with the product, contact the seller.

Is CE marking required for my lighting?

That depends on the electrical components and the regulations that apply to them. For electrical equipment covered by the Low Voltage Directive, the Netherlands Food and Consumer Product Safety Authority gives the limits as a rated AC voltage of 50–1000 V or a DC voltage of 75–1500 V. These limits don’t mean that every fabric softbox or USB-powered light tent falls under exactly the same directive. Check the electrical components of the specific product.