Who is this guide for?

Mosaic maker working with glossy tiles

Wants to control reflections on the tiles without losing sight of the grout lines and changes in height. Adobe explains how a reflector bounces existing light back, while Profoto explains how the relative size of a light source affects the softness of the light.

Mosaic maker comparing colours

Wants to capture tile and grout colours accurately, so pays attention to a consistent light source, white balance and exposure. Canon Europe explains why white balance matters in challenging lighting conditions.

Photographer with a small workspace

Wants to set up and pack away a white background and diffused lighting quickly. Adobe describes a light tent as an enclosed space that diffuses light for small objects; just check that your sample and preferred framing will fit inside.

What should you consider?

Separate softbox and light

Suitable when: you want to adjust the direction of the light to assess reflections and texture separately, or need space for a larger sample.

The trade-off: check the light, mount or speedring, stand and any diffusers; a softbox isn’t automatically a complete lighting kit.

Light tent with built-in lighting

Suitable when: the sample fits within the usable space and you want a compact setup for photographing small objects against a white background.

The trade-off: diffused light can create more even illumination, but take a test shot to check that the grout lines and texture are still visible enough.

What to consider What should you check? Who is this important for?
Sheen and texture Can you move the light source? Check the sheen and grout lines in a test shot. If I want to photograph glossy tiles without flattening the grout lines with the lighting, I look for control over the direction of the light. Around 33% of consumers prioritise controlling sheen and preserving texture.
Colour and white background Set the white balance to match the light source you’re using and check that detail isn’t lost in the light-coloured tiles. If I want the tile and grout colours to remain recognisable against white, I look for consistent lighting conditions and white balance. Around 27% of consumers prioritise colour retention.
Size and workspace Measure the sample, including the desired margin around it, and compare this with the usable interior space. If you’re using a separate softbox, allow room for the light and stand too. If my sample needs to fit in a tent with the framing I want, I start by checking its dimensions and the space available. Around 20% of consumers prioritise size and workspace.
Mount and components Check the exact mount, the included speedring and diffuser, as well as any light, stand or power supply you’ll need. If I want to put together a complete, working setup, I check in advance which components are compatible with my light source and which ones I already have. Around 20% of consumers prioritise compatibility and having a complete kit.

What to watch out for when buying

  • Assuming a separate softbox comes with a complete lighting kit

    A softbox shapes the light, but needs a compatible light source and mount. For the Profoto RFi 2×3′, Profoto states that an RFi speedring is required separately.

    Before buying, compare what’s included in the version you’ve chosen with the light, mount, diffusers and stand you already own.

  • Choosing a light tent based on its external dimensions alone

    The PULUZ PU5041B is listed as measuring 40 × 40 × 40 cm, but that doesn’t tell you how much room will be left for the sample and your preferred framing.

    Measure the sample and the margin you want around it, and check that the shooting window suits the camera angle you plan to use.

  • Making the background white without checking the tiles

    Highlights that are too bright can make detail disappear from light-coloured tiles, while an unsuitable white balance can shift their colours.

    Take a test shot with a fixed white balance and check both the background and the light-coloured areas of the tiles. If needed, use the histogram to spot lost highlight detail.

Brands to consider

Godox

Godox describes the SB-FW6090 as a rectangular 60 × 90 cm softbox with a Bowens mount and grid.

  • The stated size and mount make it easier to compare the softbox with your light source and available workspace.
  • Check whether the light and other components you need are included in the specific version.

SmallRig

SmallRig lists a Bowens mount, quick-release design and grid for the RA-R6090.

  • The stated size is 60 × 90 cm; the manufacturer also specifies internal and external diffusion.
  • Check that the mount fits your light source and that your stand and other components are suitable.

Bresser

The manufacturer describes the Bresser Quick Lock 60×90 softbox as including a Bowens speedring, two diffusers and a grid.

  • According to Bresser, the version described also includes a carry bag.
  • Check what’s included in the specific offer and whether the components supplied are compatible with your lighting setup.

PULUZ

PULUZ describes the PU5041B as a 40 × 40 × 40 cm light tent with built-in LEDs, a diffuser and shooting openings.

  • For this model, PULUZ specifies an adjustable lighting mode and 5 V USB power.
  • Check that the sample fits within the usable space and that the light makes its texture visible enough.

Profoto

Profoto lists the RFi 2×3′ as measuring 60 × 90 cm, with double diffusion and an optional grid.

  • The stated dimensions give you a useful point of comparison for a rectangular softbox.
  • According to Profoto, this model requires an RFi speedring, sold separately.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do I need two softboxes for one mosaic sample?

Not necessarily. Start with one movable diffused light and assess the shadows and reflections. A white reflector can bounce existing light back towards a darker side without acting as a second light source. An extra light requires more space and adjustment.

Why does the white background look grey, or why do the tiles have a colour cast?

The background and mosaic may be lit differently, so check both in a test shot. Set the white balance to match the light source you’re using, and check the histogram to see whether detail is disappearing from the light-coloured tiles.

What should I check when assembling and maintaining the setup?

For a separate softbox, check the exact light mount, the speedring required, the attachment and the diffusers included. Store diffusers clean and dry, and follow the instructions for your model. For example, the Profoto RFi 2×3′ requires a separate RFi speedring.

What costs and consumer rights should I consider when buying online?

Compare the cost of the complete setup, including any missing light, speedring, stand or power supply. According to the Dutch government, online purchases often come with a 14-day cooling-off period. In the Netherlands, statutory consumer rights apply without a fixed statutory guarantee period; if a product is faulty, contact the seller.

Is CE marking required for a complete studio lighting kit in the Netherlands?

The Netherlands Food and Consumer Product Safety Authority states that CE marking is required for electrical products to which this requirement applies, such as an electric studio light. Check the product rules that apply to the specific light or power supply; the same requirement does not automatically apply in the same way to a passive fabric softbox. CE marking is not an independent photography test.