Who is this choice relevant to?

Maker who prioritises visible stitches

You mainly film your hands and work surface, and want to soften shadows without flattening the stitch pattern. Adobe Stock Contributor explains that a larger light source can produce softer shadows.

Maker who explains yarn colours

You show differences in yarn colour and want to control the light colour and camera white balance while recording. Adobe explains that white balance affects the colours in the image.

Maker with a small, shared room

You set up and pack away your filming space each time. So think about more than just the softbox: consider the tripod legs, where it will sit beside the table and which parts you already own.

What should you look for when choosing?

Complete softbox kit

Choose this option: if you don’t yet have a suitable light and tripod, and film in a fixed location. NEEWER lists softboxes, E27 sockets, LED bulbs and tripods for the European NK200 version.

Bear in mind: according to NEEWER, the included bulbs have a fixed colour temperature of 5700 K; a tripod takes up floor space. Also check whether the version you choose includes two or three bulbs.

Separate softbox and light

Choose this option: if you already have a suitable continuous light or want to choose the light and modifier separately. Godox lists dimming and an adjustable colour temperature of 2800–6500 K for the SL60IIBi.

Bear in mind: the light, softbox and tripod must all be compatible. The light output Godox specifies for the SL60IIBi is with the standard reflector, not necessarily with a softbox.

Compact softbox for a specific model

Choose this option: if you already have a compatible SmallRig RC 60/100 light and are looking for a separate modifier. SmallRig lists diffusion cloths and a grid for the RA-D60.

Bear in mind: this isn’t a complete lighting kit or a general replacement for other mounts. Check the exact light version, power supply and fitting beforehand.

For consumers filming a knitting lesson in a spare room, these are four different potential priorities for a first purchase. The right choice depends on what you already own and how you position the table and camera.

Adobe Stock Contributor explains that a larger light source produces softer shadows, while Adobe points out that white balance affects the colours in the image. So make a test recording with your hands moving and the yarn you plan to show.

What to consider What should you check? Who is this important to?
Stitches and shadows Check the size and adjustability of the softbox; make a test recording with both hands above the work surface. If I want to show stitches clearly while my hands are moving, I look for soft light that doesn’t flatten the texture. Around 33% of consumers in this setup would make visible stitches their top priority.
Yarn colour Compare the colour of the light with the available light, set the white balance and test it with the yarn used in the lesson. If I’m explaining subtle yarn shades, I want to control the lighting and camera white balance while recording. Around 27% of consumers in this setup would prioritise colour accuracy.
Space and set-up Measure the space beside the table and allow for the softbox when open and the tripod legs. If I have to rearrange the shared spare room each time, I want to be able to film without blocking the space around the table. Around 20% of consumers in this setup would prioritise space and set-up.
Kit and compatibility Check whether the light, softbox, tripod and suitable socket or mount are included. If I don’t yet have a continuous light, I want to know whether the parts in the box will work together to create a usable set-up. Around 20% of consumers in this setup would check the kit contents and compatibility first.

Common buying mistakes

  • Assuming a separate softbox is a complete video lighting kit

    A softbox is a light modifier and doesn’t produce light itself. The Godox softbox and SmallRig RA-D60 are separate modifiers, while NEEWER describes the European NK200 as a kit with lights and tripods.

    Compare the contents and fittings of the exact version before choosing based on size.

  • Reading ‘700W’ in the NK200 name as the actual bulb power

    NEEWER lists the included LED bulbs as 35 W each. The higher figure in the name does not represent the actual electrical power of a single bulb.

    Check the stated bulb power and the contents of the version you choose; don’t assume these will tell you how bright your work surface will look on camera.

  • Assuming different mounts are interchangeable

    The European NK200 has an E27 socket, the separate Godox softbox uses Bowens, and the SmallRig RA-D60 is designed for the RC 60/100 series.

    Check the regional version and the mount on both the light and modifier before combining components.

Brands to consider

NEEWER

The European NK200 is designed as a complete kit for anyone starting out with softboxes, lights and tripods.

  • NEEWER lists E27 sockets and 35 W LED bulbs with a fixed colour temperature of 5700 K.
  • Versions with two or three bulbs are available, so check which one you’re choosing. The ‘700W’ in the name is not the actual electrical power of a single bulb.

Godox

The SL60IIBi is suited to a set-up where you choose a continuous light and modifier separately.

  • Godox lists dimming and an adjustable colour temperature of 2800–6500 K for the SL60IIBi.
  • A separate softbox doesn’t automatically include a light or tripod. The light output Godox specifies for the light is with the standard reflector.

SmallRig

The RA-D60 is a separate, model-specific modifier for owners of a compatible RC 60/100 light.

  • SmallRig lists inner and outer diffusers and a 45° grid.
  • Check the exact light version, power supply and mount; the softbox is not a complete lighting kit.

amaran

The COB 60d S is a separate Bowens-mount continuous light with a fixed daylight colour temperature.

  • amaran lists 5600 K and dimming for this model.
  • A softbox is not included in the listed box contents, so check what other parts you’ll need.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a flash or continuous lighting for a knitting lesson?

Continuous lighting is a good choice for moving hands: it stays on while you film, unlike a photographic flash. A separate softbox without a light won’t produce light itself.

How should I position the light to avoid casting shadows over the stitches?

Aim the diffused light diagonally at the work surface and make a test recording while moving both hands. Move the light until the stitch pattern stays visible, and check the image when you lift your work, too.

How can I stop yarn colours changing between recordings?

Keep the lighting as consistent as possible and set the camera’s white balance for those conditions. Changing daylight from a window can affect the exposure and colour balance while you’re recording.

What should I check before pairing a separate softbox with a light?

Check that the softbox mount fits the exact version of the light, and that you have the light, tripod and power supply. A separate softbox won’t necessarily include the other parts needed for a working set-up.

What are my rights if a lighting kit bought online is disappointing or breaks too soon?

For a standard online purchase, ACM ConsuWijzer says you generally have a statutory 14-day cooling-off period after delivery, subject to exceptions. You’re also entitled to a legal guarantee if the product doesn’t perform as you could reasonably expect under normal use. Contact the seller to resolve the issue.