Who is this setup for?

Photographers working with a dark background

If spill light is making your background lighter than intended, consider how well you can control the light rather than focusing only on the size of the softbox. Profoto lists background control as one use for its specific Softgrid 3' Octa.

Makers who want to show off knitting stitches

If you want the texture and shape of knitted gloves to stand out, assess the direction of the light and the resulting shadows together in test shots. The right balance depends on where you position the light.

Buyers with an existing studio light

A separate light shaper is only useful if its mount fits your lamp. Check whether you also need a separate speedring or other components for your chosen combination.

What should you look for when choosing?

Don’t choose based on size alone: control the light, check the knitting texture and make sure you can mount the softbox on your light source.

Rectangular softbox for a Bowens light

A good fit if: you already have a compatible Bowens light source and want to use one movable light. Godox lists the SB-FW6090 as a rectangular 60 × 90 cm softbox with a grid.

Keep in mind: a softbox shapes light; it isn’t a lamp. Its stated dimensions alone won’t predict how the gloves will be lit.

Softbox with a compatible grid

A good fit if: a test shot shows spill light brightening the background and you can use a grid made for your exact softbox series.

Keep in mind: Profoto specifies a 50° beam angle for its Softgrid 3' Octa and says it is not compatible with the RFi, OCF and Clic series. A narrower beam may also leave part of the glove less evenly lit.

Compact light shaper for accent lighting

A good fit if: you want to add light to a specific area and can use your existing lamp with the right mount. Broncolor describes its 35 × 60 cm model as suitable for product lighting.

Keep in mind: Broncolor says this compact model should not automatically be considered a soft light source; the speedring is supplied separately.

What to consider What to look for Who it matters to
Keeping the background dark Check that a grid is compatible with the exact softbox series and assess the background in a test shot. If I want to keep the background dark, I need to be able to limit spill light and check the effect; around 31% of consumers put background control first.
Knitting texture and shape Compare test shots with different light positions and diffusion; look at both the stitches and the shadows. When I want the stitches to remain visible without lighting the glove flat, I consider both the direction of the light and the shadows; around 31% of consumers give visible knitting texture top priority.
Mount and components Compare the lamp mount with the softbox and check whether the lamp, grid and any speedring are included. I want to keep using my existing lamp and first check that the mount and any required components are compatible; around 23% of consumers prioritise compatibility and a complete setup.
Setting up in a limited space Compare the dimensions and mounting method with your workspace; don’t assume a smaller model will give softer light. If my workspace is limited, I want to be able to position and store the light shaper easily without assuming it will give softer light; around 15% of consumers prioritise a compact setup that’s quick to put together.

Softbox buying pitfalls

  • Thinking a standalone softbox is a complete lighting kit

    A softbox shapes light, but it doesn’t produce it. You can’t use the intended setup without a compatible light source.

    Check the lamp mount and what’s included in the version you choose. You may also need a lamp, stand or adapter for a complete setup.

  • Assuming every grid fits every softbox

    Softbox series may not be compatible with one another. A grid that doesn’t fit won’t give you the intended control over the light.

    Check the full series and model names on the grid and softbox before combining them.

    You may need a different, compatible grid or light shaper.

  • Assuming a small softbox will automatically give softer light

    Broncolor warns that its compact 35 × 60 cm model does not automatically produce soft light, so a small size doesn’t guarantee a particular shadow effect.

    Choose the size and position based on the lighting effect you want, then assess the knitting texture in test shots.

Relevant brands to consider

Godox

Godox offers separate light shapers, including the SB-FW6090 for compatible Bowens lights.

  • Godox specifies a rectangular 60 × 90 cm size and a Bowens mount for the SB-FW6090.
  • This mount doesn’t confirm that the softbox will fit a lamp with a different mount, and its size alone won’t predict the result on gloves.

SmallRig

The RA-D85 (3586) is an 85 cm parabolic softbox with a quick-release design. It is intended for the lights listed by SmallRig and other compatible Bowens lights.

  • SmallRig highlights quick setup as a benefit.
  • SmallRig’s stated setup time of 15 seconds is a manufacturer claim, not an independent measurement for every user. Also check which components are included in the version on offer.

Broncolor

Broncolor offers, among other products, a compact 35 × 60 cm softbox for targeted product lighting.

  • Broncolor describes the model as suitable for product lighting.
  • Broncolor warns that the small model does not automatically produce soft light; the speedring is not included.

Profoto

A Profoto Softgrid 3' Octa is worth considering if you already have a compatible Softbox Octa and want to limit spill light.

  • Profoto lists background control as one use for this grid and specifies a 50° beam angle.
  • Profoto says it is not compatible with its RFi, OCF and Clic softbox series; this compatibility information applies to the grid mentioned here.

Light sources for a softbox setup

This selection focuses on a light source for use with a compatible Bowens softbox. The light shaper and any grid are separate components and must fit the lamp.

COLBOR 200W LED video light with Bowens mount

COLBOR 200W bi-colour LED video light, Bowens mount

This light can be used as the light source in a softbox setup with a compatible Bowens mount; the softbox itself is a separate component.

The product name specifies 200 W and bi-colour. The product description lists an adjustable colour temperature of 2700 K–7000 K and adjustable brightness.

View at Joybuy

Frequently asked questions

Do I need two softboxes for these gloves?

Not necessarily. Start with one movable light source and assess the shadows and background in a test shot. It’s a practical starting point, not a guarantee that one lamp will produce every photo you want.

Can I use a standalone softbox without a lamp?

No. A softbox shapes the light from a separate light source. Before setting it up, check that the mount is compatible and whether a speedring, diffusion panel and grid, if needed, are included in the version you’re buying.

How can I make sure the setup is still usable after buying it?

Only combine components that the manufacturer says are compatible, and check the mount again when you change light shapers. The Profoto Softgrid 3' Octa has specific compatibility restrictions for the RFi, OCF and Clic series.

What if a lamp bought in the Netherlands breaks sooner than expected?

According to ACM ConsuWijzer, if a product breaks sooner than you could reasonably expect under normal use, the seller must offer an appropriate solution free of charge, such as a repair, replacement or refund. A manufacturer’s warranty does not replace this statutory right.

Which safety rules apply to a softbox lighting kit?

The applicable requirements depend on the type of product. Ondernemersplein outlines European safety requirements for electrical and electronic equipment and notes that CE marking is mandatory for certain product groups. Assess electrical components separately; a fabric softbox is not the same type of product as a lamp.