Start with reflections: keep the camera directly in front of the print and move the light to the side until the softbox is no longer reflected in the glass. One softbox may work for a small set-up; lighting from both sides can be more useful for even reproduction. A grid helps keep light off a dark background, but won’t automatically prevent reflections in the glass.
Who is this set-up for?
Photographers of artwork behind glass
If you want to capture a framed print straight on without distracting reflections, carefully positioning your lights is key. The Photographing Artwork guide from the New Mexico State Committee of the National Museum of Women in the Arts describes using two light sources on either side of the artwork, at a 45° angle.
Photographers making reproductions
If you’re photographing several prints, look for even lighting across the whole surface and a consistent set-up. Check the edges and corners in test shots, too.
Photographers working with a dark background
If you want to keep the background dark, consider the direction and spread of the light. A grid can help keep light off areas outside the subject, but positioning the light still matters.
What should you look for when choosing?
| What to consider |
What should you look for? |
Who is this most relevant for? |
| Reflections in glass |
Keep the camera parallel to the print and move the lights to the side if they’re visible in the glass. The guide from the New Mexico State Committee of the National Museum of Women in the Arts also suggests safely removing the glass, if possible, or using cross-polarisation. |
If I want to photograph a print straight on without the softbox appearing in the glass, I start by adjusting the light position. Around 36% of consumers make controlling reflections their top priority. |
| Even lighting |
Compare the brightness on both sides and check the edges and corners in a test shot. Two light sources on either side can be a good starting point; adjust them based on any visible reflections. |
When I want to reproduce prints consistently, I make sure the whole surface is lit evenly. Around 29% of consumers put even lighting first. |
| Dark background |
Check whether light is falling on the background beside the frame, and whether the model you’ve chosen includes a suitable grid. A grid limits the spread of light, but won’t automatically solve reflections in the glass. |
If I want to keep the background dark, I focus on light falling beside the print. Around 21% of consumers put background control first. |
| Mount and accessories |
Check that the mount is compatible with your exact light or flash unit, and review what’s included in the box. Profoto states that the Profoto RFi Softbox 2x3' requires a separate RFi speedring. |
If I want to use my existing light, I need to know that the mount fits and which other parts I’ll need. Around 14% of consumers make compatibility and what’s included their main considerations. |
Common pitfalls
-
Expecting a larger softbox to eliminate every reflection in the glass
With glass, the angle partly determines whether the light source is reflected in it; a larger light source won’t solve the problem on its own.
Keep the camera parallel to the print and test different light positions before choosing a size.
-
Assuming a grid will eliminate reflections
A grid limits spill light reaching the background, while reflections in the glass may require a different adjustment to the set-up.
Assess reflections in the glass and light on the background separately in a test shot, and check whether the grid is included with the exact model.
-
Focusing only on size and forgetting the mount
A softbox needs to fit your light source. The manufacturer states that the Profoto RFi Softbox 2x3' requires a separate RFi speedring.
Before buying, check the model codes and the connections on both the softbox and your light or flash unit.
Brands to consider
Godox
Godox describes the SB-FW6090 as a rectangular 60 × 90 cm Bowens softbox with a grid.
- The stated size and grid may be useful if you want to direct the light towards the print.
- Check that the listing is actually for the SB-FW6090 and see which light and stand are included. The grid won’t automatically prevent reflections in glass.
amaran
The amaran Light Box 60x90 is a rectangular Bowens softbox with diffusion, an inner diffuser and a grid.
- According to amaran, this model is quick to set up and folds flat for storage.
- The compatibility stated by amaran applies to suitable Bowens fixtures up to 600 W, not every light. The softbox itself does not produce light.
NEEWER
The European brand page describes the NS93P as a rectangular 60 × 90 cm Bowens softbox with two diffusion layers and a grid.
- The manufacturer highlights its quick-release design and a grid for directing the spread of light.
- Check the exact NS93P variant, the compatible light source and what’s included in the box. The brand’s information is not an independent performance test.
Profoto
The RFi Softbox 2x3' is a rectangular 60 × 90 cm softbox for photographers with a compatible Profoto or other supported flash set-up.
- Profoto lists a recessed front and an optional softgrid for greater control over the spread of light.
- The RFi requires a separate RFi speedring. Profoto’s OCF range has its own limitations regarding the flash head and modelling light; don’t treat these ranges as interchangeable.
Joybuy products
Related products coming soon.
Frequently asked questions
Will a softbox prevent all reflections in the glass?
No. Move the lights while keeping the camera parallel to the print, and check the result in a test shot. The Photographing Artwork guide suggests safely removing the glass, if possible, or using cross-polarisation if reflections persist.
How do you position two lights for a flat print?
Start with one light on either side, at around 45° to the artwork. The guide from the New Mexico State Committee of the National Museum of Women in the Arts describes this positioning. Compare the lighting on both sides and move the lights if you see reflections in the glass.
Does a Bowens softbox come with a light?
Don’t assume it does: check separately whether the light source, stand and required mount are included with the model you’ve chosen. Profoto states that the RFi Softbox 2x3' requires a separate RFi speedring.
What should you check when buying an electric studio light in the Netherlands?
Check which rules apply to the specific light. EUR-Lex explains that the EU low-voltage rules apply to electrical equipment with a rated voltage of 50–1,000 V AC or 75–1,500 V DC; those limits don’t, by themselves, say anything about a passive fabric softbox.
Can you return a softbox bought online in the Netherlands if it doesn’t fit?
For a standard online consumer purchase, ACM ConsuWijzer states that you generally have a statutory 14-day cooling-off period after delivery. Check the terms and any exceptions that apply to your purchase.