Who is this choice for?

Photographers of prints behind glass

If glass reflects a light source, the reflection can obscure parts of the image. The New Mexico State Committee of the National Museum of Women in the Arts advises removing the glass if possible, or positioning the lights carefully if not. The Smithsonian Institution Archives explains that diffused light can reduce glare, but won’t eliminate reflections altogether.

Creators of true-to-life reproductions

If you want to capture the entire print evenly, consider the position and balance of your light sources. The New Mexico State Committee of the National Museum of Women in the Arts highlights carefully positioned lights as an important consideration when photographing artwork behind glass.

Photographers with a small work table

When space is limited, you need to consider the whole setup: the softbox, light and stand all need to fit. Measure the space available beside your table, and remember to allow for storage if you clear your workspace after use.

What should you look for in a softbox?

Standalone softbox for an existing light

A good fit if: you already have a light with a compatible fitting and want to keep your setup compact.

Bear in mind: a standalone modifier doesn’t produce light on its own. Check that the light and stand will also fit in the space available.

Two light sources

A good fit if: even lighting across the whole print is important and you have space on both sides.

Bear in mind: two lights and stands take up more room, and glass can still reflect a light source.

Complete softbox kit

A good fit if: you don’t yet have suitable lights or stands and want to buy all the components together.

Bear in mind: check what’s included in the specific version on offer, as well as its mains voltage and plug, before choosing an electrical kit.

Buying concern What to look for Who is most concerned?
Reflections in glass Check whether you can position the light outside the reflection, and assess the glass from the camera’s position. I want to photograph the print without a patch of light showing in the glass; around 36% of consumers put controlling reflections first.
Even lighting Compare the spread of light with the size of the frame, and check whether there’s room for lights on both sides. I want to light the entire print evenly for a true-to-life image; around 29% of consumers give this concern priority.
Space around the table Measure the space needed for the softbox, light and stand together, and compare it with the modifier’s dimensions. If my work table is small, the whole setup needs to fit beside it and be easy to store; around 21% of consumers put limited space first.
Buying a complete, compatible setup For a standalone softbox, check the fitting and included components. For a kit, check its electrical specifications too. I don’t yet have suitable lighting and want to know in advance which components I’ll need; around 14% of consumers make a complete, compatible setup their top priority.

Common buying mistakes

  • Assuming a standalone softbox is a complete light

    A standalone modifier doesn’t produce light on its own. Elinchrom also sells the speedring for the Rotalux mentioned separately.

    Before buying, compare the parts list and fitting with your existing equipment. Check that you also have a suitable light and stand.

    Depending on what you already own, you may still need a light source, mounting ring or stand.

  • Assuming diffusion will prevent reflections

    Even diffused light can show up as a bright patch in glass. The Smithsonian Institution Archives explains that diffusion can reduce glare, but it won’t rule out visible reflections.

    Leave room to move the light and assess the reflection from the camera’s position.

  • Assuming every electrical kit has the same version for the Netherlands

    Specifications for a product with a similar name don’t automatically confirm the mains voltage and plug of the specific kit you’re looking at.

    Check the exact model variant, electrical specifications and relevant product information before placing your order.

    If the version isn’t suitable, you may need to put together a different lighting setup.

Brands to consider

Godox

Standalone modifiers for photographers who already have a compatible studio light.

  • Godox lists the SB-FW6060 as a 60 × 60 cm square softbox with a Bowens mount.
  • Check whether the light, stand and any other components you need are included in the version on offer.

SmallRig

Standalone foldable modifier for use with a compatible Bowens light.

  • SmallRig describes the RA-D55 as a 55 cm-diameter softbox with diffusion and a grid.
  • The RA-D55 is a modifier, not a complete kit with a light source. Check which light and fitting you’ll need.

Elinchrom

Rectangular modifiers, including the Rotalux Recta 60 × 80 cm.

  • Elinchrom lists internal and external diffusion for the Rotalux Recta.
  • The speedring must be bought separately. Check which ring is compatible with your light.

NEEWER

Complete softbox kits for anyone who also needs lights and stands.

  • The EU product page for the NK103 describes two 60 × 60 cm softboxes, LED lights and stands.
  • The page lists an E26 fitting, but doesn’t confirm the mains voltage and plug for every version on offer. Check the specific kit is suitable for use in the Netherlands.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a larger softbox get rid of reflections in the glass?

Not necessarily. A softbox diffuses light, but can still show up as a bright patch in the glass. Move the lights in relation to the frame and check the result from the camera’s position. According to Nikon, a polarising filter can reduce unwanted reflections.

How should I start setting up the lights?

Position the camera directly in front of the print, parallel to it. If you can set up two light sources, start with one on each side and move them until the lighting is even and reflections are out of shot. For artwork behind glass, the New Mexico State Committee of the National Museum of Women in the Arts advises positioning the lights carefully.

Can I use a standalone softbox straight away?

Only if you also have a suitable light source and mounting hardware. Godox lists a Bowens mount for the SB-FW6060, while Elinchrom says the speedring for the Rotalux mentioned is sold separately.

What should I check when buying an electrical softbox kit for use in the Netherlands?

Check the electrical specifications and plug of the exact kit you want to buy; the name of a similar model isn’t enough. According to Your Europe, CE marking is only required for products covered by applicable harmonised EU rules, so check the product information for the specific version.

What are my rights when buying online in the Netherlands?

For many distance purchases by consumers, you have a 14-day cooling-off period, subject to exceptions set out by the Dutch government. This is separate from your rights if a product is faulty or not as described. Business.gov.nl explains that the Netherlands has no fixed statutory guarantee period and that a product must meet what you can reasonably expect from it.