Who is this set-up for?

Maker photographing shiny mugs

You want to control the reflection on the glaze without losing sight of the mug’s shape and details. Start by positioning the light modifier and using a white card; adding more lights isn’t automatically the answer. This approach is in line with advice from broncolor and Canon Europe.

Photographer with limited work space

You’re photographing on a small table and need room for a light, stand and camera, too. So compare the full set-up: a compact light source doesn’t necessarily mean the stand’s legs take up little space.

Maker with an existing light

You want to use a separate light modifier without buying a light unnecessarily. Check the mount and what’s included in the specific version; a Bowens softbox and a softbox for a speedlight don’t use the same fitting.

What should you look for?

Window light with a white card

Choose this when: the window provides enough light for the mug and you mainly want to brighten the shadow side.

Trade-off: you depend on daylight, so reassess reflections and white balance when the light changes.

Complete continuous-light kit

Choose this when: you don’t yet have a suitable light and want to see the effect as you set up. NEEWER describes the SF40 as a kit with a softbox, LED light and stand.

Trade-off: even a 40 × 40 cm softbox needs space for its stand beside the table; according to NEEWER, the SF40 has a fixed colour temperature of 5700 K.

Separate Bowens softbox

Choose this when: you already have a compatible Bowens light and support, and are looking for a separate light modifier.

Trade-off: models such as the Godox SB-FW6060 and SmallRig RA-D55 are light modifiers, not complete lighting kits; check the fitting and included accessories.

Softbox for a speedlight

Choose this when: you already use a compatible battery-powered flash with a tilting head.

Trade-off: according to Manfrotto, the Ezybox Hotshoe is designed for a speedlight; it isn’t a Bowens solution or a complete lighting kit.

When photographing glossy glaze, positioning the light source is a practical place to start: broncolor warns that simply adding more light isn’t necessarily the right solution, while Canon Europe recommends using a white card to brighten shadows.

Consideration What should you check? Who is this important for?
Reflections and shape Can you move the light source and use a white card if needed? Check the effect with a test shot. If you photograph glossy glaze, you’ll want to control the visible reflection without losing the mug’s shape. Around 33% of consumers prioritise this control over reflections.
Space for the set-up Measure the free space beside the table and compare it with the softbox dimensions, stand base and working height required. If your work space is cramped, you’ll need room for the light and stand as well as the camera. Around 27% of consumers prioritise the space taken up by the complete set-up.
Colour consistency Check whether the light has a fixed or adjustable colour temperature, and set the white balance to suit the lighting you’re using. When photographing a series of mugs, you’ll want to assess their glaze colour under similar lighting conditions. Around 20% of consumers prioritise consistent colour reproduction.
Fitting and kit contents Check that the mount is compatible with your light or flash, and whether a diffuser, grid and stand are included with the exact version. If you want to keep using your existing equipment, the light modifier must be compatible, and you’ll want to avoid buying duplicate accessories. Around 20% of consumers start by checking the fitting and kit contents.

Common mistakes

  • Assuming a separate softbox is a complete lighting kit

    A light modifier such as the Godox SB-FW6060 or SmallRig RA-D55 doesn’t automatically include the light and support you need to use it.

    Compare the contents of the exact version with the equipment you already own, and check the mount.

    If you don’t already have a compatible light or support, you may need to buy them separately.

  • Looking only at the size of the softbox

    The stand’s legs can limit space for your camera or movement around a small table, even if the light source itself fits.

    Map out the table, camera and stand base before choosing a size.

    If the support doesn’t fit your work space, you may need a different set-up.

  • Buying more lights to eliminate shine

    With a glossy surface, the position of the light source also determines which reflection is visible. So adding more lights doesn’t guarantee the result you want.

    First try changing the angle of the light and using a white card; broncolor and Canon Europe describe this approach for managing reflections and shadows.

    An extra light or kit may prove unnecessary if simply changing the light’s position is enough.

  • Assuming a fixed light colour guarantees accurate mug colours

    White balance and any mixed lighting can also affect how colours look in the photo.

    Take a reference shot under the same lighting conditions and check the white balance.

Brands to consider

These brands offer specific light modifiers and kits; models vary in their fittings, sizes and included accessories.

NEEWER

The manufacturer describes the SF40 as a compact complete kit for uses including product photography.

  • According to NEEWER, the kit includes a 40 × 40 cm softbox, a 35 W LED light and a stand.
  • The colour temperature is fixed at 5700 K. Also check that the stand fits around your table.

Godox

The SB-FW6060 is a separate rectangular softbox for a Bowens set-up.

  • Godox specifies a 60 × 60 cm size, a Bowens ring and a grid.
  • This is a light modifier; check separately whether you already have a compatible light and support.

SmallRig

The RA-D55 is a separate parabolic softbox for a compatible Bowens light.

  • SmallRig describes it as having a 55 cm diameter, diffusion fabrics and a grid.
  • The stated compatibility applies to suitable Bowens lights, not automatically to every compact light.

amaran

The Light Dome Mini SE is a separate Bowens light modifier which Aputure describes as suitable for use with amaran lights, among others.

  • According to Aputure, the model has a quick-fold design and an inner diffuser.
  • The control grid is sold separately; also check which light and support you already have.

Manfrotto

The Ezybox Hotshoe 38 × 38 cm is a light modifier for a compatible speedlight.

  • Manfrotto describes a bracket for a battery-powered flash with a tilting head.
  • This model isn’t a complete continuous-light kit; check that your flash fits the bracket.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a softbox as well as a window?

No, not always. If the window provides enough light, first try moving the mug and brightening the shadow side with a white card. Then decide whether you need separately controllable light for your photos.

How should I start positioning light for a shiny mug?

Take a test shot with one light source, change the angle of the light modifier and check the reflection on the glaze. A white card can brighten the darker side; adding more lights isn’t automatically the answer, as broncolor and Canon Europe also explain.

What should I consider when setting up and storing the equipment?

Check the space needed for the stand’s legs and cables, and see whether the manufacturer describes the light modifier as foldable. Keep the stand stable; NEEWER lists a weighted base as an option for its stand, but that doesn’t mean a sandbag is included with every kit.

What if the kit I bought online differs from its description, or I change my mind?

For online consumer purchases in the Netherlands, ACM ConsuWijzer states that you have up to 14 days after delivery to change your mind; legal exceptions may apply. If a product is faulty or doesn’t conform to its description, the seller is responsible for providing an appropriate solution under the statutory guarantee, as explained by the Netherlands Authority for Consumers and Markets.

Does an electric studio light need a CE marking?

Assess the light or power supply separately; a marking on the softbox fabric alone says nothing about the electrical equipment. EUR-Lex explains that the Low Voltage Directive applies to electrical equipment designed for 50–1.000 V AC or 75–1.500 V DC; whether it applies depends on the light or power supply.