Who is this setup for?

Student without a studio light

You want to film a repair in a small workspace and would rather know in advance whether the light, light modifier and tripod are all included in one kit. The NEEWER SF40 is one example of a kit whose manufacturer lists these components; do check the electrical specification.

Creator with an existing video light

You already have a continuous light source and mainly want to know whether the softbox will fit it and leave enough room for your camera, hands and components. The manufacturers state that the amaran Light Box 45x45 and Godox SB-FW6060 have a Bowens mount; check that it matches your light.

Creator who often sets up and packs away

You want to pack away the light modifier after filming and need a light that’s compatible with your chosen model. SmallRig describes the RA-D30 as foldable and suitable for certain RC 60/100 COB lights.

What should you consider when choosing?

Complete kit with light

A good fit if: you don’t yet have a suitable continuous light and want to consider the light, softbox and tripod together. The manufacturer lists a 40 × 40 cm softbox, a 35 W light and a tripod for the NEEWER SF40.

Bear in mind: according to the manufacturer, the version described has an E26 socket. Check the socket, mains supply, plug and applicable product requirements before choosing this version for use in the Netherlands.

Separate softbox for an existing light

A good fit if: you already have a suitable continuous light or are deliberately putting together a system from separate components. The amaran Light Box 45x45 and Godox SB-FW6060 are Bowens softboxes; amaran lists a diffuser and grid with the Light Box.

Bear in mind: the softbox is not a light source in itself. Check the mount, compatibility with your light and tripod, and whether it will fit beside your repair bench.

Small softbox for a specific SmallRig system

A good fit if: you use a compatible SmallRig RC 60/100 COB light and want a foldable light modifier. SmallRig lists an opening of approximately 29 cm and an included grid for the RA-D30.

Bear in mind: the manufacturer lists compatibility with the relevant SmallRig lights; don’t assume this softbox will fit any Bowens light.

What to consider What to look for Who should pay extra attention?
Space on and around the repair bench Compare the dimensions when set up and allow room for the tripod and camera. If you want to film without blocking your workspace with a light and tripod, the setup also needs to leave room for your hands; around 29% of consumers would make space their top priority.
Complete purchase and compatible components Check whether the light, diffuser and tripod are included, and whether the socket or mount is compatible. If you don’t yet have a video light, you’ll want to avoid missing essential components; around 29% of consumers would prioritise getting everything they need in one purchase.
Lighting small, shiny components Check the included diffuser and grid, the dimming function of the exact light model, and reflections in a test setup. If you want small components to remain clearly visible on camera, you’ll want to assess the light and adjust it if necessary; around 24% of consumers would make seeing the details their top priority.
Noise and packing away after filming Check that it folds away and how it attaches; if you’re filming spoken content, do a quick sound test. If you need to pack away the setup after filming or speak while recording, foldability and possible fan noise are worth considering; around 18% of consumers would prioritise noise and packing away.

Common mistakes

  • Assuming a separate softbox is a complete lighting kit

    The amaran, Godox and SmallRig models mentioned are light modifiers, not complete lighting kits. Without a compatible continuous light, they won’t provide any light for your recording.

    Check the contents and mount for each component. Bear in mind that a separate light modifier also requires a compatible light and may need a tripod.

    Separate components require extra compatibility checks and may mean you need to source the light or support separately.

  • Assuming an overseas kit will automatically work with Dutch mains power

    The SF40 version described by NEEWER has an E26 socket. This alone does not confirm that its electrical specification is suitable for use in the Netherlands.

    Before buying this exact version, have the socket, mains voltage, plug and applicable product requirements checked.

  • Assuming a lux figure applies with any softbox

    The light output figures listed by amaran and Godox relate to specific test conditions, including the use of a reflector and a particular measuring distance. They don’t automatically describe the same light with a different modifier.

    Only compare figures taken under the same test conditions, and assess the finished light-and-softbox setup in your workspace.

Brands to consider

amaran

The Light Box 45x45 is a compact Bowens light modifier; the COB 60x S is a separate continuous light.

  • According to amaran, the Light Box comes with a diffuser and grid.
  • amaran states that the COB 60x S is dimmable.
  • The Light Box is neither a light nor a tripod. The light output listed by amaran for the COB 60x S applies with the specified reflector, not automatically with a softbox.

Godox

The SB-FW6060 softbox and SL60IIBi light are separate products that you can assess as components of a setup.

  • Godox specifies a 60 × 60 cm size and a Bowens mount for the SB-FW6060.
  • According to Godox, the SL60IIBi is dimmable and adjustable from 2800–6500 K.
  • Check the space available and what’s included in the offer; the softbox and light are separate products.

SmallRig

The RA-D30 is a small foldable softbox for compatible SmallRig RC 60/100 COB lights, including the RC 60B.

  • SmallRig lists an opening of approximately 29 cm and an included grid.
  • This is not a universal softbox or a complete lighting kit. The sound figures given by SmallRig for the RC 60B are not independent measurements.

NEEWER

The SF40 is one example of a kit with a softbox, continuous LED light and tripod, as described by the manufacturer.

  • For the version reviewed, NEEWER lists a 40 × 40 cm softbox and a 35 W light.
  • According to NEEWER, this version has an E26 socket. Before buying, check the socket, mains supply, plug and applicable product requirements for use in the Netherlands.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can I use a separate softbox without another light?

No. The amaran, Godox and SmallRig softboxes mentioned are light modifiers. Pair one with a demonstrably compatible continuous light, and check the mount and what’s included in the packaging.

How can I stop the light getting in the way of the repair?

First, measure the space needed for the softbox, tripod, camera and your hands. Compare the dimensions when set up, then make a test recording to check that the components remain visible and reflections aren’t distracting.

Can I rely on the lux output once I attach a softbox?

Not unless the test setup is the same. The light output figures listed by Godox and amaran relate to conditions using a reflector; they don’t measure the same light with a different softbox.

What are my rights when buying online or if a light is faulty?

For online purchases from a business, you generally have a 14-day cooling-off period, according to the Dutch government. You’re also entitled to a product that works properly in the Netherlands; there is no general fixed statutory warranty period of two years. The seller must resolve problems with a faulty product in line with the applicable terms.

Is CE marking required for a light, and does it need to be tested?

Electrical products must meet the applicable product requirements. The NVWA states that CE marking is mandatory for electrical products, but testing is not required for this purpose. CE marking is not a general requirement for a passive fabric softbox on its own.