Who is this advice for?

Photographer with slow album uploads

Do you upload large photo albums to a shared workspace and want to find out first whether your internet connection or Wi-Fi is causing the delay? Consumentenbond recommends testing your speed using an Ethernet cable to assess your internet connection.

Home worker with a workspace further away

Do you upload from a room where distance or walls could affect reception? Consumentenbond points out that one or more additional Wi-Fi points can be an option for extending coverage.

Team sharing the network at the same time

Do you share the connection with colleagues and several devices? Check whether your devices support the Wi-Fi features offered by your router, and look into how security updates are managed.

What should you look for when choosing?

Check your connection and router position first

Choose this if: your upload speed over a wired connection is disappointing, or moving your current router could improve the signal in your workspace.

Bear in mind: upgrading your router won’t fix a limitation with your internet connection.

One standalone router

Choose this if: your upload speed over a wired connection is sufficient and a centrally positioned Wi-Fi point can reach your upload location.

Bear in mind: one router may not solve a range problem caused by distance or walls.

Mesh Wi-Fi with multiple points

Choose this if: you upload from different rooms and one central point isn’t enough.

Bear in mind: the extra points need to be positioned well and connected to each other; a wired connection between points may be an option.

What to consider What should you check? Who is this important for?
Upload speed and cause First, test using a wired connection, then compare the result with Wi-Fi at your upload location. Check that the WAN connection is suitable for your internet connection. If uploads are slow over a cable too, I want to find out first whether the internet connection is the bottleneck. Around 37% of the group are consumers who want to establish this first.
Coverage at your upload location Test the signal in the relevant room and try moving the router before deciding how many Wi-Fi points you need. I want Wi-Fi to reach the room where I upload albums, even if it’s further from the router. Around 27% of the group are consumers who prioritise coverage in that location.
Network use at the same time Check whether your devices support Wi-Fi 6 and whether a wired connection for your main upload computer would be useful. If several people are online at once, I want to know whether my devices are compatible with the router’s Wi-Fi features and connections. Around 18% of consumers see simultaneous use as their main concern.
Security and updates Check how the exact model receives updates, change the default login details and check the CE marking on the version being sold. I want to be able to maintain my own router without overlooking updates or secure login details. Around 18% of the group are consumers who prioritise simple, secure maintenance.

Common pitfalls

  • Mistaking the Wi-Fi speed on the box for upload speed

    The quoted Wi-Fi link speed doesn’t measure how quickly you can upload to your shared workspace. Without a wired comparison, you could mistake an internet connection problem for a Wi-Fi problem.

    Test using a wired connection first, then try Wi-Fi where you upload.

  • Buying a faster standalone router when coverage is the problem

    Distance and obstacles can weaken the Wi-Fi signal in your workspace. A faster model in the same unsuitable position may not solve the problem.

    First, try a better position, then compare one router with mesh Wi-Fi. If you choose mesh, also check whether you can connect the points using cables.

  • Judging an online listing by the model name alone

    A similar name won’t necessarily tell you which version or pack you’re buying, or which connections are included.

    Before buying, check the exact model, packaging, connections, update information and CE marking for the version being sold.

Brands to compare

TP-Link

The Archer AX55 is a standalone router, while the Deco X50 is a mesh system. These models are worth considering if you’re weighing up one Wi-Fi point against several.

  • According to TP-Link’s product specifications, the Archer AX55 supports Wi-Fi 6. For the Deco X50, the manufacturer lists optional Ethernet backhaul between Deco units.
  • These specifications don’t prove that coverage or upload speed will be better in every home. Also check how many units are included in the pack on offer.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router to compare if you also need wired connections and different operating modes.

  • ASUS lists four gigabit LAN ports and an access point mode for this model.
  • The specifications list different processors for V1 and V2. Check which version is being offered; quoted Wi-Fi data rates aren’t measured upload results.

FRITZ!

According to the manufacturer, the FRITZ!Box 4060 is a Wi-Fi 6 router that can be connected behind a modem.

  • FRITZ! lists a 2.5-gigabit WAN port, three gigabit LAN ports and mesh features for this model.
  • The telephony and smart home features listed may be more than you need if you only upload photo albums. Manufacturer information isn’t an independent performance test.

Joybuy products

These product picks are mesh Wi-Fi systems for upload locations in several rooms or a shared workspace.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7, white

A mesh system for upload locations spread across different areas. The product name lists Wi-Fi 7 (802.11be), dual-band and 2.4 and 5 GHz bands.

Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

A mesh set for upload locations in several rooms. The product name lists three units, tri-band (2.4, 5 and 6 GHz) and Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

A mesh system to consider if you need Wi-Fi in several places. The product name lists tri-band (2.4, 5 and 6 GHz) and Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco X50-PoE 3-pack dual-band Wi-Fi 6 with two Ethernet ports

TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6

A mesh set for coverage in several areas. The product name lists three units, dual-band Wi-Fi 6 (802.11ax), PoE and two Ethernet ports.

Joybuy
TP-Link Deco X50 2-pack dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

A mesh set for upload locations in several areas. The product name lists two units, dual-band Wi-Fi 6 (802.11ax) and the 2.4 and 5 GHz bands.

Joybuy

Frequently asked questions

Should I buy a new router straight away if my album uploads are slow?

No. First, test using a wired connection and compare the result with Wi-Fi at your upload location. If the wired connection is already slow, investigate your internet connection first or contact your provider. Don’t choose a router based only on its quoted Wi-Fi speed.

Can I use my own router with an internet connection in the Netherlands?

According to ACM ConsuWijzer, you can generally choose your own router, but exceptions and connection requirements may apply. Ask your provider which settings and connections you need, especially if you’re also replacing a modem.

How can I keep my own router secure?

Install security updates, enable automatic updates if they’re available for your model, and replace the default login details with strong ones. VeiligInternetten recommends keeping routers up to date; check how the version you choose receives updates.

What warranty applies when buying in the Netherlands?

In addition to any manufacturer’s warranty, you have a legal right to a product that does what you can reasonably expect it to do. ACM ConsuWijzer explains that the seller is responsible for providing an appropriate solution for a fault covered by these rights; this doesn’t mean there’s a fixed warranty period for every router.

What compliance should I check for a Wi-Fi router?

Check that the exact version has the correct CE marking. The Rijksinspectie Digitale Infrastructuur states that this marking is mandatory for equipment covered by the requirement. The RDI also describes RED 3.3 cybersecurity requirements, which have applied to certain connected radio equipment since 1 August 2025. Don’t assume they apply based on the product name alone.