Who is this advice for?

Designer with a distant home office

Your connection is particularly poor at your desk, and you need to send large design files. The Consumentenbond points out that both the position of a Wi-Fi access point and the connection between access points matter.

Home worker with slow uploads

Before replacing your networking equipment, you want to check whether Wi-Fi or your internet package is the bottleneck. The Consumentenbond recommends carrying out a wired test next to the modem.

Homeowner who can run a cable

You can run a cable towards your home office and want to weigh up whether a wired access point or Ethernet backhaul is right for you. TP-Link explains that Ethernet backhaul is for Deco units that are actually connected by cable.

What should you consider when choosing?

Measure your upload speed using a wired connection next to the modem, then compare it with a test at your desk. This will help you work out whether your Wi-Fi, cabling or internet connection needs attention.

Keep your existing router

A good fit when: uploads are also slow right next to the modem, or adjusting the settings and moving the router have already improved the connection.

Trade-off: this won’t automatically solve a shortfall in your package’s speed or a persistent coverage problem.

Wired access point or mesh backhaul

A good fit when: you can run an Ethernet cable to, or closer to, your home office.

Trade-off: you’ll need a suitable cable, port and configuration.

Wireless mesh

A good fit when: running cables isn’t practical and you can place an extra unit somewhere it can still get a usable connection to the rest of the network.

Trade-off: placement, obstacles, power consumption and the cost of extra units are all factors to consider.

Powerline with Wi-Fi

A good fit when: running a cable is difficult and it’s hard to establish a wireless connection between units.

Trade-off: performance over your home’s electrical wiring varies, so you’ll need to test it in practice.

Replace your router

A good fit when: you’ve established that the existing router itself is underperforming and the new connection method is compatible with your provider.

Trade-off: replacing the router alone won’t automatically bring the Wi-Fi signal closer to your home office.

Concern What should you look for? Who is this important to?
Coverage in the home office Test the connection at your desk and see whether you can place a mesh unit somewhere in between. If my desk is a long way from the router, I want enough coverage there to send design files; around 36% of consumers put desk coverage at the top of their list when buying.
Upload speed Compare a wired test next to the modem with Wi-Fi in your home office; also check the upload speed included in your package. I want to know whether my internet connection or Wi-Fi is limiting my uploads before replacing equipment; around 29% of consumers put upload speed first.
Connection between the units Check whether you have an Ethernet cable and suitable ports; also consider whether powerline is right for your situation. If I can run a cable, I want to know whether it provides a suitable route to my home office; around 21% of consumers make the connection route their top priority.
Cost and management Compare the number of units included and their power consumption; check for updates and the terms of any additional services. I want to understand in advance how many units I’ll need and what management tasks or services come with them; around 14% of consumers focus mainly on cost and management.

Pitfalls to avoid when buying

  • Confusing advertised Wi-Fi speed with upload speed

    Wi-Fi and the upload speed of your internet connection are two different parts of the connection. A faster router won’t increase the capacity of your package.

    Start with a wired test next to the modem, then compare the result with a test in your home office.

  • Placing a mesh unit in a dead zone

    An extra unit still needs a usable connection to the rest of the network.

    Try placing it somewhere in between with fewer obstacles, then check the connection at your desk.

  • Not checking what’s included or the extra services

    The number of units included and the terms of any additional services can vary between versions. NETGEAR says the Orbi RBK763S includes one year of Armor; check which features are available afterwards and what terms apply.

    Before buying, check the exact package, version and terms of any services.

  • Assuming powerline works the same in every home

    Powerline uses your electrical wiring, but the advertised speed doesn’t tell you how well it will work in your home. If the results are disappointing, you may still need to use a different way to connect.

    Test the connection where you want to upload files and, if possible, compare it with Wi-Fi or an Ethernet cable.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option for extending Wi-Fi coverage around your home.

  • TP-Link says Ethernet backhaul can be used with Deco units that are actually connected by cable.
  • The wired connection only applies to the links connected by cable; check the version and package size too.

ASUS

ASUS describes the ZenWiFi BT8 as a Wi-Fi 7 mesh option with wired backhaul capabilities.

  • ASUS lists two 2.5-gigabit ports and a 6GHz band for the BT8.
  • These manufacturer specifications don’t measure upload performance in your home office; check the version and the number of units included.

FRITZ!

FRITZ! describes the Mesh Set 2700 as a two-piece expansion set for use with an existing router or a compatible fibre modem/ONT.

  • FRITZ! lists automatic updates and a five-year manufacturer’s warranty for this set.
  • The set isn’t necessarily a replacement modem; check the connection method with your provider.

devolo

With Magic 2 WiFi 6 next, devolo combines Wi-Fi with a connection over your home’s electrical wiring.

  • The manufacturer describes mesh networking and data transmission over the electricity network.
  • The stated speeds don’t measure the performance of your electrical wiring or internet connection.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 mesh set with a router and two satellites.

  • A set with multiple units is worth considering if you want to cover more than one area of your home.
  • NETGEAR says this model includes one year of Armor; check which features are available afterwards and what terms apply.

Joybuy products

This Joybuy selection features TP-Link mesh sets for extending Wi-Fi around your home, with a choice of models and pack sizes. The Rijksinspectie Digitale Infrastructuur says that equipment such as Wi-Fi routers must carry the required CE marking; before buying, check the marking and conformity information for the specific version.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68, 2-pack

A good fit if you want to extend Wi-Fi to a distant home office with a two-unit mesh set.

Joybuy
TP-Link AX1800 Wi-Fi 6 mesh system, 2-pack

TP-Link AX1800 Wi-Fi 6 mesh system, 2-pack

A two-unit mesh set for extending Wi-Fi around your home if the connection in your home office is weak.

Joybuy
TP-Link Deco X50 Wi-Fi 6 dual-band mesh set, 3-pack, 2.4 GHz and 5 GHz

TP-Link Deco X50 Wi-Fi 6 dual-band mesh set, 3-pack (2.4 GHz/5 GHz)

The three-unit set is a good fit if you want to extend your mesh network to several areas of your home.

Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 dual-band mesh set, 2-pack, 2.4 GHz and 5 GHz

TP-Link Deco X50-PoE Wi-Fi 6 dual-band mesh set, 2-pack (2.4 GHz/5 GHz)

A good fit if you can run an Ethernet cable to a mesh unit; PoE requires a suitable Ethernet connection and PoE power supply.

Joybuy
TP-Link Deco XE75 Pro Wi-Fi 6E tri-band mesh set, 3-pack, 2.4 GHz, 5 GHz and 6 GHz

TP-Link Deco XE75 Pro Wi-Fi 6E tri-band mesh set, 3-pack (2.4 GHz/5 GHz/6 GHz)

A three-unit set for extending Wi-Fi to several areas of your home.

Joybuy

Frequently asked questions

Can a new Wi-Fi router help me upload design files faster?

Only if your home network is the bottleneck. First compare a wired upload test next to the modem with the connection in your home office; your internet connection and the upload speed in your package remain separate limitations.

Where should I place an extra mesh unit?

Don’t put it right where the existing signal has almost disappeared. Instead, try a spot in between with as few obstacles as possible. Then check the connection in your home office. TP-Link says Ethernet backhaul can be used between Deco units connected by cable.

Can I use my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. To connect directly to your provider’s network, the device must meet the applicable safety requirements; ask your provider for the settings you need, and don’t confuse a standalone router with a compatible modem.

Does a Wi-Fi router in the Netherlands need a CE marking?

Yes. The Rijksinspectie Digitale Infrastructuur says that equipment such as Wi-Fi routers must carry the CE marking. Check the marking and conformity information for the specific version.

What warranty applies if my router breaks down too soon?

According to ACM ConsuWijzer, you have a statutory guarantee from the seller in addition to any manufacturer’s warranty. It doesn’t automatically last two years for every router; what you could reasonably expect from the product and the circumstances of the fault are both relevant.