Which scanning option is right for you?

Slide owners short on space

If you want to scan loose slides at home without leaving a large set-up permanently in place, remember to allow room to operate the holder too. The Consumentenbond (Dutch Consumers’ Association) lists the amount of material you have and the time you want to spend on it as factors to consider.

Owners of full slide magazines

If you have lots of mounted slides, first check whether your magazine is compatible with the scanner. reflecta lists Universal, CS and LKM magazines as compatible with the DigitDia evolution.

Anyone safeguarding important 35mm images

If you want to review and correct your scans, a computer-based workflow may be a good choice, but be sure to set aside time for it. The Consumentenbond lists image quality and the time involved as factors when choosing a scanning method.

What should you look for when choosing?

First, check the format and packaging of your slides. Then measure the space needed for the scanner and to operate it, before deciding how much manual feeding and computer use will suit your collection.

What to consider What should you check? Who is this important for?
Storage and workspace Measure the available shelf and work surface, allowing room for the holder, cables and controls. If space is limited, I also want room to load and operate the holder. Around 36% of consumers put storage and workspace first.
Feeding lots of slides Count your slides and check whether they’re loose or fit into a magazine supported by the scanner. With a large collection, I want to move individual slides or holders less often. Around 29% of consumers give reducing manual feeding the highest priority.
Image review and editing Check the optical and interpolated resolutions, and find out what software and computer support are required. If detail in my 35mm images matters, I want to be able to review scans and correct them if needed. Around 21% of consumers put image review first.
Compatibility with your originals Compare the film format and the dimensions and thickness of your mounts with the holders supplied with the exact model. If I have other originals or unusual mounts as well as slides, I want to know whether they’ll fit the supplied holders. Around 14% of consumers make format compatibility their first consideration.

Common pitfalls

  • Mistaking a high output resolution for the sensor resolution

    Kodak Photo Plus distinguishes between its 13 MP sensor and output of up to 22 MP. reflecta also gives separate standard and interpolated output resolutions for the x33-Scan.

    Compare how the figures are measured and, if possible, look at a test scan of your own material. An interpolated output figure doesn’t mean that extra detail was actually captured on the film.

    Larger output files can require more storage and time to review, without proving that they contain extra image detail.

  • Assuming every mount or magazine will fit

    reflecta gives a maximum mount thickness of 3.2 mm for the x33-Scan. According to reflecta, the DigitDia evolution is compatible with Universal, CS and LKM magazines.

    Before choosing a scanner, compare your mounts, their thickness and the magazine markings with the documentation for the exact model.

    If your slides don’t fit, you may need to transfer them manually or find a different compatible holder.

  • Measuring only the scanner itself

    The space you need also depends on how slides are fed into the scanner and whether you need room for a holder, magazine or computer. Epson lists the Perfection V600 Photo as measuring 280 × 485 × 118 mm.

    Measure the work surface you’ll need while scanning, as well as the space where you plan to store the scanner afterwards.

    Your work area may be too cramped for the holder, magazine or computer you need while scanning.

  • Assuming a scan automatically gives you a safely stored archive

    Kodak Photo Plus says that the Slide N Scan Max requires an SD card, but one isn’t included. The Library of Congress distinguishes between creating digital files and preserving them.

    Open a few test files on a computer, check that the images are there, then make a separate copy on your own storage.

    Allow for a compatible memory card, storage space and time to check and preserve your files.

Brands to consider

reflecta

reflecta offers several scanning options, including the standalone x33-Scan with individual slide holders and the DigitDia evolution for compatible magazines.

  • According to reflecta, the x33-Scan saves JPEG files to an SD card and doesn’t need a computer while scanning. It supports mounted 35mm slides up to 3.2 mm thick.
  • reflecta lists Universal, CS and LKM magazines as compatible with the DigitDia evolution.
  • This magazine compatibility doesn’t automatically apply to other types. The specifications listed are not independent measurements of scanning speed or image quality.

Plustek

The OpticFilm 8200i SE is a dedicated 35mm film and slide scanner designed for use with a computer.

  • Plustek specifies an optical resolution of 7200 dpi, an infrared channel and SilverFast SE Plus for this model.
  • These model specifications don’t confirm compatibility with other film formats. Check that the software works with the computer and operating system you plan to use.

Kodak Photo Plus

The EU version of the Slide N Scan Max is a standalone scanner with a screen, supporting the slide and negative formats listed by the retailer.

  • The EU product information lists a 13 MP sensor, output of up to 22 MP, adapters for 135, 110 and 126, and storage on SD or SDHC.
  • The retailer says an SD card is required but not included. Output of up to 22 MP is not the same as a 22 MP sensor resolution.

Epson

The Perfection V600 Photo is a flatbed option for anyone who also wants to scan other originals and has enough workspace.

  • Epson Netherlands specifies holders for four mounted 35mm slides and for 120/220 film. The listed dimensions are 280 × 485 × 118 mm.
  • Epson Netherlands has marked the Perfection V600 Photo as discontinued. This product information doesn’t confirm that a new unit is available.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I sort and clean my slides first?

Sort your slides by format and packaging first, so you can choose the right holder or magazine. Then check them carefully for dust and make some test scans; dust and marks can show up in digital images. Don’t assume that general cleaning advice for paper photographs is also suitable for film.

Do I need a computer or memory card for a standalone scanner?

According to reflecta, the x33-Scan doesn’t need a computer while scanning and saves JPEG files to an SD card. Kodak Photo Plus says that the Slide N Scan Max requires an SD card, but one isn’t included. You’ll also need a way to open, check and store your files afterwards.

What should I check about the warranty and buying online?

Check which accessories and software are included with the specific offer, and what terms and conditions apply to the purchase. According to the Government of the Netherlands, there’s no fixed statutory warranty period in the Netherlands; if a product is faulty, the seller must provide a solution. For many standard online purchases from a business, you have a 14-day cooling-off period, subject to applicable terms and exceptions.

Can I share scans of someone else’s slides online?

Not automatically. According to the Government of the Netherlands, you can make a private copy of someone else’s copyright-protected photographs for personal use, but you can’t share or publish them without permission. Check the rights to the images before publishing them.