A scanner without a permanent home
You want to digitise holiday slides on a small table, then store the device in a limited amount of cupboard or shelf space. Both the scanner’s dimensions and the space needed for its holders matter.
If you want to digitise framed holiday slides without setting up a permanent computer station, start by looking at a compact standalone scanner that saves to an SD card. Before you choose, check the format and thickness of your slides, as well as how much space the scanner needs with its holders and cables when in use. If you want more extensive editing options, a computer-connected film scanner may be a better fit.
You want to digitise holiday slides on a small table, then store the device in a limited amount of cupboard or shelf space. Both the scanner’s dimensions and the space needed for its holders matter.
You want to view slides on the device and save them to a memory card, without having to set up a computer and scanning software first.
You want more control over the settings or editing of selected 35mm holiday slides, and are happy to use a computer setup. If you only have one collection, you could also consider paying a service to digitise it for you.
Start with the space you have available for scanning and storage. Then check whether the holder fits your slides, and decide between saving directly to a memory card and working with a computer.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Storage and setup | Compare the exact model’s dimensions with your shelf, and measure the space you’ll need for holders and cables while working. Technaxx lists the DigiScan DS-02 as measuring 8,8 × 8,6 × 11 cm. | If I have limited shelf and table space, I want to know how much room the scanner and holders will take up. Around 36% of consumers rank storage space as their top buying priority. |
| Scanning without a computer | Check which film types are supported, whether the holder is suitable and how files are saved. Reflecta lists SD storage and support for framed slides up to 3,2 mm thick for the x22-Scan. | I want to view and save slides directly without a computer, even if another model might be smaller. Around 29% of consumers prioritise scanning without a computer. |
| Settings and editing | Compare the optical or sensor resolution with the interpolated output, and check that the software is compatible with your computer. Plustek specifies an optical resolution of 7200 dpi for the OpticFilm 8100. | If I want to adjust the settings or edit selected 35mm slides, I’m happy to use a computer setup. Around 21% of consumers prioritise these scanning settings. |
| A one-off collection | Think about how many slides you want to digitise, then compare the work and equipment involved in scanning them yourself with the process offered by a service provider. | For a one-off collection, I don’t want to have to store a scanner once the job is done. Around 14% of consumers prioritise avoiding the need to own a device. |
A higher output setting achieved through interpolation is not the same as having a sensor with that number of megapixels. Kodak lists a 14 MP sensor and 22 MP interpolated output for the Slide N Scan described here; Technaxx lists 5 MP and 10M interpolated output for the DS-02.
First compare the original sensor or optical specification, then look at the available output setting.
According to reflecta, the x22-Scan supports framed slides with mounts up to 3,2 mm thick. Other models or holders may have different requirements.
Measure a few representative mounts and compare them with the holder specifications for the exact model.
If your mounts don’t fit, you may need a different compatible scanner or a scanning service.
The space you need when using the scanner may be greater than the scanner itself, especially if you need to use holders and cables.
Measure both the storage space and the table space available while you’re loading slides.
Epson lists the Perfection V600 Photo as discontinued on its Dutch product page. So although the model is described as having a film-scanning function, that doesn’t mean it’s available to buy new.
If you’re considering an existing or second-hand model, check that it comes with all its film holders and that the software is compatible with your computer.
The DigiScan DS-02 is a compact standalone model for slides and negatives.
The x22-Scan and x33-Scan offer a standalone SD-card workflow for framed 35mm slides.
The Slide N Scan with a 5-inch screen may suit the listed slide formats and film types.
The DF-S 310 SE is a standalone model for slides and negatives. According to Rollei, it comes with inserts for Pocketfilm and Super 8.
The OpticFilm 8100 is a computer-connected option for anyone who wants to process 35mm slides using scanning software.
The Perfection V600 Photo is a flatbed option to consider if you already have a suitable one or are looking at a second-hand model.
Yes. Compare the film format, the outer dimensions of the mount and, where necessary, the mount thickness with the holder for the exact model. Reflecta specifies support for framed slides up to 3,2 mm thick for the x22-Scan; Kodak lists 50 × 50 mm slides among the film types supported by the Slide N Scan described here.
Not always for capturing images: the reflecta x22-Scan saves JPEG files directly to an SD card. Check the power requirements for the exact model. Kodak lists SD support up to 32 GB for the Slide N Scan described here, and says a 5V/1A mains adapter is not included.
Start with a few test scans and check the framing and any visible dust before processing a whole collection. Kodak lists a cleaning brush as included with the model described here. After scanning, also save the files somewhere else: a memory card on its own isn’t a second copy.
For a one-off collection, using a service could be a good option if you don’t want to store a scanner afterwards. Beforehand, agree how many slides there are, which file format you want and how the originals will be returned.
According to the Dutch government, you’re entitled to a product that works as it should. The Netherlands has no fixed statutory warranty period; what you can expect depends, among other things, on the product and the information provided at the time of purchase. If there’s a fault, contact the seller. A manufacturer’s warranty doesn’t replace these statutory rights.