Who is this advice for?

People sharing a computer

You want to digitise holiday slides and find out in advance whether you’ll need scanning software on the shared computer, and where the files will be saved. Plustek, reflecta and Rollei describe different scanning and saving methods.

Family archive custodians

You want to assess important 35mm slides carefully and may value control over the scanning process more than a quick, simple workflow. The Consumentenbond distinguishes film scanners from more basic slide scanners.

People scanning large slide collections

You have lots of mounted slides and want to spend less time changing them one by one. The Consumentenbond discusses the volume of material as a factor when choosing a scanner, while reflecta describes batch processing for supported magazine types.

What should you look for?

First, decide whether you’ll have access to the shared computer while scanning. Then check that the scanner is suitable for your slides and the amount of work you’re prepared to do yourself.

What to consider What to check before buying Who will find this important?
Using a shared computer Check whether the model saves directly to SD/SDHC or requires computer software. Also check the system requirements and agree where scans will be stored. If I share a computer with others, I want to know whether I’ll need access to it while scanning and where the files will end up. Around 29% of consumers prioritise a shared-computer workflow.
Detail and restoration options Compare the scan settings and any infrared correction available on the exact model. The resolution figure alone doesn’t tell you what a scan will look like in practice. If I want to enlarge slides or edit them carefully, I’m mainly looking for control over the scan and any available corrections. Around 24% of consumers prioritise image detail and restoration options.
Time needed for a large collection Check whether your existing slide magazines are supported and what resolution the stated scanning time applies to. With a large collection of mounted slides, I want to avoid changing every frame by hand as much as possible. Around 18% of consumers prioritise processing lots of slides.
Compatible slide formats and holders Compare the formats of your slides, film and magazines with those supported by the exact model and its included holders. With a mixed collection, I want to know in advance whether my formats and mounts will fit. Around 12% of consumers make format and holder compatibility their main concern.
What you’ll need and the time involved Check whether software, a memory card and the required holders are included. Also allow time to transfer and organise your files. If I’m digitising slides myself, I want to know which parts and preparation are needed, and how much work transferring the files will involve. Around 17% of consumers prioritise the necessary equipment and time required.

Common pitfalls

  • Assuming a higher megapixel count means a better scan

    Rollei lists 14 MP for the DF-S 310 SE, with interpolation up to 24 MP. The Consumentenbond distinguishes between basic slide scanners and good film scanners; an interpolated figure on its own doesn’t prove that more detail has been captured.

    Start by deciding what kind of scanning process you want, then consider the output and settings you need. Don’t treat an interpolated megapixel count as extra detail captured directly.

    If the results don’t meet your needs, scanning again could take extra time.

  • Confusing an automatic slide-magazine scanner with a computer-free scanner

    The reflecta DigitDia 8000 processes supported slide magazines, but reflecta also describes operation using computer software.

    Check separately whether slides are fed automatically and whether images can be saved without a computer. Also check the software and system requirements.

    Preparing the computer and installing software could take extra time.

  • Treating a discontinued flatbed model like a regular new purchase

    Epson lists the Perfection V600 Photo as discontinued. Its film holders and software are relevant when scanning slides with this model.

    If you’re considering old stock or a second-hand model, check its condition, the included holders and compatibility before choosing it.

    Missing holders or compatible software could mean extra preparation.

Brands to consider

Plustek

The OpticFilm 8300i SE is designed for scanning individual 35mm slides and negatives using computer software.

  • Plustek lists a hardware resolution of 7200 dpi, an infrared channel and SilverFast SE Plus 9.
  • Check the system requirements and bear in mind that the stated scanning time varies when using infrared.

reflecta

The DigitDia 8000 is designed for mounted slides in supported magazines, with a computer forming part of the scanning process.

  • reflecta lists CS, Universal DIN 108, LKM and Paximat magazines, among others, as well as CyberViewX software.
  • The stated scanning time of around 100 seconds per slide applies at 5000 dpi. Check that your magazine is supported.

Rollei

The DF-S 310 SE is an option for scanning slides and negatives, with files saved to a memory card first.

  • According to Rollei, the model can save directly to SD/SDHC and can also be used via USB.
  • Rollei lists a maximum card capacity of 32 GB. The stated 14 MP and interpolation up to 24 MP don’t automatically mean more visible detail.

Kodak

The Slide N Scan version with a 5-inch screen is designed for the slide and film formats listed for that version, with storage on SD/SDHC.

  • The Kodak Photo Plus product page lists a 14 MP scanner and holders for 135, 110 and 126 film.
  • Check the exact version: specifications for another Slide N Scan model, including a version with a 7-inch screen, don’t automatically apply to this one.

Epson

The Perfection V600 Photo is a flatbed scanner with a slide holder. It may be worth considering if you also want to scan other originals.

  • Epson specifies a holder for four mounted 35mm slides and USB 2.0.
  • Epson Netherlands lists the V600 as discontinued and no longer available through its product page. Assess old-stock and second-hand models individually.

Slide scanners on Joybuy

Related products coming soon.

Frequently asked questions

Can I scan slides without using the shared computer while scanning?

Yes, with a model that saves directly to a memory card, such as the DF-S 310 SE, according to Rollei. reflecta describes the DigitDia 8000 as operating via computer software: in this case, ‘automatic’ refers to magazine processing, not computer-free use.

What should I check before installing scanning software on the computer?

Compare the operating system, required free disk space and memory with the requirements for your chosen model. Plustek and reflecta have different requirements. Also agree on the installation and storage location with the person who manages the shared computer.

How can I avoid extra work when dealing with dust, colour correction and storing scans?

Allow time to check your originals and scans, edit colours if needed and save files with clear names. The Consumentenbond notes that removing dust, correcting colours and storing files can all be time-consuming parts of digitising slides yourself. Infrared correction on some models doesn’t remove the need to check your scans.

What are my rights when buying a scanner online in the Netherlands?

According to the Netherlands Authority for Consumers and Markets (ACM), online purchases usually come with a 14-day cooling-off period. You also have a statutory warranty, in addition to any seller’s or manufacturer’s warranty. The terms and how they apply depend on the circumstances.

Where can I dispose of an old scanner in the Netherlands?

According to the Dutch Government, when you buy a new appliance as a private individual, you can return an old, similar electrical appliance through the retailer. The old-for-new scheme also applies to online purchases, but the Dutch Government says it doesn’t cover business equipment. Collection points and local council services are other options.