For bound or delicate sketchbooks, an overhead scanner is an obvious choice if the pages cannot be opened flat safely. Check, though, that the scanning area and image correction suit your drawings. A book-edge scanner or flatbed scanner may be more suitable for pages that can safely lie on glass, while a document camera may be designed for loose, flat sheets. Test colour and detail with a sample scan, and arrange permission to share separately from your choice of scanner.
Who is this guide for?
People responsible for bound sketchbooks
You want to record work by several group members without pressing delicate bindings flat. The Library of Congress stresses the importance of considering the condition of originals, suitable equipment and an appropriate workspace in advance.
People responsible for an image archive
You want to capture colours, lines and page edges clearly, so you pay attention to sample scans, output formats and the size of the originals. Metamorfoze’s guidelines cover aspects of image quality including colour, white balance and lighting.
Volunteers at a shared scanning station
You want to scan successive pages using software that works on the available computer, and agree in advance who is allowed to receive the scans.
What should you look for?
Overhead scanner for bound books
Suitable when: a book must not be opened wide or its pages are difficult to lay flat. CZUR describes contactless capture and curvature correction for its ET series; IRIS describes this correction for the Desk 6 Pro.
Bear in mind: correction software does not guarantee faithful reproduction of colours and fine lines in drawings; assess a sample scan.
Book-edge scanner
Suitable when: a page can safely lie on glass and the group wants to scan close to the spine. Plustek describes the OpticBook A300 Plus as having a book-edge design.
Bear in mind: you need to reposition each page; check whether this can be done safely with delicate books.
Flatbed scanner
Suitable when: you mainly scan loose sheets or books that can safely lie flat. Canon lists a maximum scanning area of 216 × 297 mm for the CanoScan LiDE 400.
Bear in mind: a larger page or spread will not fit in a single scan on this A4 scanning area; a Z-lid does not automatically make it safe to lay a delicate binding flat.
Document camera for loose sheets
Suitable when: the drawings are already loose and flat. CZUR positions the Shine 800 A3 Pro for individual flat pages up to A3.
Bear in mind: this is not the same as a scanner for bound books with curvature correction.
| What to consider | What should you check? | Who is this important for? |
| Binding and fragility |
Check the book support, maximum book thickness and image quality close to the spine using a representative book. |
If I don’t want to force the spine, I’m looking for a method that doesn’t require the book to lie flat. Around 36% of consumers put protecting the binding first. |
| Colour and fine detail |
Compare light pencil lines, dark areas and colours; also check corners, glare and the exported file. |
If lines and colour need to remain useful later, I want to see what a sample scan looks like first. Around 29% of consumers give image fidelity top priority. |
| Page or spread size |
Measure the width and height of the largest original that needs to fit in a single scan, then compare these measurements with the scanning area. |
If a large drawing needs to fit fully in one image, I look at the usable scanning area. Around 21% of consumers put page size first. |
| Workflow and computer |
Check the operating system, storage space, output formats, and file-naming and storage arrangements. |
If several volunteers use the same scanning station, I want the software and files to suit our computer and workflow. Around 14% of consumers give the shared workflow top priority. |
Common buying mistakes
-
Mistaking a scanner for loose A3 sheets for a scanner for bound books
A model designed for flat sheets does not automatically offer the book support or curvature correction needed for a bound sketchbook. CZUR distinguishes the Shine 800 A3 Pro, designed for flat pages, from its ET models, designed for books.
Check that the specific model’s features match the type of original you want to scan.
An unsuitable workflow may mean more manual editing.
-
Assuming A3 size or a high dpi figure guarantees a good reproduction
Size and resolution alone do not tell you how white balance, lighting and colour accuracy will look in a drawing. Metamorfoze addresses these image aspects separately in its preservation imaging guidelines.
Measure the original and assess a representative sample scan in the output format your group plans to use.
Less usable scans may mean rescanning or extra image correction.
-
Assuming that owning a sketchbook gives you permission to share the work
The artist may hold copyright in the drawings; scanning and sharing are separate matters.
Before sharing, agree with the rights holders what uses are permitted. The Dutch government distinguishes between a private copy for personal use and distribution.
Brands to compare
CZUR
The ET series is worth considering for bound books, while the Shine 800 A3 Pro is designed for loose, flat sheets.
- CZUR describes contactless capture and curvature correction for its ET series.
- Use a sample scan to assess whether the colour, edge sharpness and correction suit your drawings. Don’t assume that features of the ET series are available on the Shine 800 A3 Pro.
IRIS
The IRIScan Desk 6 Pro is an overhead option for A3 books and documents at a shared scanning station.
- IRIS lists a 13-megapixel camera, A3 capture and various output formats; the manufacturer also describes curvature correction.
- These product specifications and manufacturer descriptions are not an independent assessment of colour reproduction.
Plustek
The OpticBook A300 Plus is a book-edge scanner to consider when pages can safely lie on glass.
- Plustek describes a book-edge design and software for automatic cropping and rotation.
- With delicate originals, you still need to position each page safely.
Canon
The CanoScan LiDE 400 is a flatbed option for loose pages or pages that can safely lie flat.
- Canon lists a scanning area of 216 × 297 mm and a Z-lid.
- The maximum scanning area is A4; the lid does not guarantee that a delicate sketchbook can safely lie flat.
Joybuy picks for loose sheets
This product selection is for loose, flat drawings up to A3, not for bound sketchbooks.
No image available
CZUR Shine 800 A3 Pro
Designed for loose, flat sheets up to A3; not for bound sketchbooks.
The product information mentions OCR and automatic cropping. The product title lists compatibility with Windows and macOS; the product description mentions USB and a foot pedal.
View at Joybuy
Frequently asked questions
How can we get started without damaging delicate sketchbooks?
First check whether each book can be safely opened and its pages turned, then choose suitable equipment and a suitable workspace. The Library of Congress recommends considering the condition of originals, appropriate equipment and training beforehand; this is conservation advice, not a legal scanning requirement in the Netherlands.
Is a searchable PDF enough to preserve drawings?
No. Also check the image file and whether the lines and colours remain visible. Plustek and IRIS list searchable PDFs as an output option, while Metamorfoze links image quality to aspects including colour, white balance and lighting.
What should we check before installation and for ongoing support?
Check the software requirements against your group’s computer and make a note of which software version you use. CZUR publishes separate downloads and system requirements for Windows, Mac and Linux for the ET24 Pro; this does not apply to other models or guarantee future support.
Can we share scans of group members’ work with each other or online?
Not automatically. According to the Dutch government, creators hold copyright in their drawings, so before using or sharing someone else’s protected work, the group needs to check what permission or applicable exception applies. A private copy for personal use does not give you general permission to share a group archive.
What if a page includes names or other personal data?
Before collecting and sharing it, check which GDPR lawful basis applies to that processing. The Dutch Data Protection Authority lists consent as one of six possible lawful bases; which basis applies to your project depends on the specific processing involved.