Who are these pedals for?

Racer who needs to pack the set away

You practise at a desk and want to be able to put the pedals away after driving. Compare their dimensions with the space available and check that the set can sit securely and connect to your wheel or platform. Thrustmaster lists the T3PM’s base dimensions as 300 × 210 mm.

Racer practising braking points

You want to practise your braking input through a series of corners and can set the pedals up securely. An adjustable pressure-sensitive brake may be worth comparing; MOZA lists a load cell and adjustable pedal spacing among the SR-P’s features.

Racer with a fixed mini-rig

You have limited floor space but a sturdy mounting point, and want to adjust the pedal position or brake resistance. Heusinkveld specifies a rigid base for the Sprint; Sim-Lab recommends checking the mounting points and clearance when fitting it to a cockpit from another brand.

What should you consider when choosing?

Adjustable brake with a T-Series connection

Choose this if: you use a compatible Thrustmaster T-Series wheel and want to adjust the brake resistance. Thrustmaster lists four brake pressure settings and base dimensions of 300 × 210 mm for the T3PM.

The trade-off: the T3PM isn’t a load-cell brake. Also check the exact connection and the clearance under your desk.

Adjustable load-cell pedals

Choose this if: you mainly want to practise your braking input and can position the pedals securely. The Thrustmaster T-LCM has a load cell and adjustable springs; the MOZA SR-P is a two-pedal set with a direct USB connection to a PC.

The trade-off: check the connection and space required for each model. The SR-P set doesn’t include a clutch.

Load-cell pedals on a fixed, rigid rig

Choose this if: you have a fixed mounting point and pedal adjustability matters to you. Heusinkveld describes the Sprint two-pedal set as suitable for mounting on a full-frame rig.

The trade-off: these aren’t an obvious choice for pedals that stand loose on the floor; the rig or base plate may take up space.

What to consider What should you check? Who is this important for?
Space and stability Measure the width, depth and height of your practice area. Thrustmaster lists the T3PM as 300 × 210 mm; MOZA gives the SR-P dimensions as 410 × 310 × 170 mm. Dimensions alone don’t prove that a set will sit securely. If I want to put the pedals away after driving, the set needs to fit and stay firmly in place while I brake. Around 33% of consumers give space and stability top priority.
Consistent braking input Compare the type of brake sensor and adjustment options with the mounting setup your rig can support. If I practise braking points on a virtual street circuit, I want to control my braking input without the set shifting. Around 27% of consumers prioritise consistent braking input.
Connection to existing equipment Check the full model name of your wheel and platform, as well as any required cable, adapter or connection through the wheel base. If I want to keep using my current wheel or PC, I need to know in advance how the chosen set needs to be connected. Around 27% of consumers give compatibility with existing equipment top priority.
Adding extra components Check what’s included with the set and whether a future clutch or brake kit is designed for that exact product line. If I want to add components later, I want to avoid buying a kit that isn’t compatible with my pedal set. Around 13% of consumers rank expandability above other purchasing factors.

Buying pitfalls

  • Assuming maximum braking force means faster lap times

    A stated sensor capacity or pressure resistance describes a product specification, not how much faster you’ll be on a virtual circuit.

    Compare the adjustable brake feel with what you can use on your own stable setup.

  • Confusing a PC connection with standalone console compatibility

    MOZA describes USB use of the SR-P on a PC. For standalone PC use with the basic CSL set, Fanatec specifies a separate ClubSport USB Adapter, which isn’t included.

    Before buying, check the full model name, your platform and the connection method described by the manufacturer.

    The separate USB adapter is required for the Fanatec configuration mentioned.

  • Assuming similarly named brake kits are interchangeable

    MOZA states that the SR-P Lite brake kit isn’t compatible with the SR-P.

    Check the full product line name, including ‘Lite’, before choosing an upgrade.

  • Buying a stiff brake without space to mount it

    Heusinkveld specifies a very rigid base for the Sprint. This type of fixed mounting may be less suitable if you want to put the pedals away after use.

    Measure the mounting area in advance and allow for the seat and the full setup.

    You’ll need a suitable rigid base or rig; factor in the space it requires when planning your setup.

Brands to consider

Thrustmaster

The T3PM is an option if you want to adjust brake resistance within a compatible T-Series system; the T-LCM is the load-cell option.

  • Thrustmaster lists four brake pressure settings and base dimensions of 300 × 210 mm for the T3PM. The T-LCM uses a load cell.
  • The pressure resistance of the T3PM isn’t the same as a load-cell sensor. Check that both models connect to your wheel and platform.

MOZA Racing

The SR-P two-pedal set is an option for PC users looking for a separate USB connection and a load-cell brake.

  • MOZA lists adjustable pedal spacing and a non-slip pad included in the box.
  • The two-pedal SR-P set doesn’t include a clutch. According to MOZA, the SR-P Lite clutch and brake kit aren’t compatible with the SR-P.

Heusinkveld

The Sprint two-pedal set is designed for those with a fixed, rigid mounting point who value pedal adjustability.

  • Heusinkveld lists adjustable brake resistance, pedal angle and pedal travel.
  • The manufacturer specifies a very rigid base because of the potential braking force, so this set isn’t an obvious choice for pedals placed loose on the floor.

Fanatec

CSL Pedals are an option if you already have a compatible Fanatec wheel base or want to put together the required PC connection.

  • The manufacturer describes connection through the wheel base and PC use with a separate ClubSport USB Adapter.
  • The adapter isn’t included with the basic set; check which version and connection you need.

Sim-Lab

The XP1 Loadcell Pedal Set is available as a two- or three-pedal set for those looking for mechanical adjustability and a suitable mounting point.

  • Sim-Lab lists adjustable resistance, pedal travel and pedal angle.
  • For a cockpit from another brand, Sim-Lab recommends checking the mounting points and clearance.

Related products

Related products coming soon.

Frequently asked questions

Can I use a stiff load-cell brake loose under my desk?

Not without checking the model’s mounting requirements. Heusinkveld requires a very rigid base for the Sprint because of the potential braking force, so a suitable rig or base plate should be part of your decision.

How can I avoid connection issues with T3PM pedals?

According to the T3PM manual, connect the pedals to the wheel first, then connect the wheel to your PC or console. Also check that your wheel and platform are compatible with the set you’ve chosen.

When shopping online in the Netherlands, do I have a cooling-off period and a legal guarantee?

ACM ConsuWijzer states that ordinary online product purchases generally come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. You also have statutory rights against the seller if a product doesn’t perform as you could reasonably expect under normal use; any manufacturer’s warranty doesn’t replace those rights.