Who is this choice relevant to?

Shared workspace manager

Wants to give visitors internet access without putting work devices on a network they can access. Ubiquiti Help Center and ASUS Netherlands describe network or guest isolation options. Check which settings your chosen equipment offers, then test the configuration.

Reader in a workspace with weak Wi-Fi

Wants to download digital magazines in an area where walls, ceilings or distance may weaken the signal. First, take measurements in the areas you use before deciding between a single router and additional Wi-Fi points. TP-Link describes mesh as a way to connect units.

User with several simultaneous downloads

Wants to download while other people are using the connection. Assess the speed over a network cable separately from Wi-Fi, and check which network connections your chosen setup has, as recommended by Consumentenbond and ASUS Netherlands.

What should you look for when buying?

One router connected to an existing modem

Suitable when: your wired connection is good and one centrally positioned router reaches all work areas. ASUS says the ASUS RT-AX58U has a guest network and wired connections.

Consider: walls and distance can limit coverage; the stated Wi-Fi speed is not a guaranteed download speed.

Mesh or an additional access point

Suitable when: measurements show weak Wi-Fi in work areas spread across the space. TP-Link also describes an optional Ethernet connection between Deco X50 units.

Consider: multiple units need to be positioned appropriately and may require cabling; a set’s stated coverage does not guarantee the range you’ll get in a particular building.

Set up separate guest and work networks

Suitable when: visitors need internet access but must not be able to reach work devices; you may also want to prevent visitors from accessing each other’s devices. Ubiquiti documents network and client isolation.

Consider: the level of separation you need depends on the available features and how they’re configured. Ubiquiti warns that advanced gateway features can reduce the performance of UniFi Express UX.

Consideration What to look for when buying Consumers this applies to
Coverage in the work areas you use Measure Wi-Fi where downloads take place; compare one router with multiple Wi-Fi points. If I download magazines in several areas, I want to know whether Wi-Fi reaches them before choosing extra units. Around 27% of consumers in this situation put coverage first.
Separating visitors from work devices Check guest access, network isolation and, if needed, isolation between visitors; test the settings. When visitors need internet access, I want to prevent them from reaching work devices and, if necessary, limit their access to one another as well. For around 27% of consumers, this separation comes first.
Downloads while others are online First measure the connection over a network cable, then check Wi-Fi in the work areas; compare the relevant WAN and LAN connections. I want to download magazines while others are using the connection, but first I need to know whether the internet connection or Wi-Fi is the limiting factor. Around 26% of consumers give simultaneous use the highest priority.
Connection and updates Check how the router connects to your existing modem and provider settings, and how firmware updates are made available. If I install my own router, I want to know how it will work with my connection and how to keep it updated. For around 20% of consumers, straightforward connection and maintenance are the main considerations.

Common pitfalls

  • Assuming a high Wi-Fi speed means fast downloads

    Your provider’s connection speed and your Wi-Fi speed can be separate bottlenecks. A new router won’t automatically fix a slow connection from your provider.

    First, measure the speed using a computer connected by network cable, then assess Wi-Fi in the work area.

  • Assuming every guest network isolates everything

    Keeping visitors off your local network and preventing them from communicating with one another require different settings.

    Check which network and client isolation features are available, then test the separation you’ve configured.

  • Assuming similar model names mean the same version

    Deco X50 and Deco X50-PoE are different versions. The number of units and connection options can also vary between products.

    Compare the full model name, version, pack size and relevant features on the product page.

Brands to compare

TP-Link

The Deco X50 range is a mesh option to consider when work areas are spread out.

  • TP-Link says the Deco X50 has Wi-Fi 6, three gigabit ports per unit and optional Ethernet backhaul.
  • The stated coverage for a particular set is not a measurement of your workspace. Deco X50 and Deco X50-PoE are different versions.

ASUS

The RT-AX58U is an option to compare if you’re looking for a single router with guest access and wired connections.

  • ASUS lists a guest network for the RT-AX58U that restricts access to the local network, four gigabit LAN ports and a gigabit WAN port.
  • Specifications differ between V1 and V2, so check which version you’re buying.

FRITZ!

The FRITZ!Box 4060 is a router to consider alongside an existing modem.

  • FRITZ! lists tri-band Wi-Fi 6, a 2.5-gigabit WAN port and three gigabit LAN ports.
  • According to FRITZ!, a separate modem is needed for the fixed connections mentioned. The stated top wireless speed is not a guaranteed download speed.

Ubiquiti

UniFi is worth considering if you want to set up network and client isolation. Ubiquiti says UniFi Express UX combines a gateway with a Wi-Fi 6 access point.

  • Ubiquiti documents network and client isolation for guest access.
  • You’ll need to configure the separation to suit your needs. Ubiquiti warns that advanced gateway features can reduce the performance of UniFi Express UX.

Joybuy products for this setup

This selection includes mesh sets for work areas in different locations, as well as a single router for use with an existing modem. Before buying, check that the specific version meets the applicable requirements for radio equipment. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) explains the cybersecurity requirements that have applied since 1 August 2025.

TP-Link Deco X50 mesh set with three units

TP-Link Deco X50 (3-pack)

Suitable for work areas in different locations where you’re considering a mesh setup.

Wi-Fi 6, dual-band (2.4 GHz and 5 GHz) and three gigabit ports per unit, according to the product information.

View at Joybuy
ASUS RT-AX52 Pro router

ASUS RT-AX52 Pro

Suitable if you want to use a single Wi-Fi router with an existing modem.

AX3000, dual-band (2.4 GHz and 5 GHz) and gigabit Ethernet, according to the product title.

View at Joybuy
TP-Link Deco XE75 mesh set

TP-Link Deco XE75

Suitable if you’re considering a mesh set with guest access for work areas in different locations.

Mesh Wi-Fi 6E, tri-band (2.4 GHz, 5 GHz and 6 GHz) and three units, according to the product information. The description lists three gigabit ports per unit and guest access.

View at Joybuy
TP-Link Deco X50-PoE mesh set with three units

TP-Link Deco X50-PoE (3-pack)

Suitable if you’re considering a mesh setup with PoE support for positioning the units.

Wi-Fi 6, PoE support and two Ethernet ports per unit, according to the product information.

View at Joybuy
TP-Link Deco X50 mesh set with two units

TP-Link Deco X50 (2-pack)

Suitable if you’re considering a two-unit mesh set for work areas in different locations.

Wi-Fi 6 and three Ethernet ports per unit, according to the product information; the description also mentions guest networks.

View at Joybuy

Frequently asked questions

Should I buy a new router if magazines are slow to download?

Not straight away. First, measure your internet speed over a network cable, then check Wi-Fi in the work area. Consumentenbond distinguishes between your provider’s connection and Wi-Fi. A slow connection, a poorly positioned router and weak Wi-Fi coverage each call for a different solution.

Is a guest network enough to keep work devices private?

That depends on the isolation features the device offers and how you configure them. ASUS says the RT-AX58U guest network restricts access to the local network. If visitors must not be able to communicate with each other either, Ubiquiti describes additional client isolation.

Can I connect my own router in the Netherlands?

Yes. ACM ConsuWijzer explains that you can choose your own router. Check the connection settings for your service and keep the device up to date.

How do I keep my router up to date?

Check for firmware updates in the manufacturer’s app or on its website, and enable automatic updates if available. VeiligInternetten also recommends changing the default login details.

What requirements apply to Wi-Fi routers sold in the Netherlands?

The relevant European requirements apply to radio equipment; since 1 August 2025, these have included stricter cybersecurity requirements. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) explains that manufacturers affix the CE mark when a product conforms. Check the specific version: a general product description alone does not prove that it meets the requirements.