Who is this choice relevant to?

Producers balancing kick and bass

You want to assess the low end while mixing. So, don’t just look at the stated frequency limit: your listening position and room also affect what you hear. Genelec explains how monitor placement plays a part.

Users sharing one computer

You want to switch easily between the computer, any audio interface and listeners. ADAM Audio and Kali Audio describe both USB-C and analogue connections on their respective models. Consider which source the different users actually need.

Mixers working at a small desk

You need room for two speakers and a symmetrical listening setup. Measure the available space and consider the distance and angle to your listening position, as Genelec recommends.

What should you look for when choosing?

Compact stereo pair with USB-C

A good fit for: a shared computer as the playback source, limited desk space and direct playback without a separate interface.

Bear in mind: check the frequency limit along with its measurement conditions, and assess the low end on another familiar playback system too. USB-C won’t correct your room.

Two separate analogue monitors

A good fit for: a workstation with an audio interface or mixer and suitable outputs. The Yamaha HS5 and PreSonus Eris Studio 5 are models you could compare.

Bear in mind: check how many monitors you need, along with the connections, cables and available space, before putting your setup together.

Very small monitor with XLR

A good fit for: a particularly tight space where a balanced XLR source is available; the Genelec 8010A is one model to consider.

Bear in mind: Genelec specifies a limit of 67 Hz at −6 dB for the 8010A. So, assess the deepest bass in a dance track on another playback system too.

What to consider What should you check? Who is this important for?
Assessing kick and bass Compare frequency ranges only when they use the same dB measurement basis, and check the low end on another familiar playback system too. If I want to assess the balance between kick and bass, I look beyond a single stated limit and listen away from my usual spot too. Around 25% of consumers prioritise checking the low end.
Connecting to a shared computer Check the available outputs, cables required, source selection and how easy it is to reach the volume control. If different users share the same computer and sometimes use an interface, I want a connection that suits their source. Around 25% of consumers prioritise workstation connectivity.
Placement and stereo imaging Measure whether two speakers will fit, then angle them towards a fixed listening position with similar distances on the left and right. If my desk has limited space, I want to fit two monitors without compromising their stereo positioning. Around 20% of consumers prioritise placement.
Listening at a manageable volume Choose a setup where every user can easily reach the volume control, and agree on volume levels and listening times. If I share the workspace, I want to be able to adjust the level easily and be considerate of others in the room. Around 15% of consumers prioritise keeping listening levels manageable.
Putting together a complete stereo pair Check whether a model is sold individually or as a pair, and find out which connections and cables your source requires. If I want to put together a complete stereo setup, I want to know in advance what’s in the box and what my source needs. Around 15% of consumers prioritise a complete setup.

Common buying mistakes

  • Assuming the price is for a stereo pair

    The Yamaha HS5 and PreSonus Eris Studio 5 are sold individually. For stereo, you’ll need two of any model sold individually.

    Check the pack size and connections before choosing a complete, working setup.

  • Comparing frequency limits without checking the dB definition

    A limit at −10 dB is not the same as one at −6 dB or a range within ±3 dB. So, these figures are not directly comparable.

    Note the measurement basis for each model and assess the low end at your own listening position too.

  • Assuming a setting will fix poor placement

    Reflections and room modes affect what you hear at your listening position, even when a model has placement settings.

    First, make room for two symmetrically placed speakers. Then adjust any available controls to suit your actual setup.

Brands worth considering

ADAM Audio

The D3V is a compact desktop stereo pair with USB-C playback and balanced TRS connections.

  • ADAM Audio describes a control knob and placement settings.
  • The manufacturer specifies 45 Hz at −6 dB. This figure alone doesn’t determine how deep the bass will sound at your listening position.

Kali Audio

The LP-UNF is a desktop stereo pair with USB-C, balanced TRS, RCA and Bluetooth.

  • Kali Audio lists settings for different desk and wall positions.
  • The manufacturer specifies 39 Hz at −10 dB and 54 Hz at ±3 dB. Don’t compare 39 Hz directly with a limit based on a different dB definition.

Yamaha

The HS5 is an analogue nearfield monitor for a setup with suitable XLR or TRS outputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM.
  • The HS5 is sold individually, so you’ll need two monitors for stereo. Yamaha distinguishes between 54 Hz at −10 dB and 74 Hz at −3 dB.

PreSonus

The Eris Studio 5 is an active monitor with analogue connections and controls for adjusting the sound to suit its placement.

  • PreSonus lists Acoustic Space, low-cut, mid and high controls.
  • The Eris Studio 5 is sold individually, so check whether you need two for your setup.

Genelec

The 8010A is a small active monitor with an analogue XLR input and room compensation switches.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
  • The manufacturer specifies a limit of 67 Hz at −6 dB. You’ll need two monitors for stereo, and deep bass remains a separate consideration.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you set up two monitors on a shared desk?

Angle both monitors towards a fixed listening position, and try to keep the distances equal on the left and right, with similar nearby reflections. Genelec recommends a 60° stereo triangle at the listening position. Adjust any placement settings to suit your actual setup.

Can a USB-C monitor set replace your audio interface?

According to ADAM Audio, the D3V can work directly as a USB audio device when playing back from a compatible computer. That doesn’t automatically mean the set will replace the recording inputs or other functions you use an interface for.

What if the bass sounds good at your desk but not elsewhere?

Check the symmetry and listening position first, before changing the mix. Genelec explains how reflections and room modes affect playback at the listening position. Then check the mix on another familiar playback system too.

What are your rights when buying online in the Netherlands?

For a standard online consumer purchase, you’ll generally have a statutory 14-day cooling-off period after delivery, with some exceptions. The seller is also responsible for putting things right if a product doesn’t meet what you could reasonably expect from it. ACM ConsuWijzer distinguishes between statutory rights and commercial guarantees.

Can you mix as loudly as you like at home?

Don’t assume that any particular volume or time is always allowed; the Dutch Government recommends agreeing arrangements first if music is causing a nuisance to neighbours. The WHO warns that louder sound and longer listening increase the risk of hearing damage.