Who is this choice relevant to?

A mixer who considers their colleagues

You want to know whether and when you can use speakers without disrupting other people’s work. A quiet listening option may matter more than choosing a different monitor model.

An electronic music mixer

You want to assess stereo balance, kick and bass. Bear in mind that a quoted lower frequency limit isn’t necessarily what you’ll hear from your listening position.

A mixer with a small desk

Your choice depends on whether there’s room for two monitors, which connections are available and whether you’re buying one speaker or a stereo pair.

What should you look for when buying?

Compact active stereo pair

Choose this if: you’ve agreed when speakers can be used and can position them symmetrically on your desk.

Bear in mind: connections and bass response vary by model. Specifications can’t predict what your colleagues will hear or how the bass will sound where you’re sitting.

Compact analogue stereo pair

Choose this if: your source works with the analogue inputs and you want a set sold as a pair, such as the Yamaha HS4.

Bear in mind: Yamaha quotes a lower limit of 83 Hz at −3 dB for the HS4; don’t treat this as a guarantee that you’ll be able to assess your sub-bass fully.

Separate compact monitors with XLR

Choose this if: you have a suitable analogue output and want to put together your own pair of separate monitors.

Bear in mind: Genelec sells the 8010A individually, so you’ll need two monitors for stereo.

Headphones for quiet moments

Choose this if: colleagues can’t have sound from speakers, or workplace arrangements require a quiet space.

Bear in mind: save speaker checks for an agreed time or another room.

What to consider What should you check? Who is this important for?
Avoid disturbing colleagues Agree on listening times and keep a quiet listening option available. If I work in a shared space, I want to know when speakers are suitable without disturbing others. Around 33% of consumers make avoiding noise nuisance their top priority.
Kick, sub-bass and stereo image Compare frequency limits only alongside their measurement conditions: Yamaha quotes 83 Hz at −3 dB for the HS4; Genelec quotes 67 Hz at −6 dB for the 8010A. Genelec recommends a symmetrical stereo setup. If I want to assess kick, bass and stereo balance, I consider both the measurement conditions and how the room affects what I hear from my listening position. Around 27% of consumers prioritise checking their mix.
Desk space Measure the space and check whether two monitors can be positioned symmetrically at a suitable height. The ADAM Audio D3V has detachable stands; the Kali Audio LP-UNF has settings for different desk and wall positions. If my desk has limited space, I want to know whether two monitors will fit properly and can be positioned correctly. Around 20% of consumers put placement and desk space first.
Connections and complete set Check your source’s outputs, which cables you’ll need and whether the package contains one monitor or a pair. The D3V has USB-C and balanced TRS; the Genelec 8010A is sold individually. If I want to connect my source and need a complete stereo pair, I want to know what’s in the box before buying. Around 20% of consumers make connections and a complete set their top priority.

Common pitfalls

  • Assuming a compact monitor is a quiet solution

    A small cabinet won’t necessarily stop sound from disturbing colleagues in a shared workspace.

    Agree on listening times and keep headphones handy for quiet periods.

  • Comparing frequency limits without checking the measurement conditions

    A figure at −6 dB, such as the Genelec 8010A’s 67 Hz, isn’t directly comparable with the Yamaha HS4’s 83 Hz at −3 dB. The room also affects the bass you hear.

    Check the dB condition for each figure and assess the setup from your own listening position.

  • Assuming one monitor makes a stereo pair

    Genelec lists one 8010A per package, while the Yamaha HS4 is packaged as a pair.

    Check the number of monitors in the package before buying, and compare it with what you need for a complete stereo setup.

  • Thinking calibration will completely solve office acoustics

    IK Multimedia offers ARC X with the iLoud Micro Monitor Pro, but the manufacturer’s claims about the calibration results aren’t an independent measurement of your workplace.

    Check whether you’re looking at the single-monitor version or the pair; IK lists the measurement microphone as included with the pair. Also pay attention to placement.

Brands to compare

ADAM Audio

The D3V is an active desktop stereo set with USB-C or balanced TRS connections.

  • ADAM Audio lists detachable stands and placement switches.
  • The quoted 45 Hz is at −6 dB; this figure can’t predict how the bass will sound in a shared workspace.

Kali Audio

Kali Audio says the LP-UNF is designed for desktop mixing and has settings for different positions.

  • Kali Audio specifies USB-C, balanced TRS and RCA.
  • The quoted 39 Hz is at −10 dB; don’t compare this figure directly with a frequency limit measured under a different dB condition.

Yamaha

The HS4 is an analogue monitor set that Yamaha says is packaged as a pair.

  • Yamaha lists a headphone output and room control and high trim controls.
  • The quoted lower limit of 83 Hz at −3 dB makes it worth checking very low frequencies separately.

Genelec

The 8010A is a compact active monitor with an analogue XLR input, for anyone putting together their own stereo pair.

  • Genelec lists dimensions including the Iso-Pod and room compensation switches.
  • The package contains one monitor; the quoted 67 Hz is at −6 dB.

IK Multimedia

The iLoud Micro Monitor Pro is a compact option if you’re considering built-in ARC X calibration.

  • IK Multimedia says the measurement microphone is supplied with the pair.
  • Check whether you’re looking at a single monitor or a pair. IK Multimedia’s claims about calibration aren’t an independent measurement in your office.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I use studio monitors in a shared office?

That depends on workplace arrangements and whether your colleagues will be disturbed. Arboportaal describes disruptive noise as something that can be associated with stress, difficulty concentrating or reduced speech intelligibility, among other things. So agree on listening times and use headphones when the workspace needs to stay quiet.

How should you position two studio monitors for stereo?

Where possible, position them symmetrically, at the same height and angled towards your listening position. Genelec recommends an ideal angle of 60° between the left and right monitors, with your listening position at the tip of an equilateral triangle. Adapt this setup to the space available on your desk.

Will a subwoofer automatically help you assess electronic sub-bass?

No, placement still matters. Genelec says that placing a subwoofer against a wall or in a corner can increase its output, while a flatter frequency response generally requires a position that excites room resonances less. So consider both placement and tuning.

Do I need to buy two monitors for a stereo pair?

It depends on the model and version. Genelec lists one 8010A per package, while Yamaha packages the HS4 as a pair. Check how many monitors are included in the exact version before placing your order.

Does every iLoud Micro Monitor Pro come with a measurement microphone?

IK Multimedia lists the measurement microphone as included with the pair. So check whether the version you’re looking at contains one monitor or a pair.