Who is this Wi-Fi guide for?

Watching in a room with poor coverage

You want to watch a documentary in one fixed spot and can look for a midway point where the router still has a strong enough signal. The Consumentenbond recommends placing the device between the router and the area with a weak signal.

Housemates sharing a busy Wi-Fi network

You use several devices at the same time and want to find out whether the problem is Wi-Fi coverage, the shared internet connection or both. A wired test at the router can help you tell the difference, as the Consumentenbond advises.

Residents who may be able to run a network cable

You can discuss with the other residents whether a cable could be run to your viewing spot, and whether an access point or access point mode would suit your existing network setup.

What should you look for in a Wi-Fi extender?

Check your existing connection first

Choose this step if: a wired test at the router is repeatedly slow.

Bear in mind: a Wi-Fi extender won’t improve your incoming internet connection. If that’s the problem, discuss it with the account holder or provider.

Wireless repeater

Choose this if: coverage is weak mainly in the room where you watch, and there’s a midway point where the router signal is still usable.

Bear in mind: the connection between the repeater and the router will still depend on its position and any obstacles.

Wired access point

Choose this if: you have permission to run a network cable to or near your viewing spot, and the device supports access point or LAN bridge mode.

Bear in mind: you’ll need a suitable cable route and agreement on how the shared network will be used.

Multiple mesh points

Choose this if: several rooms have weak coverage and your housemates can agree on the network setup together.

Bear in mind: check that the mesh features you want work with your exact router model; general router compatibility doesn’t guarantee this.

What to consider What should you check? Who is this important for?
Coverage where you watch Compare the signal at the router, at possible midway points and where you watch. Check whether the chosen model’s indicator or app can help you find a suitable position. If I want to watch a documentary in one fixed spot, usable coverage there is my main concern; around 36% of consumers prioritise coverage in one viewing room.
Stable streaming while others are online Compare a wired test at the router with a test on the playback device, ideally while your housemates are online. Netflix Help Center recommends 5 Mbps or more for Full HD 1080p and 15 Mbps or more for UHD 4K on its service; these aren’t universal requirements for every streaming service. When my housemates are using the internet at the same time, I want to know whether streaming on my device will remain stable; around 29% of consumers give this situation top priority.
Connection to the extra Wi-Fi point Check whether a cable can be run to the desired spot, with permission, and whether the exact device supports access point or LAN bridge mode. I want to know in advance whether a wired connection is feasible; around 21% of consumers prioritise the connection route to the extra Wi-Fi point.
Multiple rooms and mesh compatibility Note your router model, identify which rooms have weak coverage and check the mesh system’s requirements for the exact product range. If I want coverage in more than one room, the setup needs to work with our router; around 14% of consumers prioritise coverage across multiple rooms and router compatibility.

Common buying mistakes

  • Buying a repeater when the incoming connection is the problem

    An extra Wi-Fi point can improve local coverage, but it won’t make a slow internet connection at the router faster.

    First, compare a wired test at the router with the speed where you watch.

  • Putting a wireless repeater in a dead zone

    The repeater needs to receive a signal from the router itself to provide coverage in the room where you watch.

    Find a midway point with a signal and test it there. If available, use the placement indicator or app.

  • Confusing router compatibility with support for every mesh feature

    According to TP-Link, OneMesh requires a OneMesh router; ASUS requires an AiMesh-compatible router for AiMesh.

    Check your router model and the requirements of the mesh system you want. If only one room has weak coverage, don’t automatically opt for multiple points.

  • Assuming the stated Wi-Fi speed is the streaming speed

    Streaming speed depends not only on the stated wireless connection speed, but also on the connection between the router, Wi-Fi point and playback device.

    Assess the connection speed measured where you watch against the service and picture quality you want.

Brands to consider

TP-Link

The RE705X is a Wi-Fi 6 extender with access point mode; OneMesh is mainly relevant if you have a compatible router.

  • TP-Link lists a gigabit port and access point mode for the RE705X.
  • According to TP-Link, OneMesh requires a OneMesh router; stated wireless speeds aren’t a measurement of the signal where you watch.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you already have a FRITZ!Box or may be able to use a LAN connection.

  • FRITZ! lists one gigabit LAN connection and compatibility with other routers.
  • The stated compatibility within FRITZ! Mesh applies to suitable FRITZ! devices and isn’t guaranteed with every router.

NETGEAR

The EAX15 is an extender for an existing network, with an Ethernet port for a wired device.

  • NETGEAR lists a gigabit port for a wired connection.
  • A stated wireless speed alone doesn’t tell you what streaming quality you’ll get where you watch.

ASUS

The RP-AX58 is a range extender; AiMesh is worth considering if your existing router supports the system.

  • ASUS lists compatibility with many routers.
  • AiMesh features require an AiMesh-compatible router; ASUS also notes that 160 MHz availability may vary by region.

devolo

devolo describes the WiFi 6 Repeater 3000 as suitable for repeater and access point use.

  • devolo lists a gigabit LAN connection and access point mode.
  • The stated mesh compatibility is with other devolo Wi-Fi products. The installation description is a manufacturer claim, not an independent user test.

Wi-Fi solutions on Joybuy

This selection includes mesh systems for multiple rooms, a wireless repeater and a wired access point. Check that the exact model has the correct CE marking: the Dutch Authority for Digital Infrastructure states that radio equipment sold in the Netherlands must meet European requirements and carry the required CE marking.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

Suitable for a setup with multiple mesh points to provide coverage in different rooms.

Wi-Fi 7; tri-band; two units. The product description mentions wired and wireless backhaul.

View on Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

Suitable for a mesh setup with multiple points to provide coverage in more than one room.

Dual-band (2.4 GHz and 5 GHz); Wi-Fi 5 (802.11ac); three units. The product description lists two network ports per unit.

View on Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

Suitable for a mesh setup with multiple points if more than one room needs better coverage.

Dual-band (2.4 GHz and 5 GHz); Wi-Fi 5 (802.11ac); three units. The product description mentions app-guided placement and roaming between Deco units.

View on Joybuy
TP-Link Omada EAP673-Extender

TP-Link Omada EAP673-Extender

Suitable for a wireless repeater setup in an area with weak coverage, provided the device itself is still within range of the existing network.

Wi-Fi 6; dual-band; one Ethernet port.

View on Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

Suitable for a wired setup if you can run a cable to the desired location and the right mode works with your network.

2.4 GHz; up to 300 Mbit/s; 10/100 Mbit/s Ethernet ports; access point, range extender and client modes. Passive PoE requires a suitable power source over Ethernet.

View on Joybuy

Frequently asked questions

How can you check before buying whether a Wi-Fi extender will help with buffering?

First, test the connection using a cable at the router, then test it on the device and in the place where you want to watch. If wired tests are repeatedly slow too, speak to the account holder or provider about the internet connection first; an extra Wi-Fi point won’t make it faster.

Where should you place a wireless repeater?

Don’t automatically put it in the room with the weakest signal. Instead, place it midway, where it can still receive the router’s signal and has as few obstacles as possible. If available, use the placement indicator or app. Keep your Wi-Fi network secure and your equipment up to date.

Do you need a transmitting licence or registration to use Wi-Fi in a Dutch student house?

According to the Dutch Authority for Digital Infrastructure, ordinary Wi-Fi use within licence-exempt frequency bands doesn’t require a licence, notification or registration. This is separate from the product requirements for the radio equipment being sold.

What should you look for in a Wi-Fi extender sold in the Netherlands?

Check that the exact model has the correct CE marking. The Dutch Authority for Digital Infrastructure states that RED 3.3 cybersecurity requirements have applied since 1 August 2025 to radio equipment covered by them; the requirements that apply depend on the device.

If a product develops a fault, are you limited to the manufacturer’s warranty?

No. According to ACM ConsuWijzer, in the Netherlands you have a statutory guarantee as well as any manufacturer’s or seller’s warranty. If a product breaks during normal use earlier than you could reasonably expect, the seller must offer an appropriate solution free of charge; this doesn’t automatically mean a fixed two-year period.