Who is this setup for?

Film mixer with a small desk

You assess dialogue and music from a fixed listening position, but share the room. First, check whether you can position two monitors symmetrically. For stereo, Genelec recommends a 60° angle, with the listener at the apex of the triangle.

Shared computer user

You want to switch between computers or users without confusing connections or a volume control that’s hard to reach. Compare a direct USB-C connection and on-desk controls with analogue inputs via an existing audio interface.

Film music mixer working with bass-heavy soundtracks

Your soundtrack includes low frequencies that may not come through as clearly on small monitors. Compare frequency specifications only when the measurement conditions match, and check the mix on a second monitoring system too.

What should you look for?

Compact active desktop set

Choose this option: if desk space is limited and you want to monitor directly from a computer. ADAM Audio describes the D3V as a stereo set with USB-C, balanced TRS inputs and a volume control.

Bear in mind: check that USB-C is suitable for the shared computers and that you can position both speakers symmetrically.

Two separate active nearfields

Choose this option: if you have an audio interface and can place the speakers on either side of a fixed mixing position. The Yamaha HS5 and JBL 305P MkII have XLR and TRS inputs.

Bear in mind: check that you’re buying two speakers and have the right cables. Room controls are no substitute for suitable positioning.

Very compact separate monitors

Choose this option: if saving space or being able to move your setup matters more than assessing deep bass on the monitors themselves. Genelec specifies dimensions of 195 × 121 × 115 mm for the 8010A.

Bear in mind: Genelec states that each pack contains one monitor and specifies a lower limit of 67 Hz at −6 dB. Check the low end elsewhere and budget for a complete stereo pair.

Consideration What should you check? Who is this important for?
Listening position Make room for two monitors at the same height and distance. For stereo, Genelec recommends a 60° angle, with the listener at the apex of the triangle. I want to assess dialogue and stereo imaging from one fixed position, even when the desk is shared. Around 33% of consumers cite a reliable listening position as their main buying concern.
Connections and controls Compare the USB-C connection and volume control on the ADAM Audio D3V with the analogue XLR and TRS inputs on the Yamaha HS5 and JBL 305P MkII. Also check the outputs on your computer or interface. When users change, I want to know how to connect each computer and adjust the volume directly. Around 27% of consumers prioritise connections and controls for shared use.
Low frequencies Compare frequency limits alongside their corresponding dB conditions: Genelec specifies 67 Hz at −6 dB for the 8010A; Yamaha lists 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. Also listen on a second system. When working with bass-heavy music and effects, I don’t want to assess low frequencies on small monitors alone. Around 20% of consumers cite checking low frequencies as their main buying concern.
Complete stereo set Check what’s included in the box: Genelec states that each pack contains one 8010A, Yamaha sells the HS5 individually, and ADAM Audio describes the D3V as a stereo set. I want to know in advance what I’ll need for a working stereo pair, including any extra cables. The cost of a complete set is the main buying concern for around 20% of consumers.

Pitfalls to avoid

  • Comparing the price of one monitor with that of a stereo set

    The Yamaha HS5 and Genelec 8010A are sold individually, while ADAM Audio describes the D3V as a pair. So an offer for one monitor doesn’t automatically give you a stereo pair.

    Compare what’s included in the box and check whether you have a left and right monitor, suitable cables and, if needed, an audio interface.

  • Comparing frequency limits without checking the measurement conditions

    Yamaha gives both a −10 dB and a −3 dB lower limit for the HS5; Genelec specifies the 8010A at −6 dB. This means the figures aren’t directly comparable.

    Check the dB condition for each frequency figure, and monitor low frequencies on another system too.

  • Assuming room EQ will solve every placement issue

    Room or boundary correction settings won’t automatically fix problems caused by uneven placement or reflections.

    First, make room for a symmetrical setup around your listening position. Then assess which adjustment options are useful in that position.

Brands to compare

ADAM Audio

The D3V is a compact stereo set that connects directly to a computer; the T5V is a separate active nearfield monitor for an analogue setup.

  • ADAM Audio lists USB-C, two balanced TRS connections, a volume control and stands for the D3V.
  • The T5V has a rear-facing bass reflex port, so check that your desk setup is suitable.

Yamaha

The HS5 is a separate active nearfield monitor with analogue connections and adjustable ROOM CONTROL and HIGH TRIM.

  • Yamaha lists XLR and TRS inputs and specifies frequency ranges using different dB conditions.
  • The HS5 is sold individually, so you’ll need two monitors for stereo.

JBL Professional

The 305P MkII is a separate active monitor with XLR, TRS and adjustable Boundary EQ for an analogue workstation.

  • JBL Professional also lists adjustable input sensitivity.
  • Manufacturer claims about listening area and accuracy aren’t an independent comparison with other models.

Genelec

The 8010A is a very compact, separate active monitor for a tight or portable workspace.

  • Genelec specifies dimensions of 195 × 121 × 115 mm, one analogue XLR input and 67 Hz at −6 dB.
  • The box contains one monitor, so check what you’ll need for a stereo pair and assess deep bass elsewhere too.

KRK

The ROKIT 5 Generation Five is a separate active monitor with several adjustment modes for a single workstation.

  • KRK describes three voicing modes and 25 combinations of boundary and EQ settings.
  • These manufacturer features alone don’t prove that the monitor will deliver a reliable film mix in a particular position.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position monitors on a shared desk?

Choose one fixed listening position and place the left and right monitors as symmetrically as possible, angled towards that position. Genelec describes a 60° angle for stereo; a different position at the desk can change the perceived balance.

Who can help if a monitor develops a fault too soon during normal use?

For a consumer purchase in the Netherlands, ACM ConsuWijzer says the seller must resolve the issue if the product doesn’t perform as you could reasonably expect during normal use. Your statutory rights and any manufacturer’s warranty are not the same thing.

Can you try a set ordered online at home and then cancel the purchase?

For a standard online consumer purchase, you’ll usually have a statutory 14-day cooling-off period after delivery. ACM ConsuWijzer lists some exceptions, so check which terms apply to your purchase.

What do CE marking and agreements about noise mean for this setup?

CE marking is required for electrical equipment only when the relevant harmonised EU rules say it is; it’s the manufacturer’s declaration of conformity, not an independent certification. For noise affecting neighbours, the Dutch government advises agreeing on arrangements together first.