Who is this choice relevant to?

Sharing your screen from upstairs

You want to show what’s on your computer at your desk on the shared screen downstairs. First check that your computer and screen support the same casting protocol. Google Help sets out the requirements for casting from Chrome, while Microsoft Support explains those for Windows projection.

Upstairs resident with weak Wi-Fi

Your computer and screen are compatible, but the connection between floors isn’t good enough. According to the Consumers’ Association, you don’t always need new equipment to improve Wi-Fi. If you do need to extend it, cable options and where you place your network points both matter. TP-Link describes Ethernet backhaul for the Deco X50.

Keeping your provider’s router

You want to keep your existing router and extend its coverage. TP-Link describes an access point mode for Deco, but notes that some features aren’t available in the Deco app when using this mode.

What should you look out for?

Keep your existing router

When: if Wi-Fi works in both places or you haven’t yet identified the cause of the problem.

Trade-off: you won’t need any extra equipment, but this won’t automatically fix a weak connection upstairs.

Wired access point or mesh

When: if there’s a usable network cable upstairs or you can install one.

Trade-off: installing a cable takes work; in Deco access point mode, some features aren’t available in the Deco app.

Wireless mesh

When: if Wi-Fi upstairs is too weak and running a cable between network points isn’t practical.

Trade-off: the units need to be placed where they can connect to each other; the manufacturer’s stated range isn’t a measurement of coverage in your home.

Compatible screen receiver

When: if Wi-Fi works in both places, but the screen doesn’t support your computer’s protocol.

Trade-off: a receiver may make screen sharing possible, but it won’t fix weak Wi-Fi coverage.

What to consider What should you check? Who is this important for?
Screen compatibility Check whether your computer and screen support Google Cast or Miracast. For Google Cast, also check that your computer and receiver are connected to the same Wi-Fi network. If I want to share what’s on my computer upstairs, I first want to know whether the screen supports the feature I’ve chosen. Around 36% of consumers who prioritise screen compatibility say this is their main buying concern.
Coverage between floors Test the connection where you work and where the screen is. Check where an extra unit could go and whether it’s possible to run a cable between the units. If I work upstairs and use the screen downstairs, I want to know whether the connection is reliable in both places. Around 29% of consumers who mainly need coverage upstairs put this concern first.
Keeping your existing router Check whether your chosen system can operate in access point mode and which features remain available in that mode. If I want to keep my current router, I want to know in advance how the extension will work with my existing network setup. Around 21% of consumers who want to keep their current router say this is their main buying concern.
Cabling and extra equipment Check whether there are network sockets between floors, how many units you’ll need and whether your screen already has a suitable receiver. If I’d rather not run a cable or buy unnecessary extra equipment, I want to check what I already have first. Around 14% of consumers who see installation and extra equipment as their main considerations say this is their main buying concern.

Buying pitfalls

  • Buying a more powerful router when the screen doesn’t support the protocol

    Wi-Fi coverage and support for Google Cast or Miracast are separate requirements. Upgrading your network won’t add a screen receiver.

    First check your computer and screen, then try your preferred way of sharing your screen on your existing network.

  • Assuming the manufacturer’s stated range guarantees coverage upstairs

    A stated range doesn’t tell you how well the connection will work in your home. The placement of the units and the connection between them matter too.

    Check Wi-Fi in the places where you intend to use it, and compare running a cable with a wireless connection between network points.

  • Expecting the same router features in access point mode

    According to TP-Link, some features aren’t available in the Deco app when Deco is operating as an access point.

    Check in advance which router will provide the features you need and what will change with your chosen network mode.

Brands to consider

TP-Link

According to TP-Link, the Deco X50 range offers a Wi-Fi 6 mesh option in two- and three-packs, with three gigabit ports per unit. This may be useful if you need several network points or wired connections.

  • TP-Link describes Ethernet backhaul for the X50 and use behind an existing router in access point mode.
  • According to TP-Link, some features aren’t available in the Deco app in access point mode. The stated coverage isn’t a guarantee of the connection in your home.

FRITZ!

The FRITZ!Mesh Set 1700 is an expandable Wi-Fi 7 option. According to FRITZ!, the set reviewed consists of three Repeaters 1700.

  • FRITZ! describes installation behind a FRITZ!Box and behind a router from another manufacturer.
  • According to FRITZ!, when used behind a router from another manufacturer, one Repeater from the set becomes the Mesh Master for a separate FRITZ! home network. Check that this setup works with the devices you want to cast from.

ASUS

The ZenWiFi BD4 range offers Wi-Fi 7, access point mode and two automatically detected 2.5 Gbit/s ports per unit.

  • ASUS describes a wired AiMesh setup.
  • The stated port capacity isn’t a measured speed between your desk and screen. The cables and network configuration you need must suit your setup.

Joybuy products for mesh and access points

These products are designed to extend Wi-Fi using mesh, a wired connection between network points or an access point. For a specific device, also check the applicable product requirements: according to the Dutch Authority for Digital Infrastructure, sellers of radio equipment must comply with the relevant European requirements, including the required CE marking.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 2-pack

Suitable if you want to connect several areas wirelessly or can use a wired connection between mesh units.

Tri-band Wi-Fi 7; the product information lists 10 Gbps, 2.5 Gbps and 1 Gbps ports per unit, plus wired and wireless backhaul.

A mesh router doesn’t add a Google Cast or Miracast receiver; check that your computer and screen are compatible.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack

ASUS ZenWiFi BT8 2-pack

Suitable if you want to extend Wi-Fi with a mesh system and check whether your existing ASUS network is compatible with AiMesh.

Tri-band Wi-Fi 7 with 2.4 GHz, 5 GHz and 6 GHz bands. The product information lists compatibility with AiMesh routers.

A mesh router doesn’t add a Google Cast or Miracast receiver; check that your computer and screen are compatible.

View at Joybuy
ASUS ZenWiFi BD4, dual-band

ASUS ZenWiFi BD4 dual-band

Suitable if you want to extend your mesh network and make use of the option to connect network points with a cable.

Wi-Fi 7; the product information lists MLO and wired backhaul.

A mesh router doesn’t add a Google Cast or Miracast receiver; check that your computer and screen are compatible.

View at Joybuy
TP-Link Deco X50, 2-pack

TP-Link Deco X50 2-pack

Suitable if you want to extend Wi-Fi with a mesh system and may be able to connect the units with a network cable.

Wi-Fi 6; according to the product information, the two-pack has three gigabit ports per unit and optional Ethernet backhaul.

A mesh router doesn’t add a Google Cast or Miracast receiver; check that your computer and screen are compatible.

View at Joybuy
TP-Link Omada EAP613 access point with PoE

TP-Link Omada EAP613 access point

Suitable for a fixed network location where you want to install an access point and use one of the listed power options.

Wi-Fi 6; the product name lists 1775 Mbps and PoE. The product information specifies wall or ceiling mounting and PoE or DC power.

Before installation, check that the mounting location, network connection and power option suit your setup.

View at Joybuy

Frequently asked questions

Will a new router make my TV suitable for wireless screen sharing?

No, a router won’t automatically make your TV suitable for screen sharing. For casting from Chrome, Google Help describes a screen or receiver with Google Cast; Microsoft Support says the Windows projection method described requires a screen or adapter with Miracast. Check which feature both devices support.

How can you use mesh without replacing your existing router?

According to TP-Link, a Deco system can work as an access point behind your existing router. Check in advance which features remain available in this mode. For use behind a router from another manufacturer, FRITZ! describes a setup in which a Repeater becomes the Mesh Master. This network setup is different from Deco access point mode.

Can you connect mesh units with a network cable later?

According to TP-Link, the Deco X50 supports optional Ethernet backhaul. Before installing a cable, check the connections and setup instructions for the system you’ve chosen.

What are your rights to return an online purchase in the Netherlands, and what warranty applies?

According to ACM ConsuWijzer, online purchases generally come with a 14-day cooling-off period after delivery, although exceptions apply. This is different from your rights if a product is faulty, damaged or not as described. The statutory guarantee depends on how long you can reasonably expect the product to last; a two-year manufacturer’s warranty doesn’t automatically determine the statutory period.

Can I use my own router in the Netherlands, and what should I look for in Wi-Fi equipment?

According to ACM ConsuWijzer, you can choose your own router, but check which settings you need to use it with your internet connection. Radio equipment must meet European requirements. The Dutch Authority for Digital Infrastructure states that CE marking is one of the requirements for sellers. Check the information for the specific device; a model name alone doesn’t establish that a product listing is compliant.