Start by identifying the film format, then decide whether you mainly want to save a file quickly or carefully edit the scan afterwards. A standalone scanner can reduce the amount of time spent at a computer, while a dedicated film scanner requires more attention to settings and post-processing. For 120 film, make sure the scanner supports the exact format and includes the right holder.
Who is this for?
For anyone scanning after a long editing session
You want to capture a few old portraits without starting another lengthy computer-based process. Consumentenbond describes scanning your own photos as a practical option when you want to scan part of a collection or keep control over the results.
For anyone who wants to carefully edit 35mm portraits
You want to be able to correct your negatives later and are happy to spend extra time scanning and editing them. The Plustek OpticFilm 8200i SE is an example of a scanner for 35mm negatives and mounted slides.
For anyone with a range of film formats
Your collection may include both 35mm and 120 portraits. In that case, exact format support and the right holders are essential. Epson describes the support available for the Perfection V600 Photo, while other models support their own range of formats.
What should you look for?
Standalone scanner
A good choice if: after a long editing session, you want to view and save images without using a computer to scan them.
The trade-off: reflecta says the x66-Scan saves JPEG files to an SD card; its 22 MP output is interpolated from a 14 MP sensor.
Dedicated 35mm scanner
A good choice if: you have compatible 35mm film and care more about settings and post-processing than saving files straight away.
The trade-off: the Plustek OpticFilm 8200i SE is designed for 35mm film. According to LaserSoft Imaging, infrared correction is not suitable for traditional silver-based black-and-white film.
Flatbed scanner with transparency unit
A good choice if: you want to scan both 35mm and 120 film, as well as prints.
The trade-off: Epson Netherlands lists the Perfection V600 Photo as discontinued. If you’re considering one, check its condition, holders and software compatibility.
Use a scanning service
A good choice if: you don’t want to spend time loading, correcting and managing the files yourself.
The trade-off: Consumentenbond explains that using a service usually means paying per image and having less direct control over the scanning process.
| What to consider |
What to look for when buying |
Who it matters most to |
| Fewer steps |
Check whether the device works without a computer, what storage it uses and whether the film holder fits your negatives. |
After a long editing session, I want to save portraits without first launching scanning software. That’s why around 31% of consumers in this situation prioritise a simpler process. |
| Detail and post-processing |
Check the scanning settings and output formats; distinguish between sensor resolution and interpolated output. |
If I want to carefully correct portraits later, I need to know what the model captures and which files I can edit. Around 31% of consumers in this situation prioritise detail and files suitable for post-processing. |
| Film format and holders |
Identify the film size and check that the model supports the exact format and comes with the corresponding holder. |
With a mixed collection, I don’t want to discover after buying that some of my negatives won’t fit. Around 23% of consumers in this situation prioritise format coverage and compatible holders. |
| Dust and scratches |
Check that the correction method is suitable for your film type and the software used with your chosen model. |
If I want to minimise retouching, the correction method needs to suit the emulsion of my portrait film. Around 15% of consumers in this situation prioritise dust correction and less extra retouching. |
Common buying mistakes
-
Mistaking 22 MP output for 22 MP of sensor detail
According to reflecta, the x66-Scan’s 22 MP output is interpolated from a 14 MP sensor. So a larger output file doesn’t automatically mean the sensor has captured more detail.
Compare the original sensor or scanning specification with what you want to use the portraits for. If possible, assess a test scan of similar film.
If the result isn’t right for your needs, scanning or editing the images again could take extra time.
-
Choosing a 35mm scanner for a collection that includes 120 film
The Plustek OpticFilm 8200i SE is designed for 35mm negatives and mounted slides. A scanner for this format won’t automatically handle 120 negatives.
Identify the film size and check before buying that the exact format and a suitable holder are supported.
You may need to use another scanning method or a scanning service for negatives that don’t fit.
-
Assessing a discontinued flatbed model as if it were available new
Epson Netherlands lists the Perfection V600 Photo as discontinued. The condition and completeness of any second-hand model are therefore important factors.
Check that the specific scanner works, that the film holders are included and that the software is compatible with your computer.
Missing holders or software that doesn’t work with your computer could limit how you can use the scanner.
-
Expecting infrared dust correction to work with every black-and-white negative
According to LaserSoft Imaging, infrared correction cannot work through traditional silver-based black-and-white film in the same way as it can with compatible film.
Identify the type of film you have and check which other correction methods are available for your chosen model and software.
If the correction method isn’t suitable, you may still need to retouch the images manually or in software.
Relevant brands to consider
Plustek
The OpticFilm 8200i SE is an example of a scanner for carefully scanning 35mm negatives and mounted slides.
- Plustek specifies an infrared channel and a resolution of 7200 × 7200 dpi for this model.
- The stated format support is 35mm. Infrared correction isn’t suitable for traditional silver-based black-and-white film.
reflecta
The x66-Scan is a standalone option for several film formats; the RPS 10S is a separate option for 35mm film strips.
- According to reflecta, the x66-Scan saves JPEG files straight to an SD card. The RPS 10S automatically feeds strips containing 3 to 40 images.
- The x66-Scan’s 22MP output is interpolated from a 14MP sensor. The RPS 10S’s automatic feed isn’t a feature of the x66-Scan.
Epson
The Perfection V600 Photo is an example of a flatbed scanner for film and prints.
- Epson Netherlands specifies film holders and DIGITAL ICE for the V600, with support for 35mm and 120/220 film.
- Epson Netherlands lists the model as discontinued. If you’re considering one, check which holders are included and whether the software is compatible.
Kodak Photo Plus
The Slide N Scan, with its 5-inch screen, is a standalone option for the film formats listed by the seller.
- Kodak Photo Plus’s product description mentions SD card storage and included adapters for 135, 110 and 126 film.
- Before choosing, check that the stated formats and included adapters are suitable for your negatives.
Joybuy product picks
Related products coming soon.
Frequently asked questions
Should I sort my old portrait film first?
Yes. At the very least, identify the film format before choosing a model. The Plustek OpticFilm 8200i SE is designed for 35mm film; reflecta lists support for certain medium formats for the x66-Scan, as does Epson for the V600. Check which holders and exact image sizes each model supports.
Can I use infrared dust correction on black-and-white portraits?
Don’t rely on infrared correction for traditional silver-based black-and-white film. According to LaserSoft Imaging, infrared light can’t pass through this emulsion in the way required. Check whether the software you choose offers another suitable correction method.
What should I check when setting up a scanner or buying one second-hand?
Check the condition of the scanner, the film holders you need and whether the software is supported by your computer. This is particularly relevant for the V600: Epson Netherlands lists the model as discontinued, so check which parts are included with the specific scanner.
When is using a scanning service an alternative to scanning at home?
A scanning service could be a good option if you don’t want to spend time loading film, correcting colours and managing files yourself, for example if you have a large or valuable collection. Ask in advance about the resolution and file format you need, and how dust and scratches will be corrected.
Can I publish scanned portraits online?
Scanning a photo for personal use isn’t the same as publishing it publicly. The Dutch government states that making a private copy of a copyright-protected photo for personal use doesn’t mean you can distribute or publish it. The Dutch Data Protection Authority also describes rules on publishing images of identifiable people and personal data, with a limited exception for exclusively personal or household use. Check the rights and intended audience before publishing.
What warranty applies when buying in the Netherlands?
According to the Dutch government, a purchased product must be of satisfactory quality; there is no fixed statutory warranty period in the Netherlands. The appropriate remedy for a faulty product depends on the circumstances and may include repair, replacement or a refund.