Who is this relevant to?

Groups with maps up to A3

Want to digitise maps themselves, provided they can be laid flat safely, and also print group documents. Check the maximum scan size separately from the print size.

People looking after fragile maps

Have folded, rolled or fragile originals where safe handling and minimal image distortion may matter more than an office workflow.

Groups with varying print needs

Want to print versions or handouts after scanning, and need to weigh up ink costs against how often they print.

What should you consider when choosing?

All-in-one printer with an A3 scanner

Suitable when: the map fits within the confirmed scan size and can be placed safely on the flatbed, and the group also uses the device for printing and copying.

Trade-off: an A3 print specification does not prove that the device can also scan A3 or deliver the required heritage-quality results.

Professional or contactless scanning

Suitable when: maps are larger than the scanning area, contact with the flatbed or lid is not advisable, or geometric accuracy is important, for example for georeferencing.

Trade-off: this option does not automatically meet everyday printing needs. Curvature and the camera angle can also cause distortion when scanning without contact.

All-in-one printer with an A4 scanner

Suitable when: map digitisation is handled separately and the printer is mainly used for A4 documents. Epson specifies A3 printing but A4 scanning for the ET-15000.

Trade-off: you cannot scan an entire A3 map in a single pass with this setup. Also check the running costs against your expected print usage.

Consideration What to look for when buying Relevant consumers
Will the map fit on the scanning area? Compare the map size with the maximum scan size; treat scan size and print size as separate specifications. If we need to fit the whole map in one scan, I compare its size with the scanning area. Around 36% of consumers give top priority to capturing the full map.
Handling fragile originals safely Assess the condition of the paper, any loose pigment and folds, and whether using the flatbed or lid is advisable. Resolution alone does not tell you enough about distortion or suitability for georeferencing. With fragile maps, I want to avoid damage and distracting distortion, even if that means using a different scanning option. Around 29% of consumers put preserving the original first.
Ongoing printing costs For the exact model, compare the compatible ink, stated yield and expected number of prints. A manufacturer’s claim does not guarantee savings for the group. If we regularly print handouts or versions, I weigh ink costs against our usage. Around 21% of consumers give ongoing printing costs top priority.
Shared use Check the available connections, scan destinations and support for the group’s computers. Consider an automatic document feeder separately from the safe handling of historical maps. When several members share scans and printouts, I want to know whether the connection and file workflow suit the way we work. Around 14% of consumers put shared document work first.

Common buying mistakes

  • Confusing A3 printing with A3 scanning

    A printer may print A3 while its scanner is smaller. Epson specifies A3 printing and A4 scanning for the ET-15000.

    Check the maximum scan size for the exact model and compare it with the map’s dimensions.

    If the map does not fit, you may also need a separate scanning option.

  • Handling a fragile map like an ordinary document

    Contact with the flatbed or lid, curvature and the camera angle can affect both the original and the usefulness of the scan.

    First assess the map’s condition and how it will be scanned. For fragile material, consider a professional or contactless option.

  • Comparing only the stated ink yield

    Consumentenbond points out that an inkjet printer may use extra ink for cleaning if it is used infrequently. So the stated yield alone does not determine the group’s running costs.

    Compare your expected print volume, compatible supplies and the basis on which the stated yield was calculated.

  • Overlooking a model’s cartridge requirements

    HP warns that the dynamic security feature on the OfficeJet Pro 9730 may block cartridges with a non-HP chip.

    Factor in this model-specific restriction when weighing up future ink purchases.

    This may limit your choice of cartridges without a compatible HP chip.

Brands to consider

Brother

Brother specifies A3 printing, scanning and copying for the MFC-J6760DW.

  • Brother lists LAN, Wi-Fi and USB, as well as higher-yield cartridges as an option.
  • These model specifications do not indicate how well historical maps will scan. Do not automatically use the document feeder for fragile maps.

Epson

Epson specifies A3 scanning and refillable ink tanks for the EcoTank ET-16655. Scan sizes vary between models from the same brand.

  • The manufacturer lists a 50-sheet input tray for the ET-16655.
  • Epson presents cost benefits as a manufacturer’s claim. According to Epson, the ET-15000 can print A3 but scans A4.

HP

HP specifies an A3/Tabloid flatbed scanner for the OfficeJet Pro 9730.

  • The scanner specified by HP is a flatbed model for the stated size.
  • HP warns that dynamic security may block cartridges with a non-HP chip. This says nothing about independently measured archival quality.

Canon

Canon specifies a flatbed scanner and refillable tanks for the MAXIFY GX7050.

  • The specified flatbed scanner may be suitable for everyday document work.
  • The stated paper and document feeder sizes are designed for A4 and narrower formats. Do not assume that a full A3 map will fit in a single scan.

Joybuy products

These models are suited to maps that fit within the stated scanning area and to everyday group printing. For larger maps, check separate scanning options.

HP Smart Tank 7305 Wireless All-in-One colour printer

HP Smart Tank 7305 Wireless All-in-One

The flatbed scanner can scan maps in colour up to the stated scanning area; larger maps will not fit entirely in a single scan.

Maximum scanning area: 216 × 297 mm.

Wi-Fi and control via the HP Smart app are listed.

View at Joybuy
HP Smart Tank 7005 Wireless All-in-One colour printer

HP Smart Tank 7005 Wireless All-in-One

The flatbed scanner can scan maps in colour up to the stated scanning area; larger maps will not fit entirely in a single scan.

Maximum scanning area: 216 × 297 mm.

Wi-Fi and control via the HP Smart app are listed.

View at Joybuy

Frequently asked questions

Is A3 printing enough to scan an A3 map?

No. Epson specifies A3 printing but A4 scanning for the ET-15000. Compare the maximum scan size for the exact model with the map’s dimensions.

Can you simply put a rolled-up map on a scanner?

No. Curvature can distort the image, and contact with the flatbed or lid may not be suitable for fragile material. Contactless scanning does not automatically eliminate distortion caused by curvature.

What setup works well when several group members use the device?

First decide where scans should be saved and which computers will be used. Brother lists LAN, Wi-Fi and scanning to a PC, app and USB for the MFC-J6760DW. Check that this workflow suits the group’s equipment.

Is an ink tank automatically cheaper if a group only prints occasionally?

No, that does not automatically follow from the type of ink system. Compare the compatible ink with your expected usage; Consumentenbond points out that inkjet printers may use ink for cleaning when they are used infrequently.

Can we publish scans of historical maps on the group’s website?

Not simply because the map is old or because the group has scanned it. According to the Rijksoverheid, permission is required to make copyright-protected work available to the public. In the usual situation, copyright expires 70 years after the creator’s death. Before publishing, check the rights, creator and any collection usage conditions for each map.