Start by choosing a scanner for your film format, then consider how many loading and post-processing steps you’ll want to tackle after a long editing session. A standalone scanner can make capturing images simpler, while a computer-connected film scanner gives you more scope to review and correct your scans. The Dutch Consumers’ Association points out that speed doesn’t automatically mean a more usable image.
Who is this choice relevant to?
Photographers who are short on energy after editing
If you want to capture colour negatives after a long editing session, consider how many steps there are between loading the film and saving the files. The Dutch Consumers’ Association and KODAK Photo Plus product information outline the trade-offs between standalone scanning and ease of use.
35mm photographers who want to edit their scans
If you want to assess colour and detail in each frame, consider a computer-connected film scanner and allow for the extra scanning and correction steps. Plustek describes its OpticFilm models as scanners for 35mm film.
Anyone managing a mixed film archive
If you have negatives in different formats, or aren’t yet sure which formats are in your collection, start by checking the film and the holders you’ll need. Plustek describes the 8300i SE as a 35mm model; Epson also lists 120/220 film for the V600 Photo, but notes that this model has been discontinued in the Netherlands.
What should you look for when choosing?
Start with the format of your negatives, then consider how much manual loading and post-processing you’ll want to do after your session.
| What to consider |
What to look for |
Who is this most important for? |
| Fewer steps |
Check whether you need a computer, how the film is loaded and where the files are saved. |
After a long editing session, I don’t want to go through lots of settings and loading steps again. Around 33% of consumers say minimising the work involved is their main buying concern. |
| Colour and detail |
Look at a sample scan and check which output and correction options are available with the exact model. |
If I want to edit my scans further, I want to assess the colour and detail myself rather than relying on a stated figure alone. Around 27% of consumers prioritise how usable the scan files are. |
| Film format and holder |
Identify the formats in your archive and check which film types are supported and which holders are included. |
With a mixed collection, or one I haven’t catalogued yet, I want to avoid finding that a holder doesn’t fit my film. Around 20% of consumers give format compatibility top priority. |
| Dust correction |
Check whether the model has an infrared channel and how your chosen scan settings affect scanning time. |
If I don’t want another retouching session after editing, I look for dust-correction options and ways to handle the film carefully. Around 13% of consumers say minimising dust removal in post-processing is their main buying concern. |
| Use and cost |
Check which accessories and software you’ll need. If you have a finite collection, you could also compare the cost with using a scanning service. |
If I only have a small collection to digitise, I want to weigh up how useful the equipment will be afterwards. Around 7% of consumers prioritise total cost and continued use. |
Common buying mistakes
-
Assuming every scanner can handle all negative formats
A model for 35mm film isn’t automatically suitable for larger negatives. Epson lists 120/220 film for the V600 Photo, while Plustek describes the OpticFilm 8300i SE as a scanner for 35mm film.
Look at representative strips and check the supported formats and holders for the exact model before choosing.
If a holder doesn’t fit, you may need to use a different scanning option.
-
Assuming a dpi or megapixel figure guarantees image quality
A stated figure describes a specification or setting, but on its own it doesn’t tell you how usable the scan will look for your photos. The Dutch Consumers’ Association describes differences in detail and colour between basic scanners and good film scanners at category level; this isn’t a test of every individual model.
Where possible, assess a sample file and distinguish between the stated scan resolution and the result you can actually see.
You may need to spend more time rescanning or correcting colours.
-
Assuming automatic loading means automatic post-processing
reflecta specifies automatic transport for 3 to 40 frames on the RPS 10S. That doesn’t automatically take care of checking, correcting, naming and saving your files.
Compare the full process for each usable file, not just the loading method or stated scanning time.
Remember to allow time for checking, naming and saving your files.
-
Assuming a discontinued model is readily available new
Epson Netherlands lists the Perfection V600 Photo as discontinued. The condition, holders and software support may vary depending on the specific offer.
Before buying, check the condition of the device, the included parts, the software and the seller.
It may take extra time to find a complete model with usable software.
Brands and scanning options to consider
Plustek
OpticFilm models are computer-connected scanners for anyone mainly looking to digitise 35mm film.
- Plustek specifies 7200 dpi, an infrared channel and 24- or 48-bit colour output for the OpticFilm 8300i SE.
- These are manufacturer specifications. Check that the computer, software and 35mm holder you need suit your workflow.
reflecta
The RPS 10S is a computer-connected option for scanning successive frames on 35mm film strips.
- According to reflecta, its automatic transport can handle strips with 3 to 40 frames. The model also features infrared retouching.
- Automatic loading doesn’t replace the need to check and organise your files. Any stated scanning time applies to the corresponding setting.
KODAK Photo Plus
The EU version of the Slide N Scan with a 5-inch screen offers a standalone option for 135, 110 and 126 colour negatives.
- The product information lists a 14MP sensor and SD storage.
- You feed the film through manually and need to check the saved files afterwards.
Epson
The Perfection V600 Photo is an example of a flatbed scanner for anyone who wants to scan supported 120/220 film as well as 35mm film.
- Epson lists film holders and DIGITAL ICE for this model.
- Epson Netherlands lists the V600 Photo as discontinued. Check the condition and support available for any specific offer.
Related products
Related products coming soon.
Frequently asked questions
Do I have to load each negative individually after a long editing session?
Not with every scanning method: reflecta specifies automatic transport of 3 to 40 consecutive 35mm frames for the RPS 10S. You’ll still need to decide how much checking and file organisation you want to do afterwards.
How should I handle old negatives before scanning?
Work in a clean, dry area and touch the image area as little as possible. The Library of Congress recommends holding photographs by the edges or their sleeves where possible. Be careful when removing dust, as a brush can cause scratches.
Who can help if a scanner bought in the Netherlands is faulty?
If a product is faulty, the seller must offer a solution according to the Dutch government. There’s no fixed statutory warranty period in the Netherlands; what you can expect from a product depends on factors including the product information, price and condition.
Can I share someone else’s scanned photo online?
The Dutch government explains that you can make a private copy of a copyright-protected photo for your own use, but you can’t share or publish it without permission. For the specific photo, check whether it’s still protected and who can give permission.
Can I return a scanner bought online if it isn’t suitable for my film?
For a consumer purchase made online, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind. Exceptions and conditions may apply, so check the information for the specific sale before buying.