Who are these scanning methods for?

Scanner for a small desk

You want to digitise colour negatives at home without a large, permanent setup. Measure the space needed for the device, film feed and, if applicable, a screen or computer before choosing.

35mm photographer who wants to edit images

You mainly scan 35mm colour negatives and value settings and the ability to correct images more than one-touch scanning.

Owner of different film formats

Your collection may include other negative formats as well as 35mm. The holders that actually fit the model you choose will help determine whether it’s suitable.

What should you look for when choosing?

Standalone film scanner

A good fit if: you want to scan colour negatives without a computer and the selected holder suits your film.

Bear in mind: it stores scans on an SD card; according to KODAK Photo Plus, the card required for the KODAK SLIDE N SCAN is not included.

Specialist 35mm scanner

A good fit if: you mainly scan 35mm film and value computer-based settings and editing.

Bear in mind: you’ll need a computer, software and extra space for the film holder; check the system requirements.

Camera or smartphone with a film holder

A good fit if: you already have a suitable camera or smartphone and want to position, for example, 35mm or 120 film.

Bear in mind: the complete setup, alignment and converting the negative afterwards.

Flatbed scanner with a transparency unit

A good fit if: you want to scan paper originals as well as film and have room for a flatbed scanner.

Bear in mind: the larger body; Epson Netherlands lists the Perfection V600 Photo as discontinued.

Have your negatives digitised

A good fit if: you don’t want to use a scanner or set aside a permanent scanning space for your collection.

Bear in mind: you’ll have less direct control over the scans; ask in advance about file formats and any corrections.

Consideration What should you check? Who is this important for?
Workspace and setup Measure the device, film holder and operating space together; include a computer or smartphone holder if needed. If I want a compact scanning space, the film feed needs to fit on my desk too. Around 31% of consumers say workspace is their main consideration.
Colour, detail and editing Check the colour settings, software and file format; where possible, assess a scan of similar film. If I want to assess and correct images carefully, a stated resolution alone isn’t enough. Around 25% of consumers prioritise control over colour and detail.
Workflow and ease of use See how film is loaded, what storage is required and how many steps each scan involves. If I want to work through a whole collection, I want to know what’s involved beyond capturing the image itself. Around 19% of consumers give ease and speed top priority.
Film formats and holders Identify whether you have 35mm, 110, 126 or 120 film, and check which holder is included with the exact model. For my collection of different film formats, a suitable holder is essential, even if other features matter too. Around 13% of consumers name format compatibility as their main requirement.
Scan it yourself or outsource Work out how many images you want to keep and what equipment you already have; if outsourcing, ask about formats and editing. If I want to decide whether scanning my collection myself is the right choice, the equipment I have and the time available also matter. Around 12% of consumers consider this first.

Common buying mistakes

  • Mistaking interpolated megapixels for captured detail

    A higher output resolution achieved through interpolation isn’t the same as capturing more detail with the sensor. reflecta lists a 14MP sensor for the x66-Scan and interpolated output of up to 22 MP; check which figure applies to each setting.

    Compare the sensor information and standard output with interpolated modes. If possible, assess how useful the results are by looking at a scan of similar film.

  • Measuring only the scanner itself

    The film holder, film feed or a camera and smartphone holder may need extra space during scanning.

    Set up a life-size layout in advance, allowing space for operation and film as well.

  • Assuming a product page means the item is currently available

    Epson Netherlands lists the Perfection V600 Photo as discontinued, even though the product specifications are still on the product page.

    For a pre-owned or second-hand model, check the exact model, the film holders included and whether the software is usable.

  • Forgetting that a standalone scanner may need storage

    According to KODAK Photo Plus, the SLIDE N SCAN needs an SD card, which is not included.

    Before buying, check what’s in the box and which type and capacity of card are suitable for the model.

Brands to consider

KODAK Photo Plus

The SLIDE N SCAN is a standalone scanner with a screen for negatives including 135, 110 and 126 formats.

  • According to KODAK Photo Plus, this model scans to SD without computer software.
  • An SD card is required but not included; the manufacturer states that the maximum capacity is 32 GB.

Plustek

The OpticFilm 8300i SE is a computer-based scanner for 35mm negatives and slides.

  • Plustek specifies an infrared channel, 7,200 dpi hardware resolution and included scanning software for this model.
  • Check the software’s computer requirements; no other film formats are listed for this model.

reflecta

The standalone x33-Scan is designed for 35mm film; according to reflecta, the x66-Scan also supports 120 film.

  • According to reflecta, the x33-Scan saves JPEG files to SD and offers manual colour and exposure adjustment.
  • The x66-Scan’s stated 22 MP output is interpolated from a 14MP sensor; that doesn’t mean 22 MP of measured sensor detail.

Lomography

The DigitaLIZA Max is a backlit film holder with a smartphone holder for digitising film with your own phone or camera, not a standalone film scanner.

  • The manual lists holders for 35mm and 120 film.
  • According to Lomography, you’ll need to align your phone and convert the negative afterwards; allow for the complete setup and editing.

Epson

The Perfection V600 Photo is an example of a flatbed scanner for film and paper originals; Epson Netherlands lists the model as discontinued.

  • Epson specifies film holders for 35mm and 120/220 film.
  • The body measures 280 × 485 × 118 mm. The Dutch product page doesn’t confirm that it’s currently available new; for a second-hand model, check the holders and software.

Related products

Related products coming soon.

Frequently asked questions

Do I need a computer-based scanner for colour negatives?

No. Some standalone film scanners can scan to SD without a computer. KODAK Photo Plus and reflecta describe this option for the SLIDE N SCAN and x33-Scan respectively; for a computer-based scanner, check the software and system requirements.

What do I need to get started with a standalone scanner?

First, check that the film holder suits your negatives and find out what storage medium you’ll need. For the KODAK SLIDE N SCAN, KODAK Photo Plus states that an SD card is required but not included.

How can I avoid extra work when scanning?

Allow time to clean and check the film and holders, as well as to make any colour corrections afterwards. The Consumers’ Association (Consumentenbond) lists removing dust and correcting colours as time-consuming steps; the infrared channel specified by Plustek for the OpticFilm 8300i SE doesn’t replace checking the finished file.

When is having negatives digitised an alternative?

Outsourcing may suit you if you don’t want to use a scanner or keep a permanent scanning space. Ask in advance which file formats and corrections are included, and compare this with the equipment and time needed to scan the negatives yourself.

Does a higher megapixel output always mean more captured detail?

No. An interpolated output figure isn’t the same as detail captured by the sensor itself. reflecta lists a 14MP sensor and interpolated output of 22 MP for the x66-Scan; when comparing, check which figure applies to the setting in question.