Which scanner is right for you?

Artists with bound sketchbooks

You want to digitise pages without pressing a thick or fragile spine against glass. CZUR describes its ET series as contactless; check how each model captures an open book and curved pages.

Artists who want to edit their scans

You want to assess the details and colours in your drawings. Compare the scan area and scan a sample using your own paper and materials, rather than relying on a resolution claim alone.

Artists with large sheets or limited desk space

Your choice depends on the size of your open sketchbook and the space available. Canon lists the CanoScan LiDE 400’s maximum document size as 216 × 297 mm; a stand for storage, such as the one supplied with the Epson Perfection V39II, doesn’t automatically take up less space during use.

What should you look for when buying?

Start by deciding how you want to scan your book: without pressure on the spine, flat on glass or using a book-edge scanner. Then check image quality, size and how much room you’ll need while scanning.

What to consider What should you check? Who is this important for?
Protecting the binding Check a sample scan around the inner margin and see how the model handles curved pages. If I’m scanning a thick or fragile sketchbook, I don’t want to press its spine against glass. Around 36% of consumers put protecting the binding first.
Details and colours Scan a sample using the same type of paper, the lighting you want and your intended file settings. When scanning drawings, you want to assess fine lines and colours on your own materials, rather than just look at a high resolution figure. Around 29% of consumers put image quality at the top of their list when buying.
Size of the open book Measure both the page and the open spread, then compare those measurements with the scan area of the exact model. Canon Europe lists the CanoScan LiDE 400’s maximum document size as 216 × 297 mm. If I have large pages or a wide open spread, I want to know in advance what will fit in a single scan. Around 21% of consumers choose primarily based on scan size.
Workspace and routine Check the space needed for the scanner and open book, and review the software requirements for your computer. In a hobby room, the scanner and open sketchbook need to fit together, and the scanning process needs to be practical. Around 14% of consumers prioritise their workspace and routine.

Common buying mistakes

  • Choosing based on dpi or megapixels alone

    A resolution figure alone won’t tell you how your paper, pigments and lighting will look in the scan.

    Compare a sample scan of your own materials and check whether automatic image enhancement gives you the result you want.

  • Confusing A4 size with the size of an open sketchbook

    An open book can take up more space than a single page. Canon lists the LiDE 400’s maximum document size as 216 × 297 mm.

    Before buying, measure both the page and the open spread, and check what the model you’re considering can capture in one scan.

    If your book won’t fit in one scan, scanning separate sections and editing them afterwards can take extra time.

  • Assuming a book-edge scanner is the same as contactless scanning

    The narrow book edge on the Plustek OpticBook 4800 can help you position a page next to the spine, but the page still rests on a flatbed.

    If your book has a fragile binding, choose based on how you’ll need to handle it while scanning, not just on an edge or software feature.

Brands to compare

CZUR

The ET series is worth comparing if you want to scan bound materials from above.

  • CZUR describes the ET series as contactless and says it uses laser-guided page curvature correction.
  • These manufacturer descriptions don’t confirm how accurately colours or the texture of drawing paper will be reproduced. Check the scan size for the specific model too.

IRIS

IRIS offers the overhead IRIScan Desk 7 Pro, among other products.

  • IRIS lists an 18 MP sensor, curved-edge correction and glare-reducing lighting for the Desk 7 Pro.
  • These specifications aren’t a comparative measure of colour reproduction; assess your own drawing materials with a sample scan.

Canon

The CanoScan LiDE 400 is a flatbed option for originals that fit within its stated scan area.

  • Canon Europe lists a maximum document size of 216 × 297 mm and an optical resolution of 4,800 × 4,800 dpi.
  • For a larger sketchbook, or one that’s difficult to lay flat, check separately whether it will fit on the glass without forcing the spine.

Epson

The Perfection V39II is an A4 flatbed scanner for photos and documents.

  • Epson Netherlands lists an integrated stand and a resolution of 4,800 dpi.
  • The stand may make storage easier, but it doesn’t mean you’ll need less workspace when scanning an open book.

Plustek

The OpticBook 4800 is a flatbed alternative if you want to scan bound pages on the glass one at a time.

  • Plustek lists a 2 mm book edge for the OpticBook 4800.
  • Plustek publications for different regions list varying resolutions and system support. Check the exact model and software compatibility.

Joybuy products

This product selection is focused on flatbed scanning of books and bound documents, for anyone who can lay the page on the glass. An overhead, contactless scanner works differently.

Epson WorkForce DS-1660W A4 flatbed scanner

Epson WorkForce DS-1660W

Suitable if you want to scan bound documents on the glass and don’t need a contactless overhead scanner.

A4 flatbed scanner; the product title lists a resolution of 1200 × 1200 dpi.

Joybuy

Frequently asked questions

How can I stop my sketchbook’s spine being put under pressure while scanning?

With an overhead scanner, you place the book open beneath the camera instead of pressing the page against scanner glass. Scan a sample to check the inner margin too: curvature correction is a feature, not a guarantee that every drawing will be captured well in that area.

What space and software should I check before installation?

Measure the space for both the scanner and your open sketchbook, and check the software requirements for the exact model. A storage stand or short camera arm doesn’t, by itself, tell you how much space you’ll need during use.

Am I always entitled to exactly two years’ legal guarantee on a scanner in the Netherlands?

No. According to the Dutch Government, the Netherlands has no fixed statutory guarantee period; what you can expect from a product depends on factors including the product itself and the sales information. If a product is faulty, contact the seller.

Can I post scans of someone else’s drawings online?

Not necessarily. The Dutch Government says you may make a private copy of someone else’s copyrighted work for your own use, but you may not distribute or publish it without the creator’s permission.

Can I always return a scanner bought online within 14 days?

Not always. According to the Dutch Government, when you buy from a business remotely as a consumer, you’ll often have a 14-day cooling-off period, but there are exceptions. Check whether the rules apply to your purchase.