Who is this buying guide for?

Collector with negatives in several formats

You have old portraits and still need to identify their film format. The Consumers’ Association and reflecta explain why choosing the right film holder and format support matters.

35 mm scanner for a small desk

You mainly want to scan 35 mm negatives at home without having to leave a large setup out permanently. The space you have available and whether you need a computer will help determine which workflow is right for you.

Taking care with valuable portraits

You want to consider detail, colour and how to handle delicate originals before you start. The Library of Congress advises not to touch the image area of photographs and to hold them by the edges wherever possible.

What should you look for when choosing?

Start by identifying the film format, then check that the complete scanning setup will fit on your desk. Finally, choose a workflow that suits the level of control and editing you want.

What to consider What should you check? Who is this important for?
Film format and holder Check which film types are supported and which holder is included. reflecta lists support for 120 film up to 6 × 9 cm for the x66-Scan; for 110 and 126 film, reflecta lists a separate adapter set for the x33-Scan. If I still need to identify the format of my old portraits, I want to make sure the strips will fit in the holder. Around 31% of consumers put format compatibility first.
Desk space Measure not just the body, but also the space needed for holders and controls. Epson gives the V600’s dimensions as 280 × 485 × 118 mm and marks the model as discontinued in the Netherlands. If my desk is small, I want to know whether there’ll be enough room for both the scanner and film holder while I’m scanning. Around 25% of consumers put the space required at the top of their list.
Detail and editing Compare optical or sensor resolution with interpolated output. reflecta lists 14 MP for the x66-Scan and an interpolated output of 22 MP; Plustek specifies 7200 dpi optical resolution and an infrared channel for the OpticFilm 8200i SE. When it comes to valuable portraits, I want to know what level of control and editing my workflow allows. Around 25% of consumers give image control top priority.
Workflow and storage Check whether you need a computer and what storage media is required. reflecta lists SD storage for the x33-Scan; KODAK Photo Plus says that an SD card is required for the Slide N Scan Max but isn’t included. If I mainly want to scan quickly and avoid spending ages editing on a computer, I’m looking for a workflow that suits me. Around 19% of consumers prioritise ease of use and time spent.

Common pitfalls

  • Assuming all old negatives are 35 mm

    A 35 mm scanner won’t automatically handle 120 negatives. The Plustek OpticFilm 8200i SE is designed for 35 mm film; reflecta also lists support for certain 120 formats for the x66-Scan.

    Compare a representative strip with the format markings, then check that the scanner and included holder are suitable.

  • Mistaking an interpolated megapixel figure for extra sensor detail

    For the reflecta x66-Scan, the manufacturer distinguishes between a 14 MP sensor image and an interpolated output of 22 MP.

    Compare the original sensor or optical specification and the editing you want to do, rather than relying only on the biggest number on the box.

  • Measuring only the scanner body

    A flatbed scanner may also need space for its controls and for loading film holders. Epson lists the V600’s depth as 485 mm.

    Measure the space available and allow for the whole scanning setup, including holders, cables and any computer.

  • Assuming a discontinued flatbed scanner or camera accessory is a complete new scanner

    Epson marks the V600 as discontinued in the Netherlands. VALOI describes the easy35 v2 as a film holder for use with a camera and macro lens, not as a standalone scanner.

    If you’re considering a V600, check its condition and that all the parts are included. For the easy35 v2, check in advance that your camera, macro lens and connection are compatible.

Relevant brands

reflecta

Standalone scanners for different film formats, including the x33-Scan for 35 mm and the x66-Scan for supported medium formats.

  • According to reflecta, both models mentioned can save scans to an SD card without a computer.
  • The x33-Scan has a 35 mm holder; reflecta lists support for 120 film for the x66-Scan.
  • For 110 and 126 film, reflecta lists a separate adapter set for the x33-Scan. The x66-Scan’s 22 MP output is interpolated.

Plustek

The OpticFilm 8200i SE is a computer-connected film scanner for 35 mm film and slides.

  • Plustek specifies 7200 dpi optical resolution and an infrared channel.
  • Check that the software is compatible with your operating system. The model specifications don’t list support for medium format.
  • Dust and scratch removal is a manufacturer’s claim, not an independent performance test.

Epson

The Perfection V600 Photo is an example of a flatbed scanner with holders for prints, 35 mm film and 120/220 film.

  • Epson lists film holders and DIGITAL ICE.
  • The stated dimensions are 280 × 485 × 118 mm. Epson marks the V600 as discontinued in the Netherlands, so don’t assume it’s readily available to buy new.

KODAK Photo Plus

The Slide N Scan Max is a standalone option for 135, 110 and 126 negatives, among other formats.

  • The European product page lists a 7-inch screen and included film adapters.
  • An SD card is required and, according to KODAK Photo Plus, isn’t included. The product page doesn’t specify this model as a 120 scanner; check the full model name too, as versions vary.

VALOI

The easy35 v2 is a film holder with a light source for copying film using a compatible camera and macro lens.

  • VALOI lists support for 35 mm and smaller formats, with connections for filter thread sizes from 39 to 62 mm.
  • This isn’t a complete solution without a compatible camera and macro lens. Check the filter thread and how negatives are handled.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Can I scan an old portrait print with a film scanner?

Not automatically: a film scanner is designed for film types that are compatible with the scanner and holder. For paper prints, you could look into a flatbed scanner or have the prints digitised individually. The Epson V600 is an example of a flatbed scanner that also supports film, but Epson marks this model as discontinued in the Netherlands.

How should I handle fragile negatives while scanning?

Follow the scanner and film manufacturer’s instructions for loading and cleaning negatives. For paper photographs, the Library of Congress advises not touching the image area and holding the photograph by the edges wherever possible; this advice is specifically for photographs.

If my scanner is faulty, should I contact the manufacturer first?

For a consumer purchase in the Netherlands, the seller must offer a solution if the product doesn’t meet reasonable expectations. The Dutch government states that there’s no fixed statutory guarantee period: what you can reasonably expect depends on the product and the circumstances. A manufacturer’s guarantee is in addition to this.

Can I post scans of other people’s portraits online?

Not necessarily: there’s a difference between making a copy for your own use and publishing or sharing a photograph. According to the Dutch government, you can make a private copy of copyright-protected photographs for your own use, but you can’t share or publish them without permission. Publishing images of identifiable people may also raise privacy issues; the Dutch Data Protection Authority states that, in principle, permission is required to publish other people’s personal data online.