Who is this guide for?

Student with a fragile atlas

You want to capture map pages without forcing open an old binding. The Library of Congress advises assessing whether material can be handled safely before digitising it.

Student with large, loose maps

You want to capture the whole map, including the finer details. Compare your map’s dimensions with the scanning area and imaging capabilities of the exact model.

Student with limited workspace

You may only scan occasionally and want to put the device away afterwards. A foldable model or an existing digital source may be worth considering alongside a fixed A3 flatbed scanner.

What should you consider when choosing?

Start with the condition of the original and the size of the map, then consider detail, workspace and how often you’ll use the scanner.

Foldable overhead scanner for loose maps

Choose this if: you mainly scan flat, loose maps and want to put the device away after use.

Consider: check that small map labels are legible at the size you use; don’t assume it can flatten books without checking the specific model.

Overhead book scanner for atlases

Choose this if: the atlas fits within the scanning area and the binding can be supported safely without forcing it open.

Consider: software correction cannot repair physical damage or guarantee that map details are represented with geometric accuracy.

A3 flatbed scanner for loose sheets

Choose this if: a loose original can safely lie flat on the glass and you have a permanent place to scan.

Consider: the glass bed takes up workspace; don’t flatten a fragile atlas to make it fit.

Existing digital map or reading room

Choose this if: you only need the map occasionally, or you can’t scan the original safely yourself.

Consider: access and suitability depend on the specific map, the institution and your research needs.

What to consider What should you look for? Who should pay particular attention?
Fragile map or atlas binding Assess its condition and check whether it can be captured without pressing the original flat or forcing the binding. If I can’t open an old atlas safely, I don’t want to choose a scanning method that puts pressure on the binding. This is a priority for around 27% of consumers who want to avoid damaging a fragile map or atlas binding.
Full map size Measure the map in both directions, including its edges, and compare those measurements with the scanning area of the exact model. I want to capture the whole map without cropping the edges or taking several separate scans. Around 27% of consumers prioritise fitting the full map into the scan.
Small lettering and details Check a test file for small labels, fine lines and colours, and assess it at the map size you need. If small place names and map lines matter to my research, I want to be able to assess them in the file. Around 20% of consumers prioritise map details.
Workspace and storage Measure the space you’ll need while scanning, as well as the space available to store the device afterwards. I have a small room and want my workspace back after scanning. Around 13% of consumers consider limited space their main concern.
Occasional use First look for the specific map in digital collections, then check whether a reading-room facility is available. If I only need the map once, I want to check whether I really need to buy a scanner. Around 13% of consumers prioritise keeping costs down and want to look into an existing scan or reading-room facility first.

Pitfalls to avoid when scanning maps and atlases

  • Assuming ‘A3’ means it will fit every unfolded map

    A scanner bed has fixed dimensions. A larger map may not fit in a single scan; taking several separate scans takes extra time and you’ll need to stitch them together afterwards.

    Measure the full map in both directions and compare those measurements with the scanning area of the exact model.

  • Confusing book flattening with safe support

    Software image correction doesn’t change the condition of the binding. CZUR positions the Shine for flat, loose pages and describes book-scanning features separately for the ET series.

    First assess whether the binding can be opened and supported safely. Then check which features are available on the exact model.

  • Focusing only on resolution or OCR

    A stated resolution or OCR output doesn’t prove that small map details will be usable in the final image. If the details aren’t legible, you may need to scan the map again.

    Inspect a test file for small lettering, fine lines, colours and complete edges.

  • Buying a scanner before checking for an existing scan

    The KB advises checking whether material is available online. For requested items, the National Archives offers the option to digitise them in its reading room using a book scanner, subject to certain conditions.

    Search for the specific map and edition, then assess whether the existing reproduction meets your research needs.

    An existing scan that meets your needs could mean you don’t need your own scanner for an occasional task.

Brands and models to consider

CZUR

The Shine 800 A3 Pro is an overhead option for flat, loose documents; the ET series is designed for bound material up to A3.

  • CZUR states that the Shine 800 A3 Pro has a resolution of 205 dpi at A3.
  • CZUR describes book-flattening features separately for the ET series. Don’t assume the Shine has this feature based on its model name; check first.

IRIS

According to the manufacturer, the IRIScan Desk 6 Pro is designed for overhead scanning of documents and books up to A3.

  • IRIS lists a 13-megapixel camera for the Desk 6 Pro and says it can save files in formats including image and PDF.
  • You’ll still need a test scan to check whether map lettering, lines and colours are suitable for your needs.

Epson

The WorkForce DS-51000WN is a business A3 flatbed option for originals that can safely lie flat on the glass.

  • Epson Netherlands lists a scanning area of 297 × 420 mm and a scanning resolution of 600 × 600 dpi.
  • A flatbed scanner needs a suitable permanent workspace and isn’t a book cradle for a fragile atlas.

Plustek

The OpticBook 4800 is worth looking into for smaller bound pages where the book edge matters.

  • Plustek lists a 2 mm book-edge design and a scanning area of 8.5 × 11.69 inches.
  • The stated scanning area is smaller than A3. Also check the software support for the exact version.

Joybuy products

This selection is intended for loose, flat historical maps that fit within the scanning area of a foldable overhead scanner.

CZUR Shine 800 A3 Pro

CZUR Shine 800 A3 Pro

This foldable overhead scanner is designed for loose, flat maps. Before buying, check that the whole map will fit within the scanning area.

The product name lists A3 as the maximum size for flat sheets, and mentions OCR and compatibility with Windows and macOS.

CZUR positions the Shine for flat, loose pages. Check the features of the exact model if you also want to scan pages from a bound atlas.

View at Joybuy

Frequently asked questions

How can I tell whether it’s safe to scan an old atlas at home?

First check for tears and folds, and see how far the binding opens without being forced. The Library of Congress advises considering the condition of the material and the risk of damage before starting a digitisation project.

Does OCR make the map itself sharper?

No. OCR recognises text; it doesn’t make the original map image any sharper. Check small place names, lines and colours in the image file at the size you need for your research.

Can I install the scanner software on my computer?

Check the software requirements for the exact model and your operating system. IRIS provides installation instructions for Windows and macOS for the Desk 6 Pro and says the application needs camera access; check any other required permissions too.

What should I check about costs and after-sales support when buying online?

Check the current seller, delivery terms and support for the exact model. The Dutch government says that, in many cases, online purchases from a business come with a 14-day cooling-off period; this is separate from your rights if an item is faulty.

Can I share scans of historical maps with fellow students?

Not automatically just because you scanned the map yourself. The Dutch government says you can make a copy of protected material for your own use, but you can’t distribute it or make it publicly available. Check the rights status of the specific map and any conditions set by the institution before sharing a scan.