Organising a mix of portrait negatives
You may have both 35mm and 120 film, and want to check first that the scanner and its holder can handle your originals.
Start with the format of your negatives, then choose a scanner that supports both the film and its holder: 35mm scanners, flatbed scanners and standalone devices don’t all handle the same types of film. If you want to review scans on a computer, software and film holders are important considerations. Saving directly to an SD card may suit a different workflow, but check the sensor resolution and output format.
You may have both 35mm and 120 film, and want to check first that the scanner and its holder can handle your originals.
You want to review portraits at your workstation, so you’re looking at scan settings, tone and correction options for your type of film.
You want to process lots of images and weigh up whether automatic film transport or saving directly to an SD card better suits your workflow.
First, check the film format and holder. Then decide whether you want to process scans using computer software or capture them directly on the device.
| What to consider | What should you check? | Who should pay particular attention? |
|---|---|---|
| Film format and holder | Check the film types listed for each model and make sure the supplied holder fits your negatives. A 35mm model won’t necessarily support 120 film. | If I have old portraits in different formats, I want to know before buying whether each negative will fit the scanner properly. Around 29% of consumers prioritise film format compatibility. |
| Image detail and output | Compare the sensor or optical specification with any interpolated output, and check which file formats are available. | If I want to preserve or edit portraits, I want to know what the scanner captures and which file I’ll get. Around 23% of consumers prioritise image detail and usable output. |
| Film type and correction | Find out whether you have colour film or traditional silver-based black-and-white film; according to LaserSoft Imaging, infrared correction doesn’t work with traditional black-and-white film. | If my negatives are dusty or delicate, I want a correction method that’s suitable for my film. Around 18% of consumers prioritise careful film handling and damage correction. |
| Processing lots of images | Compare manual feeding with automatic transport or direct capture. Check that your film strips fit in the holder. | If I want to work through a large family archive, I want to know in advance how many times I’ll need to feed film as part of my workflow. Around 18% of consumers prioritise processing speed and ease of feeding. |
| Computer and software | Check that the software, connection and support are compatible with your computer and operating system for the exact model. | If I want to review scans directly on my workstation, I want the software and connection to suit my setup. Around 12% of consumers prioritise computer integration. |
The standalone models listed have a 14 MP sensor and a separate interpolated 22 MP output mode. That output mode doesn’t mean the sensor captures more detail from the film.
Compare the sensor specification with the output mode and, if possible, look at a sample scan that suits how you plan to use it.
LaserSoft Imaging says that silver-based black-and-white emulsion reflects infrared light, so infrared correction cannot be used with it.
First check which type of film you have. For traditional black-and-white film, look for suitable software-based correction. The Library of Congress recommends clean, well-fitting nitrile gloves when handling film directly.
Epson Netherlands lists the Perfection V600 Photo as discontinued. An existing specification page therefore doesn’t confirm that the model is currently available.
If you find a specific offer, check the condition of the device, the film holders included and the software.
Plustek says the OpticFilm 8200i SE is designed for 35mm negatives and slides, and comes with SilverFast SE Plus.
reflecta offers different workflows: the x66-Scan can be used as a standalone device, while the RPS 10S is a computer-connected scanner for 35mm strips.
The Slide N Scan is a standalone scanner for supported 135, 110 and 126 negatives, as well as compatible slides.
The Perfection V600 Photo is a flatbed scanner with a film unit; Epson Netherlands lists the model as discontinued.
No, a 35mm film scanner doesn’t necessarily support 120 film. Check both the film formats listed and the compatible holder for the exact model. The Plustek OpticFilm 8200i SE is designed for 35mm film; Epson also lists 120/220 film for the Perfection V600 Photo, while reflecta lists certain 120 formats for the x66-Scan.
Handle film carefully and make sure your hands and work area are clean. The Library of Congress recommends clean, well-fitting nitrile gloves when handling film directly; gloves don’t replace careful use of the holder.
Not necessarily: according to the Dutch Government, you’re entitled to a product of satisfactory quality, but there’s no fixed statutory warranty period in the Netherlands. If a product is faulty, you should be able to contact the seller. So compare the cost of an additional paid warranty with the rights you already have.
Not necessarily. According to the Dutch Data Protection Authority, personal use and sharing within a very limited circle are covered by the household exemption, but wider public sharing isn’t. Whether you’re allowed to publish a particular old portrait also depends on factors including copyright, portrait rights and the circumstances in which the photo was taken. Scanning a photo doesn’t in itself give you the right to publish it.