Who are these pedals for?

Sharing a bedroom

You want to be able to move or put the pedals away after use without disturbing anyone else. Measure the space available and check for movement and noise on your own floor; anti-slip features don’t tell you how noisy the pedals will be.

Formation flyer

You want to make small rudder corrections with precision, so look at centring, resistance and the adjustment options in your simulator. Manufacturers describe these features for each model, but this isn’t an independent performance test.

Simulator user with a permanent setup

You want to know which cable, adapter or intermediary controller you’ll need to use the pedals with your existing PC or console setup. Check the connection method for the specific model.

What should you look for when choosing?

In a shared bedroom, available space, stability and noise on your floor are practical considerations. Also check that the controls and connection work with your simulator setup.

What to consider What should you check? Who is this important for?
Noise and stability Check how well the base stays in place on your floor and listen to the pedals in use; a description of smooth movement doesn’t guarantee quiet operation. If I want to practise without disturbing my flatmate, I’ll check noise and movement on my own floor. Around 33% of consumers prioritise this concern.
Space and storage Measure the width and depth, allowing room for your feet and chair. Compare the base dimensions, not just the pedal width. If space under my desk is limited, I want to know whether the set will fit and can be stored away after use. Around 27% of consumers prioritise the space needed for the setup.
Rudder controls Check whether the set has a rudder axis and what resistance or spring adjustments and calibration options are available. For small corrections during virtual formation flying, I want to adjust the rudder feel to suit my preferences. Around 20% of consumers prioritise adjustable rudder feel.
Connection Check your platform, connector, included adapter and whether an intermediary controller is required. If I want to keep using my existing PC or console setup, the connection method needs to work with my equipment. Around 20% of consumers let connection compatibility determine their choice.

Things to watch out for when buying

  • Assuming smooth movement means quiet operation

    Manufacturers describe the mechanisms and anti-slip features, but that doesn’t tell you how much noise the pedals or your floor will make in a shared bedroom.

    Check the noise on your own floor, at the time you plan to practise. Don’t assume the pedals will be quiet just because the mechanism is described as smooth.

  • Confusing pedal width with the total space required

    The stated pedal width doesn’t tell you how much room the whole set, your feet and your chair will take up. Turtle Beach describes adjustable pedal width; Honeycomb also gives the base dimensions for the Charlie.

    Measure the available width and depth, and allow enough room for your feet and chair.

  • Assuming Xbox compatibility means a direct connection

    For full Xbox compatibility with the VelocityOne Rudder, Turtle Beach specifies a connection through VelocityOne Flight with suitable firmware.

    Before buying, check which intermediary controller and firmware your setup requires.

    You may need a suitable controller you already own or additional hardware.

  • Choosing a single-axis set when you also expect toe brakes

    VIRPIL describes the ACE-Torq as single-axis. A rudder axis is not the same as separate left and right toe-brake axes.

    If you want to use both functions, check that the set has a rudder axis as well as separate toe brakes.

Brands worth comparing

Thrustmaster

The TFRP is a set with a rudder axis on sliding rails and separate toe brakes.

  • Thrustmaster describes four aluminium sliding rails. The manual lists RJ12/USB connection options on PC.
  • Console connectivity depends on a compatible controller; don’t assume every joystick will work as an intermediary. The stated rail design doesn’t prove that the set is quiet.

Logitech G

Flight Sim rudder pedals for PC users looking for adjustable resistance and separate toe brakes.

  • Logitech G lists a tension adjuster, adjustable footrests and anti-slip material.
  • These are manufacturer descriptions, not independent measurements of precision, grip or noise.

Turtle Beach

The VelocityOne Rudder is designed for people who want to adjust pedal width and spring settings.

  • Turtle Beach describes six pedal-width settings from 350 to 450 mm and a USB connection to PC.
  • For full Xbox compatibility, Turtle Beach specifies a connection through VelocityOne Flight with suitable firmware.

Honeycomb Aeronautical

The Charlie is an option for those who want to adjust pedal angle, tension and toe brakes.

  • Honeycomb Aeronautical lists a base measuring 498 × 457 mm; check that it will fit under your desk.
  • The manufacturer mentions Hall-effect sensors and grip features, but these don’t prove that the pedals operate quietly.

VIRPIL

The ACE-Torq has an adjustable rudder axis for those who don’t need separate toe-brake axes.

  • VIRPIL describes a single-axis design with an adjustable damper and springs.
  • This set isn’t the same as a version with separate toe-brake axes; check which features you need.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect these pedals directly to an Xbox?

It depends on the model and how it connects. For full Xbox compatibility with the VelocityOne Rudder, Turtle Beach specifies a connection through VelocityOne Flight with suitable firmware. Thrustmaster documents connections to certain of its own controllers for the TFRP; the manual also describes an RJ12/USB connection for PC.

What should I do after adjusting the pedal width on the VelocityOne Rudder?

Recalibrate the rudder axis according to Turtle Beach’s instructions. The company recommends setting both pedals to the same width, restarting the device, then moving the rudder axis all the way to both ends.

Do I need separate toe brakes to practise flying in formation?

Not for the rudder axis itself: toe brakes control a different function in the simulator, such as braking on the ground. If you also want to brake independently while taxiing, check that both brake axes are included. VIRPIL describes the ACE-Torq as single-axis, while Thrustmaster documents separate brake axes for the TFRP.

What are my rights if pedals bought online aren’t suitable or develop a fault too soon?

According to ACM ConsuWijzer, consumers who buy online generally have a statutory 14-day cooling-off period after delivery; check the terms and any exceptions that apply to your purchase. The seller is also responsible for the statutory guarantee if the product doesn’t meet what you could reasonably expect. In the Netherlands, there is no fixed period that applies to every product.

Is a CE logo on a product page enough to prove that a product is safe?

No. A CE logo on its own doesn’t tell you which requirements apply to a specific product. The European Union explains that CE marking is mandatory for products covered by specific harmonised rules, and that the manufacturer is responsible for meeting the applicable requirements. So check the documentation for the product you want to buy.