Who are these pedals for?

Flight sim enthusiasts with limited legroom

If you fly under a small desk, don’t just measure the space for the pedal base. Check that your feet and knees have room throughout the full pedal movement, too. VKB FSC Europe describes the T-Rudder Mk.V as a compact set, while Honeycomb Aeronautical gives the dimensions of the Charlie Rudder Pedals.

Those practising simulated crosswind landings

For foot control on approach, the pedal movement needs to be assigned to the yaw or rudder axis in your simulator. Laminar Research’s X-Plane explains how to set up this axis. Separate brake controls become important if you also want to practise after landing.

Flight sim enthusiasts with an existing PC or Xbox setup

If you want to add pedals to your existing equipment, it’s worth checking the entire connection setup first. Thrustmaster, Turtle Beach and Honeycomb Aeronautical specify an adapter, controller or hub as part of the connection setup for certain models.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Fit in a compact cockpit Measure the width, depth and legroom in the position you’ll use the pedals. VKB FSC Europe describes the T-Rudder Mk.V as compact; Honeycomb Aeronautical lists the Charlie Rudder Pedals’ dimensions as 498 × 457 × 210 mm. If space is limited, I want my feet and knees to move freely, not just the base to fit on the floor. Around 33% of consumers put available space first.
Assignable rudder control Check whether your simulator lets you assign pedal movement to yaw, then test the direction, centre point and full range of movement after connecting the pedals. Laminar Research’s X-Plane explains how to assign pedal movement to yaw. If I’m practising crosswind landings, I want my foot movement to control the intended rudder input. Around 27% of consumers put rudder control at the top of their list.
Connection to your platform Check whether you’re using a PC or Xbox, and confirm the controls, adapter and cable setup required for the exact model. The Thrustmaster manual describes an RJ12 connection through compatible controls or an RJ12/USB adapter; for Xbox use of the VelocityOne Rudder, Turtle Beach specifies the VelocityOne Flight Universal Control System. If I want to keep my existing PC or Xbox setup, I want to know in advance what else I’ll need to use the pedals. Around 20% of consumers put compatibility with their platform first.
Separate braking after landing Check whether the set has separate left and right brake axes and whether your simulator can assign them separately. Thrustmaster and Logitech G describe differential braking on the models mentioned; according to its specifications, the VKB-Sim T-Rudder Mk.V has one analogue axis. If I also want to practise the landing roll or taxiing, I want to control the left and right brakes independently. Around 20% of consumers put separate braking at the top of their list.

Common buying mistakes

  • Assuming compact rudder pedals also have toe brakes

    According to its specifications, the VKB-Sim T-Rudder Mk.V has one analogue axis. A compact design doesn’t mean you’ll also get separate left and right brake axes.

    Decide in advance whether you only need the rudder axis or also want separate brake controls. Check the axis layout of the exact model.

    For separate braking, you may need different controls or a different set of pedals later on.

  • Confusing Xbox compatibility with a direct connection

    For Xbox use of the Turtle Beach VelocityOne Rudder, the manufacturer specifies a VelocityOne Flight Universal Control System. Honeycomb specifies an Alpha XPC and Xbox Hub for the Charlie Rudder Pedals.

    Compare the complete connection setup with the equipment you already own, and check which components are included with the model on offer.

    You may need to buy additional equipment if a compatible controller or hub is required.

  • Measuring only the space for the pedal base

    In a compact cockpit, there may be less room for your feet and pedal movement than the floor space taken up by the base.

    Measure the width, depth and legroom in the position you’ll use the pedals. Compare these with the dimensions and adjustable width of the exact model.

Brands to compare

VKB-Sim

The T-Rudder Mk.V is worth considering if a compact design matters more to you than built-in separate toe brakes.

  • VKB FSC Europe describes it as compact and says it comes with a BlackBox Mk.3.
  • The set has one analogue axis; according to the supplier, older BlackBox Mk.1 and Mk.2 versions aren’t compatible with the Mk.V.

Thrustmaster

The T.Flight Rudder Pedals combine a rudder axis with differential braking. Check that the connection setup works with your existing controls.

  • Thrustmaster lists sliding rails, differential braking and removable heel rests.
  • The RJ12 connection means you’ll need to check which controls or adapter are required, and what’s included in the box on offer.

Logitech G

The Flight Sim Rudder Pedals are a PC-focused option if you’re looking for adjustable footrests and separate brake controls.

  • Logitech G lists adjustable damping, adjustable footrests and independent left and right brake controls.
  • These features alone don’t show whether the set will fit in a specific compact cockpit.

Turtle Beach

The VelocityOne Rudder is worth considering if adjustable pedal width or compatibility with a suitable PC or Xbox setup is important to you.

  • Turtle Beach lists interchangeable springs, differential braking and adjustable width.
  • For Xbox use, Turtle Beach specifies the VelocityOne Flight Universal Control System. After adjusting the width, the manufacturer recommends restarting and recalibrating the set.

Honeycomb Aeronautical

The Charlie Rudder Pedals are an option if you’re looking for adjustable tension and can fit the stated dimensions into your cockpit.

  • Honeycomb lists Hall effect sensors, adjustable tension and dimensions of 498 × 457 × 210 mm.
  • For Xbox use, Honeycomb specifies an Alpha XPC plus an Xbox Hub. In a compact cockpit, also measure the space your feet need while using the pedals.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I check that my rudder and brake pedals are set up correctly?

Move the pedals in your simulator’s settings and assign the moving axis to yaw. If your pedals have separate left and right toe brakes, assign those separately. Then check that the direction is correct. This is the configuration method described for X-Plane by Laminar Research; menus may vary in other simulators.

Can I connect the Turtle Beach VelocityOne Rudder directly to an Xbox?

No, it can’t be connected directly to an Xbox on its own: Turtle Beach specifies that it must be used with the VelocityOne Flight Universal Control System. For your own setup, also check which equipment is included with the model on offer.

Do I need to recalibrate the VelocityOne Rudder after changing the pedal width?

Yes. Turtle Beach recommends switching the set off and on again after adjusting the width, then moving the rudder axis through its full range to capture new calibration data.

What rights do I have in the Netherlands if rudder pedals I bought online don’t fit or are faulty?

For online purchases by consumers, you generally have a statutory 14-day cooling-off period from the date the product is delivered, subject to legal exceptions. If the product is faulty, the seller remains responsible for the statutory guarantee; any additional manufacturer’s commercial guarantee doesn’t replace it. The Netherlands Authority for Consumers and Markets explains these rights.

Do electronic rudder pedals need a CE marking in the Netherlands?

Electronic products placed on the market must comply with the applicable European rules, but a CE marking is only required for product groups covered by that requirement. The Dutch government’s business portal explains that you can’t tell whether every set of pedals is subject to the same marking requirement without assessing the specific product. If in doubt, ask for the documentation for the exact model.