Who is this guide for?

Lecture viewer with a weak signal

Does your connection keep dropping out, mainly at your usual spot at the end of the corridor? Compare the Wi-Fi there with a connection over an Ethernet cable; the Consumers' Association recommends using a wired connection for a speed test.

Cable user with a distant viewing spot

If you can run an Ethernet cable to the corridor, you can look into whether a wired access point or mesh nodes connected by cable would suit your needs. TP-Link and ASUS describe Ethernet connections for the mesh products mentioned here.

Viewer who can't run a cable

If running a cable isn't an option, consider where a wireless intermediate node can still get a good connection to the main node. The Consumers' Association recommends placing a Wi-Fi extender closer to the middle of the home if the signal is weak at the back.

What should you look for when buying?

Start by measuring the signal and improving the router's position. Only then choose between an extra wired access point, wireless mesh or a new standalone router.

Concern What to look for when buying Who is this important to?
Signal at your viewing spot Measure the signal where you watch the lecture and first try moving the router to a better position. Then decide whether you need an extra node. If I'm watching a lecture at the end of the corridor, I want to know whether the Wi-Fi there is reliable enough. Around 40% of consumers prioritise signal at their viewing spot.
A stable connection during the lecture Check whether you can run a cable. If you choose wireless mesh, decide where an intermediate node can still maintain a good connection to the main node. I want to watch the live lecture without a weak connection between Wi-Fi nodes slowing things down. Around 30% of consumers prioritise an uninterrupted lecture.
Practical installation Check the cable route, available ports and whether the equipment you want supports access point mode. If I want to put a node in the corridor, its connections need to suit what I can install there. Around 20% of consumers prioritise an installation that is practical to carry out.
Cost and maintenance First, see whether moving your existing router helps. If you buy new equipment, also check how updates are provided. I want to avoid buying new equipment if moving the router would do the trick, and then know how to maintain it. Around 10% of consumers prioritise keeping purchase and maintenance costs down.

Common buying mistakes

  • Assuming the stated maximum speed or coverage guarantees a signal in the corridor

    Distance and obstacles affect the signal at your viewing spot; a product specification can't tell you how well the signal will reach it.

    Measure the signal where you watch, and first check the router's position and the connection between any Wi-Fi nodes.

  • Putting a wireless intermediate node where the signal is already weak

    The intermediate node relies on its connection to the previous node. A weak connection there can limit the signal at your viewing spot.

    Try a position where the intermediate node can still maintain a good connection to the main node, or use a cable if possible.

    Without a suitable position, you may still need an extra node or a cable.

  • Assuming a similar model name means it's the same set

    A different version may have a different number of units or different connections from the one you need.

    Check the full model name, number of units, connections and included power supply for the exact version.

Brands to consider as a reference

The features listed apply to the product ranges and versions described; they don't, in themselves, tell you which system will work in your corridor.

TP-Link

The Deco X50 range is an expandable mesh system, with Ethernet backhaul described as an optional feature.

  • TP-Link lists three gigabit ports per Deco X50 unit.
  • The stated coverage area doesn't guarantee a signal in your corridor; also check the exact version and number of units.

ASUS

The ASUS ZenWiFi BD4 is described as a dual-band Wi-Fi 7 system with access point mode.

  • ASUS lists two 2.5G ports for the BD4.
  • Tweakers reports that BD4 nodes placed wirelessly can lose a lot of throughput and perform better when wired. This finding doesn't automatically apply to other ASUS models.

FRITZ!

The FRITZ!Mesh Set 1700 is described as a set that can connect via LAN to an existing router or fibre-optic modem.

  • FRITZ! lists automatic updates and expandability for this set.
  • The Wi-Fi connection described applies when used with a FRITZ!Box; check that the connection method you want is compatible with your current router.

Our picks at Joybuy

The options below range from a standalone router and Wi-Fi extender to mesh sets. Compare them with your cabling options and the spot where you watch the lecture.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 system

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

A mesh option to consider if you can run a cable to the corridor and want to connect the Wi-Fi nodes by cable.

The product description lists wired backhaul and two 2.5G Ethernet ports per unit.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

A standalone router to consider if your measurements and a better position suggest that replacing your existing router is the right choice.

The product information lists AiMesh expansion, dual-band Wi-Fi 6 and three gigabit Ethernet ports.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh set with three units

TP-Link Deco X50 Wi-Fi 6 mesh set, 3-pack

A set with several mesh nodes to consider if you want to extend Wi-Fi across different areas.

The product information lists three units and three gigabit ports per unit.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

A Wi-Fi extender to consider if you want to extend your existing wireless network and have a socket in a suitable position.

The product description lists 2.4 GHz, two external aerials and a stated maximum of 300 Mbps.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A mesh option to consider if you want several units to work together and would like to manage your network through an app.

The product description mentions set-up and management through the HUAWEI SmartLife app.

View at Joybuy

Frequently asked questions

How can you tell whether you need a new router?

First, compare a speed test over an Ethernet cable with the Wi-Fi at your viewing spot. If the wired connection is repeatedly too slow as well, contact your provider; a different Wi-Fi router won't fix the problem on its own. If the Wi-Fi is weak mainly at a distance, first try moving the router or adding another node.

Where should you put a wireless mesh node?

Don't put it where the signal has already dropped out. Choose a spot where it can still maintain a good connection to the previous node. If the signal is weak at the back of the home, the Consumers' Association recommends placing it closer to the middle.

What maintenance does your router need?

Keep its firmware up to date. Safe Internet Use recommends checking whether updates are available through the app or supplier, and enabling automatic updates when possible.

Are you entitled to exactly two years' warranty in the Netherlands?

No, the Netherlands has no fixed statutory warranty period. According to the Government of the Netherlands, a product must meet what you can reasonably expect of it for a reasonable period; a manufacturer's warranty is an additional benefit. If a product is faulty, contact the seller.

Do you need a permit to use Wi-Fi at home?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi is licence-exempt if you use the designated frequencies and comply with the conditions of use.