Working at the end of the corridor
You want to connect to your existing file storage from there. The Consumentenbond recommends considering where you need the signal when improving Wi-Fi coverage.
You don’t automatically need to buy a new router: first check the signal at your workspace and the connection to your existing network. If you can run a cable, compare a wired access point or mesh system with Ethernet backhaul. Without a cable, wireless mesh is only an option if the point between the router and your workspace still has a good connection. Also check that your existing file storage and access permissions are set up correctly.
You want to connect to your existing file storage from there. The Consumentenbond recommends considering where you need the signal when improving Wi-Fi coverage.
You regularly transfer large files and want to see whether you can connect your workspace, storage or mesh points by cable. The Consumentenbond notes that a network cable is one option for large downloads.
You want to manage access for employees and guests properly, and check how your router and devices receive updates. The Consumentenbond points out that network access can also affect access to shared files and devices.
Choose this when: you can run a network cable to, or close to, the end of the corridor and your current network otherwise meets your needs.
The trade-off: you’ll need to arrange the cable and, if necessary, a power supply; the access point won’t replace your modem router on its own.
Choose this when: you want several Wi-Fi points and can run a cable between them.
The trade-off: you’ll need several devices and a cable; check how many ports are available on each point.
Choose this when: running a cable isn’t practical and there’s a spot between the router and workspace where an extra point will still get a good connection.
The trade-off: placement and the wireless connection between points remain crucial.
Choose this when: you’ve established that the current device or its placement is the problem, and one device can cover the corridor.
The trade-off: a new router won’t automatically overcome the distance or obstacles in the corridor.
| Factor | What to check before buying | Who should pay particular attention? |
|---|---|---|
| Coverage at your workspace | Check the signal at the end of the corridor and where you plan to put each wireless point. | If I work at the end of the corridor, I want a usable connection there, and the point between the router and my workspace needs to have coverage too. Around 36% of consumers give coverage at their workspace top priority. |
| Transferring large files | Check whether your computer, storage or mesh points can be connected by cable; compare the ports on the exact model. | For large project files, I want to know whether my equipment and mesh points can be connected by cable, not just the stated Wi-Fi speed. Around 29% of consumers prioritise file transfers. |
| Secure access | Check encryption, updates, guest access and permissions for your file storage; older devices don’t always support WPA3. | When employees and guests use the network, I want to know who can access shared files and devices. Around 21% of consumers start by looking at access security. |
| Connecting to your existing network | Check whether you want to use an access point or mesh alongside your existing router, and what connections and power supply are needed. | If my current network otherwise meets my needs, I want to expand it appropriately and check the required connections and power supply in advance. Around 14% of consumers prioritise how well it fits with their existing setup. |
Your connection at the workspace also depends on where the equipment is placed and whether each wireless point has a good signal. A product claim isn’t a measurement of your corridor.
Check the signal at your workspace and where you plan to place each wireless point before deciding how many points you need.
Better Wi-Fi coverage won’t automatically control who can open project files. The Consumentenbond points out that network access can also give people access to shared files and devices.
Check your existing storage, file permissions and guest access as well as your Wi-Fi setup.
According to TP-Link, the Deco X50-PoE supports power via IEEE 802.3at or IEEE 802.3bt; IEEE 802.3af isn’t supported.
Check the PoE standard and connections required for the entire setup. If you’re using PoE, you may need a suitable switch or injector.
PoE power may require a suitable switch or injector and a network cable.
The Deco X50 is a mesh option; the separate X50-PoE range is worth considering if you want to place a Wi-Fi point using a suitable PoE power supply.
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh model with a wired backhaul option.
The FRITZ!Repeater 3000 AX is worth considering to extend a compatible existing network, rather than as a standalone replacement for every modem router.
The UniFi U6+ is a wired Wi-Fi 6 access point to consider if you can run a cable to the corridor.
This selection from Joybuy features mesh kits for extending Wi-Fi coverage with multiple points. Before buying, check the CE marking and applicable EU radio equipment requirements for the exact model.
No image available
Worth considering if you’re looking at a mesh setup with wired backhaul and 2.5-gigabit connections.
ASUS lists dual-band Wi-Fi 7, two 2.5-gigabit ports and a wired backhaul option for the BD4.
No image available
This mesh kit may suit you if you want to use several points; check that each wireless point still gets a connection where you plan to place it.
The product description lists three mesh units, optional Ethernet backhaul and three gigabit ports per unit.
No image available
Worth considering if you’re looking at a mesh kit with PoE power and can arrange the required power supply at the installation point.
The product name specifies dual-band Wi-Fi 6, and the product description lists two mesh units. According to TP-Link, PoE power requires 802.3at or 802.3bt; 802.3af isn’t supported.
No image available
This mesh kit may be worth considering if you want to place several points; the connection at each intended location still matters.
The product description lists three units, tri-band Wi-Fi 6E (2.4 GHz, 5 GHz and 6 GHz) and three gigabit ports per unit.
No image available
Worth considering if you want to compare a two-point mesh kit with the option of wired backhaul.
The product name specifies dual-band Wi-Fi 6; the product description lists two units, optional Ethernet backhaul and three gigabit ports per unit.
Not necessarily. First check the connection in that spot and where your current device is placed; an extra access point or mesh point may be a better fit. Also check your existing file storage and access permissions separately.
Place it somewhere it can still get a good connection to the network, rather than automatically at the very end of the corridor. If you can run a cable, compare a wired backhaul option.
Only if you want to power the device via PoE: TP-Link specifies IEEE 802.3at or IEEE 802.3bt and rules out 802.3af. The manufacturer also says that a DC adapter is included; check what comes with the exact model.
According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi is generally licence-free within the designated frequencies and conditions of use, with no notification or registration required. However, equipment placed on the EU market must still meet the applicable radio equipment requirements and carry the CE marking.
Check that the exact model complies with the applicable EU radio equipment requirements and has the required CE marking. Also make sure the solution suits your existing network, available cabling and power requirements.