Start by working out where your seminar call is struggling. If Wi-Fi is good where you work, a single router with the right connections may be enough. If coverage is poor in other rooms or on another floor, a mesh system is another option. Also check your internet connection’s upload speed, the Wi-Fi capabilities of older devices and how the router connects to your provider’s equipment. A higher advertised Wi-Fi speed won’t resolve these limitations on its own.
Who should consider this choice?
Someone with a stuttering call
Wants to be clearly heard during seminars and find out whether the issue lies with their workspace, upload connection or simultaneous use of the home network. Zoom explains that bandwidth use adjusts to the network connection.
Someone calling from beyond good Wi-Fi coverage
Joins a seminar from a room or floor where the current Wi-Fi access point doesn’t provide enough coverage, and is weighing up moving it against adding access points or using a network cable. The Consumers’ Association discusses coverage as a consideration when extending Wi-Fi.
Someone managing a mixed home network
Wants to connect laptops, phones and older devices while also considering connections and updates. The Consumers’ Association notes that older Wi-Fi devices don’t automatically benefit from Wi-Fi 6 improvements; VeiligInternetten recommends setting up router updates where possible.
What should you look for?
One router connected to your existing modem
Choose this option: if you already have good Wi-Fi coverage where you hold seminars and want to replace a router or add more wired connections.
Bear in mind: a single router won’t automatically fix a weak signal in a distant room. Also check how it connects to your provider’s equipment.
Mesh for multiple rooms or floors
Choose this option: if your seminar space is outside the current access point’s good coverage and you can position additional access points.
Bear in mind: a mesh system requires multiple devices and careful positioning. A wired connection between units is only an option if you can run a network cable.
Keep your current provider router
Choose this option: if you haven’t yet worked out whether disconnections are caused by Wi-Fi coverage, congestion on your home network or your internet connection.
Bear in mind: this could prevent an unnecessary purchase, but it won’t extend coverage if your current setup has a weak-signal area.
The right choice depends on where your connection is falling short and which devices are using your home network at the same time.
| Consideration |
What should you check? |
Who should prioritise this? |
| Stable seminar call |
Test the connection in your usual seminar space, check your upload connection and see whether you can connect your computer via Ethernet. |
If my call stutters during a seminar, I want to know whether the cause is my workspace or internet connection. Around 36% of consumers prioritise a reliable call. |
| Coverage in your seminar space |
Check where the signal is weak, how many units a mesh system includes and whether Ethernet backhaul is possible in your home. |
If my workspace is on another floor or in a distant room, I want enough coverage there. Around 29% of consumers give coverage top priority. |
| Older and newer devices |
List the Wi-Fi standards supported by your main devices and compare them with the bands and connections on the exact router model. |
If people in my household use devices from different generations, I want to connect them to the network without assuming that every device will get the same improvements. Around 21% of consumers prioritise compatibility. |
| Connection and management |
Decide whether you need a router connected to your existing modem or a replacement modem; check for updates and the CE marking on the version being sold. |
If I install a router myself, I want to know how it connects to my provider’s equipment and how to keep it updated. Around 14% of consumers give installation and management top priority. |
Common pitfalls
-
Confusing combined Wi-Fi speed with the speed of a single seminar call
A stated band speed doesn’t tell you on its own how well a call will work. The connection also depends on the device you’re using, coverage in your workspace and the internet connection available.
First work out where the connection is falling short, then compare the specifications that address that limitation.
-
Buying a single router to fix a coverage problem on another floor
A router next to your modem won’t automatically fix a weak signal in a distant area. A mesh system uses additional access points; TP-Link also lists optional Ethernet backhaul for the Deco X50.
Compare setups where the problem occurs and check how many mesh units you need and whether you can run cables between them.
-
Assuming Wi-Fi 6 or a similar model name guarantees compatibility
Older devices don’t automatically benefit from Wi-Fi 6 improvements. ASUS also lists differences between hardware versions of the RT-AX58U.
Check the Wi-Fi standards supported by your devices and compare the full model name and hardware version of the product being sold.
Brands to compare
TP-Link
TP-Link offers the Archer AX55 as a single-router option and the Deco X50 as an expandable mesh setup.
- TP-Link lists Wi-Fi 6 on 2.4 and 5 GHz for the Archer AX55; for the Deco X50, the manufacturer describes optional Ethernet backhaul.
- These are manufacturer specifications, not measurements of seminar call performance. Check the version and how many units are included in the set.
ASUS
The Dutch specifications page for the RT-AX58U lists several operating modes, which may be useful if you want to change your existing network setup.
- ASUS lists router, access point and AiMesh node modes, as well as four gigabit LAN ports.
- Specifications vary between V1 and V2; check the hardware version being sold before comparing features.
FRITZ!
FRITZ! describes the FRITZ!Box 4060 as a router for use with an existing modem, with mesh expansion and telephony features.
- According to the manufacturer, the 4060 has one 2.5-gigabit WAN port and three gigabit LAN ports.
- The manufacturer describes this model as being designed to connect to a modem. Check that it’s suitable for your provider’s equipment; don’t assume it will connect directly to every internet line without checking first.
Joybuy products
This selection includes a single router and mesh systems for extending Wi-Fi coverage across multiple rooms. Check which setup suits your home and devices.
No image available
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, 2.4 GHz / 5 GHz, white, 2 Internal
A mesh system to consider if you want to extend Wi-Fi coverage around a seminar space beyond your current range.
Dual-band Wi-Fi 7 (802.11be); 2.4 GHz and 5 GHz.
View at Joybuy
No image available
ASUS RT-AX52 AX1800 dual-band router, gigabit Ethernet, black
A router to consider if you already have good coverage in your seminar space and want a single router connected to your existing provider equipment.
Dual-band: 2.4 GHz and 5 GHz.
View at Joybuy
No image available
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6
A mesh system to consider if you want to extend Wi-Fi coverage to several areas of your home.
3-pack; dual-band 2.4 GHz / 5 GHz; Wi-Fi 6 (802.11ax).
View at Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router
A mesh router to consider if you want to extend Wi-Fi coverage. Check that the version being sold suits the setup you need.
Dual-band Wi-Fi 7.
View at Joybuy
No image available
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router
A mesh router to consider if you want to extend coverage and have devices with different Wi-Fi standards at home.
Dual-band Wi-Fi 6.
View at Joybuy
Frequently asked questions
Can a new router fix an internet connection that’s too slow for a seminar?
Not on its own. Zoom lists different recommended upload and download speeds for its web app depending on the video mode, and adjusts bandwidth use to suit the connection. So check your internet connection and the conditions during the call, not just the router’s advertised speed.
Can I use my own router in the Netherlands?
Yes. According to ACM ConsuWijzer, you’re free to choose your router. Connecting your own modem directly may be subject to additional technical and security requirements. Ask your provider for the settings you need, and first decide whether you need a router connected to your existing modem or a replacement modem.
How can I keep my own router secure?
Check for firmware updates and enable automatic updates if possible. VeiligInternetten also recommends changing the default login details and using a well-secured Wi-Fi network.
Do my rights end when the manufacturer’s warranty expires?
No. ACM ConsuWijzer distinguishes between a manufacturer’s warranty and your statutory rights: you can expect a product to work properly for a reasonable time under normal use, and the retailer is your point of contact. There isn’t a fixed number of years that applies to every router.
What should I check before buying a Wi-Fi router sold in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet European requirements and carry CE marking. Check the exact version being sold: a declaration of conformity for a different model or hardware version doesn’t prove that your version meets the requirements.